Na-enweghị atụ

A na-ejikarị 2ml clow cross na-ejikarị ihe nlere n'ime onwe ya maka nnwale. Ihe nlere na-abụkarị ihe na-agụ akwụkwọ. Ọ bụrụ na adịghị adị ọcha apụta na ihe ndị na-eme ihe nkiri kemịkal, ọ ga-emetụta nsonaazụ ule ahụ. Ya mere, anyị ga-eji sirinji mepụta, ma tinye ndị rereted reseds n'ime 2ml cross vial, wee tinye ya n'ime nke Autosampler maka nnwale.

Anijen hplen hplen na-enye ọtụtụ ihe na-enye ihe dịgasị iche iche na ihe dị iche iche maka nhọrọ, kwesịrị ekwesị maka nkwakọ ngwaahịa na nlele nke ziri ezi na ịmụ nwa nke chromatographity nyocha.

Na nyocha nke nyocha nke nyocha, na nzacha sirinji dị mkpa maka ijidegide iguzosi ike n'ihe site na iwepu urururutụ ahụ tupu nyocha. Agbanyeghị, conturthrough-ebe ụmụ irighiri ihe gafere na nzacha nwere ike ịrụpụta ihe na-emebi ihe. Ndị a bụ usoro isi iji gbochie okwu a:

30mm dayameta skiza:
Mpaghara Filtration: 4.9cm2
Ihe ulo ulo: polypropylene
Olu nke:<100 µl Sample volume: <120 ml Max. housing pressure: 8 bar Maximum Operating Temperature: 80°C (Housing only, also dependent on membrane) Maximum Operating Pressure: 87 psi (Housing only, also dependent on membrane)

Na Nchịkwa HPLC, nha uru nke ngwugwu nchịkọta nke chromatographic dị obere ma ọ dị mfe iji gbochie ya. Ya mere, ihe nlere na songles na-aga n'ihu tupu mgbe ọ na-aga n'ihu iji dozie ihe ndị na-abawanye ma chekwaa ngwa ahụ. Enwere ike iji nzacha siri na nyocha nke HPLC na Nchịkọta IC iji chekwaa ngwọta nlele, nke bụ nzọụkwụ dị mkpa na nlele pretrerement usoro. 
Ndị na-abụghị nke na-enweghị atụfu disters na-ejikọkarị ụlọ PP, nke a na-eme site na ihe dịka polypropylene. Thelọ ahụ nwere akpụkpọ ahụ, nke a na-ejikarị ihe ndị dị ka PTFE, PVDF, PMC, nke na-ezute nha nke ndị na-enweghị atụ, nke na-ekpebi nha nke ndị nwere ike iwepụ. Ọ dị na 13 mm na 25 mm diamher na 0.22 μm na 0.45 μm pore sizes. Nhọrọ nke COCE na-adabere na ngwa a kapịrị ọnụ, na obere pores dị obere na pores buru ibu maka ọnụego mmiri ngwa ngwa.

Onu igwe onyonyo bu 10-100 ml
Sprise: Luer-Lok ™
Onyinye mbupu: geer skil
Ejiri polypropylene nwere mgbanaka nwere agba maka njirimara
Poro dayameta na ụdị ihe nkiri edepụtara na ngalaba
Njiri mara mma na nke ọma
dị na usoro ihe dị ukwuu
na nhọrọ na-enweghị atụ.

13mm dayameta skiza:
Shere Ø: 13 mm
Mpaghara Filtration: 1.09 mm2
Ihe ulo ulo: polypropylene
Olu nke:<20 µl Sample volume: <10 ml Maximum Operating Temperature: 130°C (Housing only, also dependent on membrane) Maximum Operating Pressure: 87 psi (Housing only, also dependent on the membrane) Inlet: Luer locks female Outlet: Luer slipped male

A na-enyeghị ọgwụ mgbochi na-enweghị atụ na-enweghị atụ na-enweghị atụ na usoro nrụpụta akpaghị aka, na-agba mbọ iwepụ ihe nlele na kọlụm ọ bụla, na-agbatịkwu ndụ na ọdụ ụgbọ mmiri ma ọ bụ valvụ.

Lab-Serriza filters maka nyocha Hplc na Nnyocha MS, dị na Nylon, hydrophilic pvdf, PTFE, na ndị ọzọ. Atụmatụ ndị na-emepụta ihe na-eme ka ihe ndị dị ala na-eme ka ihe nkiri ISOCOMICE maka ileba anya n'ezi ihe na maka ihe nchebe.

Na Nchịkwa HPLC, nha uru nke ngwugwu nchịkọta nke chromatographic dị obere ma ọ dị mfe iji gbochie ya. Ya mere, ihe nlere na songles na-aga n'ihu tupu mgbe ọ na-aga n'ihu iji dozie ihe ndị na-abawanye ma chekwaa ngwa ahụ. Chromomatography, nke a na-ejikarị na nyocha gburugburu ebe obibi, na-achọkwa na enweghị pororenic ọgwụ ikuku na-eme ka a mata na ịgwọ ọrịa. Enwere ike iji nzacha siri na nyocha nke HPLC na Nchịkọta IC iji chekwaa ngwọta nlele, nke bụ nzọụkwụ dị mkpa na nlele pretrerement usoro.

Membranes ndị ọzọ dị.

Dị na abụọ dị iche iche dabara na ngwa
N'otu n'otu kechiri.
Ihe a na-ahụ maka oke ngwaahịa a chọtara n'ime ndepụta Since Spype, anyị na-enye ike oem maka injinịa, ịkpụzi, na ntinye ọ bụla ọzọ membrane ọ bụla na memplane nhọrọ.  
Ntinye ntinye n'ime ụlọ ọrụ dị ọcha site na ntuziaka yana nke na-akpaghị aka.
Aha akara: Aijen
Nchikota: 100pcs \ / PK
Maka iji (ngwa): GC, HPLC

Ememelane: PTFE, PVDF, PVDF, PMD, MPON, Nylon, PP, PP, PB, wdg, wdg.

AIJiren 0.45μm sirization na-enye ngwa ngwa maka ngwọta nke ihe ogbi ngwa ngwa ma rụọ ọrụ ngwa ngwa, na-echebe kọlụm na Nchọpụta HPLC site na ịkpụzi na-enweghị nchekwa ma na-agba mbọ.

A na-ejikarị 2ml clow cross na-ejikarị ihe nlere n'ime onwe ya maka nnwale. Ihe nlere na-abụkarị ihe na-agụ akwụkwọ. Ọ bụrụ na adịghị adị ọcha apụta na ihe ndị na-eme ihe nkiri kemịkal, ọ ga-emetụta nsonaazụ ule ahụ. Ya mere, anyị ga-eji sirinji mepụta, ma tinye ndị rereted reseds n'ime 2ml cross vial, wee tinye ya n'ime nke Autosampler maka nnwale.

Ihe owuwu nza ya na-eme ka ikike dị iche iche na-ebugharị na ọnụego ọsọsọ. Nke a na - egbochi ụlọ ọrụ azụ na - akpatakarị site na igbochi akpụkpọ ụkwụ na - enweghị nchebe.
Ihe ngosi akpụkpọ: nylon
Ụlọ: polypropylene (PP) ụlọ
Njikọ: Inlet: Nwanyị luer
Ọpụpụ: nwoke na-akpụ akpụ
Okpomoku di iche iche: 60 ℃
Pack: 100 nkeji \ / ngwugwu

Anijen hplen hplen na-enye ọtụtụ ihe na-enye ihe dịgasị iche iche na ihe dị iche iche maka nhọrọ, kwesịrị ekwesị maka nkwakọ ngwaahịa na nlele nke ziri ezi na ịmụ nwa nke chromatographity nyocha.

Na Nchịkwa HPLC, nha uru nke ngwugwu nchịkọta nke chromatographic dị obere ma ọ dị mfe iji gbochie ya. Ya mere, ihe nlere na songles na-aga n'ihu tupu mgbe ọ na-aga n'ihu iji dozie ihe ndị na-abawanye ma chekwaa ngwa ahụ. Enwere ike iji nzacha siri na nyocha nke HPLC na Nchịkọta IC iji chekwaa ngwọta nlele, nke bụ nzọụkwụ dị mkpa na nlele pretrerement usoro. 
Ndị na-abụghị nke na-enweghị atụfu disters na-ejikọkarị ụlọ PP, nke a na-eme site na ihe dịka polypropylene. Thelọ ahụ nwere akpụkpọ ahụ, nke a na-ejikarị ihe ndị dị ka PTFE, PVDF, PMC, nke na-ezute nha nke ndị na-enweghị atụ, nke na-ekpebi nha nke ndị nwere ike iwepụ. Ọ dị na 13 mm na 25 mm diamher na 0.22 μm na 0.45 μm pore sizes. Nhọrọ nke COCE na-adabere na ngwa a kapịrị ọnụ, na obere pores dị obere na pores buru ibu maka ọnụego mmiri ngwa ngwa.

Ptfe membranes bụ hyrophobic; Ha dị mma maka nzacha nke mmiri na-enweghị mmiri na gas.
Na-eguzogide na-eguzogide na-eme ka acid ma ọ bụ ntọala.
Nlele: Free
Ojiji: nyocha nyocha
Oem: dị

A na-ejikarị ndị Aninse mepụta nke a na-eme ka a na-ahụ maka adịghị ọcha n'ihe ndị na-eme ihe ọ bụla. Mgbe adịghị ọcha, a ga-a theụ ndị na-eme ihe ọ bụla ka ọ bụrụ onye na-eme ihe ọ bụla. Ọ bụrụ na ejighị sirinji, ọ nwere ike ibute nsogbu dịka ịmakụ ọnya na adịghị ọcha na onye ozi.

Otutu usoro igodo ihe maka ntinye nke Single Ahịrị.
Ike mbipụta mgbanwe dijitalụ tinyere arc na ihu igwe maka ebumnuche njirimara.
Ọnya na-acha uhie uhie maka eo na gamma.
Ọdị na-amaghị nwoke na-amaghị nwoke pp, hplc megide u \ / l mpụta.
Paymentkwụ: 100% T \ / T tupu oge eruo
Akwụkwọ Asambodo: ISO9001: 2015
Aha akara: Aijen

Aijiiren bụ onye nrụpụta chromatations kasị ukwuu na ndịda China. Enwere HPLC VIAL, GC VIAL, Septum na mmechi, EPA VIAL, Toc Vial, Tube, Reagent Conle na Aijen Shop na Aija. Nwere ike nweta ihe niile na ọnụahịa. Biko họrọ mkpa gị na katalọgụ zuru oke.

Ptfe membranes bụ hyrophobic; Ha dị mma maka nzacha nke mmiri na-enweghị mmiri na gas.
Na-eguzogide na-eguzogide na-eme ka acid ma ọ bụ ntọala.
Enwere ike ime ka mmanya ghara ịrahụ mmanya, mmiri na-esochi ya
Ejiri maka nzacha na de-na-elekọta
Na-enye ohere iji obere obere obere obere
Mmekọrịta Chemically maka ịlele kemịkal siri ike nke bibie ihe ndị ọzọ
Ihe mgbochi mmiri maka ngwa na ngwa nchekwa
Ezigbo maka nlele aerosol
Nhazi Nlele Nchọgharị Nchọpụta HPLC
Mgbe ị na-a alcoholụ mmanya na-egbu egbu, nwere ike iji ya maka iwepụ ihe nke ọma mma nke ihe ọ bụla dị nro na chromatography

Nnukwu ọcha polypropylene dị elu, enweghị nku ma ọ bụ ụcha agbakwunyere
Ụdị ọ bụla dị ka dị ka nke a na-ejikọ ọnụ na ngwugwu gamma
Gbọmgbọ mmiri dị iche iche na-eme ka ọ dị elu na-abawanye olu ma belata nrụgide azụ
Edebere agba maka njirimara dị mfe
Ebe Si Malite: China (Mainland)
Nlele: Free
Paymentkwụ: 100% T \ / T tupu oge eruo

A na-ejikọ ya na nkwalite AIJIRILE bụ nke na-abụghị nke na-enweghị atụ maka nkwadebe HPLC na 0.25UM pore site na kọlụm chromatographic kọọm ma belata valvụ.

AIJIREN Syriza filer bụ naanị ihe nzacha dị mma, na-ekpokọta nke ọma, ma na-enye ya na asọmpi mara mma na asọmpi.
25mm dayaza nzacha:
Nyo Ø: 25 mm
Mpaghara Filtration: 4.08 cm2
Ihe ulo ulo: polypropylene
Olu nke:<100 µl Sample volume: <100 ml

Ihe nzacha sirinji mepụtara site na Aijenten sitere na njiri mara mma, na-elekọta ma resị ya na ọnụahịa kwesịrị ekwesị. Ha dị mma maka ọtụtụ n'ime akpụkpọ ahụ mehua, gụnyere Nylon, PTFE, Pes, MPE, PVDF, PP na GF. Ha dị na 13mm, 17mm, 25mm na usoro 30mm, ma jiri shei dị ọcha.

Otu n'otu n'otu pack, 100pcs kwa mkpọ, 40PK \ / Carton.56 * 50 * 26CM.

Ememelane: PTFE, PVDF, PVDF, PMD, MPON, Nylon, PP, PP, PB, wdg, wdg.

Ongers na-enweghị atụ, ngwaọrụ ndị eji eme ihe na ntọala ntọala na usoro ọgwụ na nyochara ma gbanye mmiri mmiri tupu agba nyocha ma ọ bụ nyocha. Ezubere ihe nzacha ndị a iji wepu adịghị ọcha, nsogbu, nje na ihe ndị ọzọ na-esite site na mmiri ngwọta nwere enweghị mmerụ ọ bụla nwere mmerụ ọ bụla. Ndị na-enweghị atụ na-eme ihe na-abụkarị nke PP ụlọ, nke na-eme site na ihe dịka polypropylene. Thelọ ahụ nwere akpụkpọ ahụ, nke a na-ejikarị ya eme ihe dịka PTFE, PVDF, PSC, NYL. Ọ dị na 13 mm na 25 mm diamher na 0.22 μm na 0.45 μm pore sizes. Nhọrọ nke COCE na-adabere na ngwa a kapịrị ọnụ, na obere pores dị obere na pores buru ibu maka ọnụego mmiri ngwa ngwa.

Ihe na-enweghị atụ na-enweghị atụ bụ diski a na-enweghị atụ maka Taịlị maka ụlọ nyocha, adabara maka nlele pretretution na nyocha HC. Ihe nzacha ndị a nwere ike nke ọma na-achọpụta ihe nmebitus na ngwọta, chebe chromatographic kọlụm na ụrọ, ma hụ na izi ezi na ịmụgharị uche nke nsonaazụ.

A na-atụfu ihe nzacha na-acha uhie uhie na-enweghị atụ na nzacha nke obere mpịakọta (ruo 100 ml) nke ngwọta ndị mmadụ. Ha na-egosipụta ụlọ obibi polyproposene ma dị n'ụdị dị iche iche gụnyere PTFE, Nylon, Pvdf, wdg mizes 0.22 na 0.45 micron dị.

A na-eme ka ndị na-eweta teknụzụ zuru ụwa ọnụ na-eme ihe nkiri na-eme ihe nkiri. Ntụle mmiri na-ere ahịa dị ka tube conto.

1.membrane: ptfe, pvdf, pes, mce, nylon, pp, cp, ca, wdg.
2.pore nha: 0.22UM \ / 0.4UM
3.Dimeter: 13mm \ / 25mm
4.Onise ihe: PP
Okpukwe (ML): 13mm<10ml; 25mm<100ml

Njirimara nke PES Siling fileters

Mgbake dị elu nke na-ebute ala;

Ikike nhazi dị elu;

Iwepụ microbial;

Mgbakwunye protein na obere wepụta;

Ihe eji eme ihe puru iche nke nwere 0.45μm PES SEMBrane usoro nlereanya olu vs na nzacha na-enyocha ya, ịgbatị ndụ ọrụ.

30mm dayameta skiza:
Mpaghara Filtration: 4.9cm2
Ihe ulo ulo: polypropylene
Olu nke:<100 µl Sample volume: <120 ml Max. housing pressure: 8 bar Maximum Operating Temperature: 80°C (Housing only, also dependent on membrane) Maximum Operating Pressure: 87 psi (Housing only, also dependent on membrane)

0.22μm micron mirter dị mkpa maka nkwadebe Hplc nlele na nzacha na-enweghị atụ, na-eweta mwepụ nke nje, na microorganisms
Dị na 13mm, 25mm, na 33mm diamhers, yana ihe ndị dị ka nylon, PVDF, Prein Protematives maka ụlọ ọrụ na-arụ ọrụ

Syrile filers bụ ngwaọrụ ndị dabara na njedebe nke sirinji ma emepụtaghị ya iji kpoo ihe na-adịghị mma site na mmiri mmiri ma ọ bụ gas. Ha mejupụtara akpụkpọ ahụ na-enye ohere ị liquụ mmiri ga-agafe mgbe ị na-ejigide ihe ndị siri ike. Akụkụ mgbochi ahụ na-adakwasị na nzacha ahụ anaghị ewebata ihe mmetọ ọ bụla n'ime ihe nlele a na-ahazi.

Ojiji: nyocha nyocha
Logo: Anakwere Akwa
Azụmaahịa: Aijenruren
Si Malite: China
Oem: dị
Nlele: enyere ya n'efu

Atụmatụ 6 memplane (PTFE \ / PVDF \ / Puypropylene ụlọ, aha ha niile nke 13 \ /3mm. Ihe osise microsrocrams na-ahụ anya. Red PTFE na-enyocha mma maka ihe mgbazinye ahịhịa.

Hydrophobic Ptfe Sintee
Ihe ngosi ego nke 13mm PTFE na-egosiputa hydrootic, kemịkal na -eche membrane nwere pores 0.22m Uwe dị elu maka njigide na-aga. Nzinye ọ bụla nwere 100 nzasị na Luer-polypropyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyylene-na-efu efu na autoclavidble (121 ° C, 30min). ISO9001 dị mma - na-achịkwa site na nyocha na-abata site na nchekwa nchekwa. Ebe a na-ebi akwụkwọ akara ngosi. Ezigbo maka nyocha zuru oke.

Dị na nhọrọ na-enweghị atụ

A na-enweta igwefoto ehiringen dị iche iche na AIJiren, dayameta nke disince nzacha bụ 13mm, 25mm, na 30mm. Ọ bụrụ na ịchọrọ paramita ndị ọzọ siri ike, ị nwere ike ịjụ ahịa azụmahịa anyị. Dị ka anyị niile si mara, a na-eji syrte ahụ maka ịkwadebe nlele na usoro Chromatographtograit.

Ibufe ngwa ngwa, enwere ike ibugharị ngwongwo niile na 3-7DAYS. Ngwaahịa buru ibu dị na ngwaahịa maka ndị ahịa.

HPLCSyyyyryyyryyyryyyrry ndị dị mkpa maka Chromatographgraphgraptography na iji nkwadebe nyocha. Ha na - ewepụ ngwa ngwa iji chekwaa kọlụm ma gbochie crogging, ebe ụlọ dị ala na - ala ọtọ na-echekwa ịdị ọcha. Ihemslọ akpụkpọ ahụ dịnụ gụnyere Nylon, PVDF, PTFE, MPE, na ọgwụ na-eme ọgwụ, biotech, na nnwale-anwale.

Enwere ike iji nzacha siri na nyocha nke HPLC na Nchịkọta IC iji chekwaa ngwọta nlele, nke bụ nzọụkwụ dị mkpa na nlele pretrerement usoro.

Lab-Serriza filters maka nyocha Hplc na Nnyocha MS, dị na Nylon, hydrophilic pvdf, PTFE, na ndị ọzọ. Atụmatụ ndị na-emepụta ihe na-eme ka ihe ndị dị ala na-eme ka ihe nkiri ISOCOMICE maka ileba anya n'ezi ihe na maka ihe nchebe.

Mgbe ịlele ihe nlele na-ahọrọ nri akpụkpọ ahụ sirinji dị ezigbo mkpa. Ọ bụrụ n'ịhọrọ syrinte na-ezighi ezi na Nchọpụta Chromatogpy gị, nke nwere ike imebi ọtụtụ oge na ego kemgbe mmiri dị oke ọnụ. Anijen na-enye ndị na-enweghị ike na-enweghị atụ na nke na-enweghị atụ na-enweghị atụ na Nylon, PTFE, PTFE, PTC. whatsapp: +

Ptfe membranes bụ hyrophobic; Ha dị mma maka nzacha nke mmiri na-enweghị mmiri na gas.
Ike siri ike na intertia
Ndị na-abụghị pyragenic, na DNA? inwere enwe
Autoclavel
Akụkụ ngwaahịa 3.45 x 3.45 x 3.45; 4.97 ounces
Ihe dị arọ 5 ounces
Asambodo: ISO9001: 2022
Ebe Si Malite: China (Mainland)

Aijiiren bụ onye na-ebubata ihe ndị na-eweta Chromatoting na-eweta, nwere ike inye HPLC VIals, HPLC Syrin, EPA VOALS, na ụfọdụ ụzọ nnwale.
Actionchọ ihe ọ bụla maka chromatography na-eripịa ihe, biko kpọtụrụ anyị.

13mm dayameta skiza:
Shere Ø: 13 mm
Mpaghara Filtration: 1.09 mm2
Ihe ulo ulo: polypropylene
Olu nke:<20 µl Sample volume: <10 ml Maximum Operating Temperature: 130°C (Housing only, also dependent on the membrane) Maximum Operating Pressure: 87 psi (Housing only, also dependent on the membrane)

Na Nchịkwa HPLC, nha uru nke ngwugwu nchịkọta nke chromatographic dị obere ma ọ dị mfe iji gbochie ya. Ya mere, ihe nlere na songles na-aga n'ihu tupu mgbe ọ na-aga n'ihu iji dozie ihe ndị na-abawanye ma chekwaa ngwa ahụ. Chromomatography, nke a na-ejikarị na nyocha gburugburu ebe obibi, na-achọkwa na enweghị pororenic ọgwụ ikuku na-eme ka a mata na ịgwọ ọrịa. Enwere ike iji nzacha siri na nyocha nke HPLC na Nchịkọta IC iji chekwaa ngwọta nlele, nke bụ nzọụkwụ dị mkpa na nlele pretrerement usoro.

Na Nchịkwa HPLC, nha uru nke ngwugwu nchịkọta nke chromatographic dị obere ma ọ dị mfe iji gbochie ya. Ya mere, ihe nlere na songles na-aga n'ihu tupu mgbe ọ na-aga n'ihu iji dozie ihe ndị na-abawanye ma chekwaa ngwa ahụ.

Aijen na-enye Aijen nhọrọ dị oke mkpa nke gosipụtara, ma ọnụ ọgụgụ sirinji na-akwụ ụgwọ na ngwaahịa na njikere ụgbọ mmiri taa. Ahọrọ maka ịdịte aka ha, ụdị ihe onwunwe, na njirimara arụmọrụ anyị, ihe nzacha anyị siri ike na-ebuputa ezi uche, nke a na-arụpụta ihe na-akpata obere ihe na-akwụ ụgwọ.
Dayameta: 13mm na 25mm
Ogo PORE: 0.22UM na 0.45UM
Pund-Punes-Push
Flotlọ Ntanetị: Polypropylene \ / dị elu polyethylene
Asambodo Asambodo Asambodo: Ọkpụkpụ ọgwụ

Ngwa:
• Nkwadebe HPLC dị omimi
• Nkwadebe nlele ndu
• Ngwọta Ngwọta
• Ngwọta nnu
• Media ọdịnala
• Ngwọta ogbugba mmiri
• Ibepụ iche
• Jiri ọgwụ ọgwụ, na-enweghị atụ frotein protein, mgbasa ozi ọdịnala, mgbakwunye.

Dị na abụọ dị iche iche dabara na ngwa
N'otu n'otu kechiri.
Ihe a na-ahụ maka oke ngwaahịa a chọtara n'ime ndepụta Since Spype, anyị na-enye ike oem maka injinịa, ịkpụzi, na ntinye ọ bụla ọzọ membrane ọ bụla na memplane nhọrọ.  
Ntinye ntinye n'ime ụlọ ọrụ dị ọcha site na ntuziaka yana nke na-akpaghị aka.
Aha akara: Aijen
Nchikota: 100pcs \ / PK
Maka iji (ngwa): GC, HPLC

Akụkụ abụọ a na-egosi inlet mkpọchi mkpọchi, na-enyere njikọ aka na Sirta.
Ezubere ha ịbụ ụcha na-acha odo odo na akara maka njirimara dị mfe site na nha.
Ma ọ bụ nha abụọ nwere ike ịhazi maka ebumnuche ndị na-agagharị.

Membranes ndị ọzọ dị.

Ihe nzacha akpụkpọ ahụ bụ otu n'ime ndị na-eri ihe a na-ejikarị na tactoraties. Akpụkpọ ụkwụ microporol
Proụnye NY, PTFE, PVDF, M.A., ca na ndị ọzọ.
Biko họrọ nyocha ahụ dị mma dị ka mkpa gị.

Na nyocha hplc, akwara urukuru nke ngwugwu ngwugwu dị obere ma site na ihe adịghị ọcha site na nkwari. Ya mere, ihe nlere na songles na-aga n'ihu tupu mgbe ọ na-aga n'ihu iji dozie ihe ndị na-abawanye ma chekwaa ngwa ahụ. Dị iche iche site na nha dị iche iche na-enyocha mmetọ dị iche iche nha. Otu n'otu n'otu ngwugwu, 100pcs kwa mkpọ, 40PK \ / Carton.56g. Trays na PP-tracy ihe nkiri ma na-ekpuchi efere achịcha oem.

Emebere Nyịn Nylon Singer maka iji ụlọ nyocha, na-enye akpụkpọ ahụ hydrophic nke dabara adaba na ngwọta osisi. A maara ya maka njikọta protein ya dị elu, na-eme ya dị mma maka ngwọta protein, ma na-eguzogide mmanya na DMSO.

A na-ejikarị ihe nrịba ama ọfụma na sayensị nyocha nke sayensị iji wepu ụfọdụ ihe irighiri ihe ma ọ bụ nje mmiri site na ụfọdụ olu mmiri ma ọ bụ gas. A na-eji sọọsọ 0.45um siriza na-ewu ewu na nyocha hplc.

A na-enyeghị ọgwụ mgbochi na-enweghị atụ na-enweghị atụ na-enweghị atụ na usoro nrụpụta akpaghị aka, na-agba mbọ iwepụ ihe nlele na kọlụm ọ bụla, na-agbatịkwu ndụ na ọdụ ụgbọ mmiri ma ọ bụ valvụ.

Nkoko: Otutu ngwugwu, 100pcs kwa mkpọ, 40PK \ / Carton) enwere ike inye ya ihe nkiri.

AIJiren 0.45μm sirization na-enye ngwa ngwa maka ngwọta nke ihe ogbi ngwa ngwa ma rụọ ọrụ ngwa ngwa, na-echebe kọlụm na Nchọpụta HPLC site na ịkpụzi na-enweghị nchekwa ma na-agba mbọ.

A na-eji AIJIRE Skinse maka ngwa ngwa ma nwee ntụkwasị obi nke obere ihe nlele. Ejikọwo ya na ngalaba nzacha ma na-ejikwa ụlọ ọrụ.
Dayameta: 13mm na 25mm
Ogo PORE: 0.22UM na 0.45UM
Okpomoku di iche iche: 60 ℃
Ibe mmiri: Autoclave na 121 ℃ maka nkeji iri abụọ

Ogo ✅uniform na - enweghị ntụpọ - ptfe sirinji na otu na - enwe pore size, dị elu, na arụmọrụ dị elu. Ke dayameta 3mm dayameta, 0.22μm, nha nha, 100 pcs amachiwo.
Asambodo dị elu - ISO 9001, na-ejide ogo nzacha site na nyocha nke mbụ, nyocha na-egbochi nyocha, na nchegharị nchedo.
A na-emechachafụ ndị na-enyocha ya - PTFE na-enweghị atụ - nke na-eji ego polypropylene (PP) mee ihe (enweghị ike igbochi ya, enweghịkwa mmerụ ahụ, na enweghị ndọtị ahụ. Ọ nwere ike na-aghọkwa ya na igba ogwu na 121 Celsius C \ / 249.8 ℉ ruo minit 30.
Nlele: Free
Paymentkwụ: 100% T \ / T tupu oge eruo
Akwụkwọ Asambodo: ISO9001: 2015

Na nyocha nke nyocha nke nyocha, na nzacha sirinji dị mkpa maka ijidegide iguzosi ike n'ihe site na iwepu urururutụ ahụ tupu nyocha. Agbanyeghị, conturthrough-ebe ụmụ irighiri ihe gafere na nzacha nwere ike ịrụpụta ihe na-emebi ihe. Ndị a bụ usoro isi iji gbochie okwu a:

Nkoko: Otutu ngwugwu, 100pcs kwa mkpọ, 40PK \ / Carton) enwere ike inye ya ihe nkiri.

Na Nchịkwa HPLC, nha uru nke ngwugwu nchịkọta nke chromatographic dị obere ma ọ dị mfe iji gbochie ya. Ya mere, ihe nlere na songles na-aga n'ihu tupu mgbe ọ na-aga n'ihu iji dozie ihe ndị na-abawanye ma chekwaa ngwa ahụ. Chromomatography, nke a na-ejikarị na nyocha gburugburu ebe obibi, na-achọkwa na enweghị pororenic ọgwụ ikuku na-eme ka a mata na ịgwọ ọrịa. Enwere ike iji nzacha siri na nyocha nke HPLC na Nchịkọta IC iji chekwaa ngwọta nlele, nke bụ nzọụkwụ dị mkpa na nlele pretrerement usoro.

Onu igwe onyonyo bu 10-100 ml
Sprise: Luer-Lok ™
Onyinye mbupu: geer skil
Ejiri polypropylene nwere mgbanaka nwere agba maka njirimara
Poro dayameta na ụdị ihe nkiri edepụtara na ngalaba
Njiri mara mma na nke ọma
dị na usoro ihe dị ukwuu
na nhọrọ na-enweghị atụ.

13mm dayameta skiza:
Shere Ø: 13 mm
Mpaghara Filtration: 1.09 mm2
Ihe ulo ulo: polypropylene
Olu nke:<20 µl Sample volume: <10 ml Maximum Operating Temperature: 130°C (Housing only, also dependent on membrane) Maximum Operating Pressure: 87 psi (Housing only, also dependent on the membrane) Inlet: Luer locks female Outlet: Luer slipped male