Ensuring peak purity in liquid chromatography begins with effective sample preparation. The 0.45µm PTFE syringe filter is the industry standard for clarifying samples containing aggressive organic solvents. Designed for compatibility with chemically harsh matrices, these filters prevent column blockage and protect your HPLC instrumentation from particulate damage.
13mm diameter syringe filter: Filter Ø: 13 mm Filtration area: 1.09 mm2 Housing material: polypropylene Holdup volume: <20 µl Sample volume: <10 ml Maximum Operating Temperature: 130°C (Housing only, also dependent on membrane) Maximum Operating Pressure: 87 psi (Housing only, also dependent on the membrane) Inlet: Luer locks female Outlet: Luer slipped male
30mm diameter syringe filter: Filtration area: 4.9cm2 Housing material: polypropylene Holdup volume: <100 µl Sample volume: <120 ml Max. housing pressure: 8 bar Maximum Operating Temperature: 80°C (Housing only, also dependent on membrane) Maximum Operating Pressure: 87 psi (Housing only, also dependent on membrane)
The syringe filter produced by Aijiren is often used to filter impurities in the reagents to be tested. After the impurities are filtered, the reagents can be sucked into the autosampler. If the syringe filter is not used, it may cause problems such as clogging the needle hole with impurities in the reagent.
Lab-grade syringe filters engineered for HPLC and MS analysis, available in Nylon, Hydrophilic PVDF, PTFE, and more. Features low extractables and ISO-certified biocompatibility for sample integrity and instrument protection.
