Screw Caps with Septa for 8-425 Screw Neck Vial
Product
    • screw caps with sapta
    • screw cap for 8-425 vials
    • 1.5ml 8-425 cap size
    • 8-425 closed top cap
    • ptfe silicone septa
    screw caps with sapta

    Screw Caps with Septa for 8-425 Screw Neck Vial

    Suitable for: 8-425 Screw Vials
    Caps Material: polypropylene
    Septa Material: PTFE / Silicone
    Septa Size: 8*1.5mm
    Cap Features: 5.5mm Centre Hole or Closed Top
    Color: Black, White or Customized
    TAGS:
    product description

    Description

    Caps

    Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

    Screw Cap Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly. 

    The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial.

    Septa

    PTFE/Silicone Septa:

    High quality, pure silicone is laminated to PTFE to give a pure, highly inert septum with excellent resealing characteristics even after repeated punctures.

    PTFE/Silicone septa are the preferred product for use in most HPLC and GC applications where resealability and high purity are critical. Works well for applications where ease of needle penetration is important.

    Septa-silica gel has strong repetitive sealability, and it can maintain good close performance after multiple injections; PTFE is a material with better chemical conditions at present, and it can withstand strong acids and alkalis. The two materials After compounding, the bottle can be used for various laboratory purposes such as sealed sampling, chemical storage and so on. 

    PTFE/Silicone/PTFE Septa:

    A layer of PTFE is laminated to each side of high purity, medium durometer silicone to form a septum that is the most resistant to coring while maintaining good resealing characteristics. The PTFE/Silicone/PTFE septum is recommended for the most critical applications such as ultra trace analysis or where there is a longer time between injections or for internal standard methods. PTFE/Silicone/PTFE septa provide superior performance with any autosampler employing a large diameter, blunt tip needle.

    Part No.

    Description

    S81

    White PTFE/Red Silicone Septa, Φ8*1.5mm

    S82

    Red PTFE/White Silicone Septa, Φ8*1.5mm

    S83

    Red PTFE/White Silicone/Red PTFE Septa, Φ8*1.5mm

    S811

    Pre-slit White PTFE/Red Silicone Septa, Φ8*1.5mm

    S822

    Pre-slit Red PTFE/White Silicone Septa, Φ8*1.5mm

    S844

    Pre-slit Blue PTFE/White Silicone Septa, Φ8*1.5mm

    C81

    8-425 Black Screw PP Cap, 5.5mm Centre Hole

    C82

    8-425 Black Screw PP Cap, Closed-top

    C83

    8-425 White Screw PP Cap, 5.5mm Centre Hole

    SC8181

    White PTFE/Red silicone septa, 8-425 Black Screw PP Cap, 5.5mm Centre Hole

    SC8281

    Red PTFE/White Silicone Septa, 8-425 Black Screw PP Cap, 5.5mm Centre Hole

    SC8381

    Red PTFE/White Silicone/Red PTFE Septa, 8-425 Black Screw PP Cap, 5.5mm Centre Hole

    SC81181

    Pre-slit White PTFE/Red Silicone Septa, 8-425 Black Screw PP Cap, 5.5mm Centre Hole

    SC8182

    White PTFE/Red silicone septa, 8-425 Black Screw PP Cap, Closed-top

    SC8183

    White PTFE/Red silicone septa, 8-425 White Screw PP Cap, 5.5mm Centre Hole

    Advantages

    The silicone / PTFE septa used were designed to provide the right amount of resistance to autosampler needles during the injection process so that they penetrate the vial properly without damaging the septa or the injection needle. 

    Too much or too little resistance to the needles can damage the septa, compromise resealing, cause needle blockage from coring of the septa material and even damage your autosampler. 

    These septa perform even when using a wide range of needles: fine, blunt or even dull. 

    Low sample or solvent evaporation performance even after multiple injections have been observed when using aijiren caps.

    Company Introduction

    1. Founded in 2007, Zhejiang Aijiren, Inc. specialized in chromatography consumables, such as autosampler vial for HPLC, headspace vial, GC vials, micro inserts, septa and caps, syringe filter, etc, covers more than 10000 square meters, and has clean workshop more than 2000 square meters. 100, 000 class cleaning room;  

    2. 15 years export experience, exprot to more than 70 countries, 2000+ customs around the world; 

    3. More than 10 years experience for automatic analytica technique

    4. Aijiren has own R&D Center and Quality Controll Center to keep products in high quality.

    5. All materials are produced at 100,000 grade clean room.

    6. Passed ISO9001:2015  quality management system certification, RoHS compliance can also be provided.

    FAQ
    01.
    How to confirm product quality before placing orders?
    After production, all articles are delivered to QC center, only qualified products can be release to the next procedure.
    Meanwhile, you are welcome to ask for samples for testing.
    02.
    How to star order or make payment?
    Proforma Invoice will be sent first after confirmation or order together with our bank infomations.
    Pay by T/T, Westren Union or Alipay.
    03.
    What is the charge standard about the Samples?
    1) For our first cooperation, free samples will be provide buyer afford the shipping cost.
    2) For our old customers, we will send free samples, even though new design samples, when have stocks.
    3) Samples delivery date is 24 to 48 hours, if have stocks. Customer design is about 3-7 days.
    04.
    Can you provide OEM service?
    Yes, we had already do OEM service for more than 4 world famous Brand in chromatography area.
    05.
    What is the MOQ?
    For vials, caps and syringe filters MOQ is 1pack(100pcs), for hand crimper/decrimper MOQ is 1pack(1pc).
    Inquiry
    Related products
    Inquiry