AIJIREN 2ml Sample Vials | Screw/Snap/Crimp Tops | Agilent/Shimadzu Compatible

Aijiren polypropylene snap ring micro vials can be used with most standard GC and LC autosamplers. These lightweight, economical vials are made from durable polypropylene with good chemical resistance. The tapered interior ensures maximum collection of contents without the hassle of removable inserts. With body size of 12*32mm makes it compatible with most autosamplers such as Agilent, Varian, etc. Snap/crimp top compatible with caps that are used with 11mm snap ring vial and crimp neck vial ND11.

Aijiren 11mm polypropylene snap micro vials can be used in most standard gas and liquid chromatography autosamplers. Universally usable vials for almost all autosamplers, even those with robotic handling. Vials can also be crimped with a standard 11mm Aluminum Crimp Seal. The conical interior ensures maximum retrieval of contents without the hassle of using removable inserts. Plastic bottle with thinner penetration point, made of polyethylene, suitable for snap ring bottles and crimp top bottles ND11. Snap/Crimp Top Compatible with caps for use with 11mm PP Micro-Vial Snap Ring/Crimp.

Preassembled polypropylene snap-top closures with a 6mm center hole, including  PTFE/silicone septa. To use with 11mm snap-top vials. Snap caps provide a secure seal, minimizing evaporation even with volatile samples. Snap ring closures N11 should only be used in HPLC, as the punctual compacting pressure of the septum against the vial rim by the four pins in the cap does not achieve the same level of tightness as the evenly applied pressure through a screw thread or by crimping.

A 2ml snap autosampler vial is widely used in HPLC applications and can be used almost as universal sample vials for autosamplers, including sample vials with automatic operation. The vial features an 11mm snap ring closure, which provides a secure and leak-proof seal. These 2ml snap autosampler vials are recommended for short-term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal. Vials have a 40% larger opening than standard aluminum seal vials for easier sample filling and to reduce the chance of bent or broken needles during sampling. Compared with crimp top vials, snap vials can be capped and uncapped easily without tools, making it more convenient to use.

Aijiren polypropylene snap micro vials can be used in most standard gas and liquid chromatography autosamplers. These lightweight, economical vials are made from durable polypropylene which has good chemical resistance. The conical interior ensures maximum retrieval of contents without the hassle of using removable inserts. A body size of 12*32mm makes it compatible with most autosamplers such as Agilent, Varian, etc. Snap/crimp top compatible with caps that are used with 11mm snap ring vial and crimp neck vial ND11. PP Micro Vial with one of our seals can be obtained as a 2in1 KIT Special Push-On Cap with a thinner penetration point made of Polyethylene for Snap Ring Vials and Crimp Neck Vials ND11.

Bottle type: snap-top sample bottle (ND11 standard)
Capacity: 1.5mL
Dimensions: Ø11mm × height 32mm
Bottle model:
・V1013: Transparent bottle (5.0 type)
・V1025: Transparent bottle with writing area
・V1036: Amber bottle
・V1046: Amber bottle with writing area
Cap system:
・SC10202: Red PTFE/white silicone + blue cap (6mm hole)
・SC10101: White PTFE/red silicone + natural color cap

Screw Thread Top​​: 8mm/9mm neck, clear/amber options, pre-slit PTFE/silicone septa, autosampler compatible
​​Snap Top​​: 11mm neck, quick-seal design, clear/amber options
​​Crimp Top​​: 11mm neck, graduated markings, ideal for precision experiments
​​Compatibility​​: Works with Agilent, Shimadzu, Thermo Fisher instruments
​​Advantages​​: ISO9001:2015 certified, 50% cheaper than brand-name alternatives, customizable packaging

Aijiren 2 mL crimp top vials are our recommended vials for gas chromatography applications. The crimp top vials are the best option for customers concerned with evaporation of their volatile samples, as the crimp seal significantly reduces the opportunity for evaporation. Crimp vials are also used for samples in which chain-of-custody or tamper-proof closures are required. 2 mL crimp top vials are manufactured from type 1 borosilicate glass. The high-quality material has very low metal content to help avoid sample deterioration or leaching. Precisely shaped bottlenecks increase autosampler throughput. Made of PTFE/silicone fusion, this septum has excellent inertness and can be used for multiple injections.

The 11mm snap-top caps are made of high-quality polypropylene. The caps have a roll-edge or snap-on shape. The snap-top caps provide a secure seal that minimizes evaporation even for volatile samples. PTFE/silicone septa are the product of choice for most HPLC and GC applications where resealability and high purity are critical. Ideal for applications where ease of needle insertion is important. Silicone septa have strong re-sealing properties and can still maintain good sealing performance after multiple injections; PTFE is currently a material with good chemical conditions and can withstand strong acids and alkalis. After the two materials are combined, the bottle can be used for various laboratory purposes such as sealed sampling and chemical storage.

11mm snap top autosampler vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Caps are made of high-quality polypropylene, Caps have the profile of a crimp or snap closure for compatibility with robotic autosamplers, Pre-assembled septa reduce the chance of contamination during sample preparation while saving sample preparation time in the lab. Snap caps provide a secure seal, minimizing evaporation even with volatile samples, The audible click ensures that a secure seal has been formed and the cap is properly applied.

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

Main applications for Plastic vials are atomic absorption, water and protein analysis, capillary electrophoresis, ion chromatography etc.
Optimal choice when working with proteins. Ideal for IC applications

Aijiren 11mm snap ring vials have a volume of 1.5mL and eliminate the need for crimpers or decapping tools. Recommended for HPLC applications only. Snap ring vials eliminate the need for crimping and decapping tools. 40% larger opening improves sample accessibility and reduces the risk of autosampler needle damage. Optional white ceramic writing patch and fill marks for easy labeling. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short-term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

2ml snap autosampler vial is widely used in HPLC applications and can be used almost as universal sample vials for autosamplers, including sample vials with automatic operation. The vial features an 11mm snap ring closure, which provides a secure and leak-proof seal. Snap ring closures are easy to use and ensure that the vial remains tightly sealed during sample storage and analysis. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

Type: One-piece snap-on seal cap
Opening: 6mm center hole
Key models:

SC10202: Red PTFE/white silicone + blue cap

SC10301: Three-layer septum + natural color cap

SC10101: Pre-opened white PTFE/red silicone

Aijiren 11mm snap ring vials have a volume of 1.5mL and eliminate the need for crimpers or decapping tools. Recommended for HPLC applications only. Snap ring vials eliminate the need for crimping and decapping tools. 40% larger opening improves sample accessibility and reduces the risk of autosampler needle damage. Optional white ceramic writing patch and fill marks for easy labeling. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short-term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

Type: One-piece snap-on seal cap
Opening: 6mm center hole
Key models:

SC10202: Red PTFE/white silicone + blue cap

SC10301: Three-layer septum + natural color cap

SC10101: Pre-opened white PTFE/red silicone

Aijiren 11mm polypropylene snap micro vials can be used in most standard gas and liquid chromatography autosamplers. Universally usable vials for almost all autosamplers, even those with robotic handling. Vials can also be crimped with a standard 11mm Aluminum Crimp Seal. The conical interior ensures maximum retrieval of contents without the hassle of using removable inserts. Plastic bottle with thinner penetration point, made of polyethylene, suitable for snap ring bottles and crimp top bottles ND11. Snap/Crimp Top Compatible with caps for use with 11mm PP Micro-Vial Snap Ring/Crimp.

Screw Thread Top​​: 8mm/9mm neck, clear/amber options, pre-slit PTFE/silicone septa, autosampler compatible
​​Snap Top​​: 11mm neck, quick-seal design, clear/amber options
​​Crimp Top​​: 11mm neck, graduated markings, ideal for precision experiments
​​Compatibility​​: Works with Agilent, Shimadzu, Thermo Fisher instruments
​​Advantages​​: ISO9001:2015 certified, 50% cheaper than brand-name alternatives, customizable packaging

11mm snap top autosampler vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

A 2ml snap autosampler vial is widely used in HPLC applications and can be used almost as universal sample vials for autosamplers, including sample vials with automatic operation. The vial features an 11mm snap ring closure, which provides a secure and leak-proof seal. These 2ml snap autosampler vials are recommended for short-term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal. Vials have a 40% larger opening than standard aluminum seal vials for easier sample filling and to reduce the chance of bent or broken needles during sampling. Compared with crimp top vials, snap vials can be capped and uncapped easily without tools, making it more convenient to use.

2ml snap autosampler vial is widely used in HPLC applications and can be used almost as universal sample vials for autosamplers, including sample vials with automatic operation. The vial features an 11mm snap ring closure, which provides a secure and leak-proof seal. Snap ring closures are easy to use and ensure that the vial remains tightly sealed during sample storage and analysis. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

Aijiren polypropylene snap micro vials can be used in most standard gas and liquid chromatography autosamplers. These lightweight, economical vials are made from durable polypropylene which has good chemical resistance. The conical interior ensures maximum retrieval of contents without the hassle of using removable inserts. A body size of 12*32mm makes it compatible with most autosamplers such as Agilent, Varian, etc. Snap/crimp top compatible with caps that are used with 11mm snap ring vial and crimp neck vial ND11. PP Micro Vial with one of our seals can be obtained as a 2in1 KIT Special Push-On Cap with a thinner penetration point made of Polyethylene for Snap Ring Vials and Crimp Neck Vials ND11.

Aijiren 2 mL crimp top vials are our recommended vials for gas chromatography applications. The crimp top vials are the best option for customers concerned with evaporation of their volatile samples, as the crimp seal significantly reduces the opportunity for evaporation. Crimp vials are also used for samples in which chain-of-custody or tamper-proof closures are required. 2 mL crimp top vials are manufactured from type 1 borosilicate glass. The high-quality material has very low metal content to help avoid sample deterioration or leaching. Precisely shaped bottlenecks increase autosampler throughput. Made of PTFE/silicone fusion, this septum has excellent inertness and can be used for multiple injections.

Preassembled polypropylene snap-top closures with a 6mm center hole, including  PTFE/silicone septa. To use with 11mm snap-top vials. Snap caps provide a secure seal, minimizing evaporation even with volatile samples. Snap ring closures N11 should only be used in HPLC, as the punctual compacting pressure of the septum against the vial rim by the four pins in the cap does not achieve the same level of tightness as the evenly applied pressure through a screw thread or by crimping.

Aijiren polypropylene snap ring micro vials can be used with most standard GC and LC autosamplers. These lightweight, economical vials are made from durable polypropylene with good chemical resistance. The tapered interior ensures maximum collection of contents without the hassle of removable inserts. With body size of 12*32mm makes it compatible with most autosamplers such as Agilent, Varian, etc. Snap/crimp top compatible with caps that are used with 11mm snap ring vial and crimp neck vial ND11.

Main applications for Plastic vials are atomic absorption, water and protein analysis, capillary electrophoresis, ion chromatography etc.
Optimal choice when working with proteins. Ideal for IC applications

Bottle type: snap-top sample bottle (ND11 standard)
Capacity: 1.5mL
Dimensions: Ø11mm × height 32mm
Bottle model:
・V1013: Transparent bottle (5.0 type)
・V1025: Transparent bottle with writing area
・V1036: Amber bottle
・V1046: Amber bottle with writing area
Cap system:
・SC10202: Red PTFE/white silicone + blue cap (6mm hole)
・SC10101: White PTFE/red silicone + natural color cap

Caps are made of high-quality polypropylene, Caps have the profile of a crimp or snap closure for compatibility with robotic autosamplers, Pre-assembled septa reduce the chance of contamination during sample preparation while saving sample preparation time in the lab. Snap caps provide a secure seal, minimizing evaporation even with volatile samples, The audible click ensures that a secure seal has been formed and the cap is properly applied.

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

The 11mm snap-top caps are made of high-quality polypropylene. The caps have a roll-edge or snap-on shape. The snap-top caps provide a secure seal that minimizes evaporation even for volatile samples. PTFE/silicone septa are the product of choice for most HPLC and GC applications where resealability and high purity are critical. Ideal for applications where ease of needle insertion is important. Silicone septa have strong re-sealing properties and can still maintain good sealing performance after multiple injections; PTFE is currently a material with good chemical conditions and can withstand strong acids and alkalis. After the two materials are combined, the bottle can be used for various laboratory purposes such as sealed sampling and chemical storage.