High – Capacity HPLC Vials | Complimentary Samples Offered

Zhejiang Aijiren Technology, Inc. is a global supplier of life-science, chemistry, laboratory consumables, etc. Our major products are high performance liquid chromatography & gas chromatography consumables such as Chromatography Autosampler Vials with closures, inserts, crimper and syringe filters, etc; Water analysis consumables such as COD test tube.

This sample cell has a 25×95mm bottom, which provides excellent stability on laboratory surfaces and test equipment. The design allows for consistent positioning in spectrophotometers and other instruments, ensuring repeatable and accurate measurements.

Round bottom vials are designed for Perkin Elmer™, Tekmar™ and Varian™ units

Sterile syringe filters are single-use devices that fit on the end of a syringe and are specifically designed to filter particulate impurities from liquids or gases. They consist of a membrane that allows liquids to pass through while retaining solid particles. The sterility aspect ensures that the filter does not introduce any contaminants into the sample being processed.

IP150-IV250 series micro inserts enable trace-level analysis for GC, HPLC/UHPLC, and MS applications. Compatible with 8-425, 9mm short thread, 10-425, and 11mm snap/crimp vials. Engineered with zero-adsorption technology and minimal dead volume for optimal sample integrity

13mm diameter syringe filter:
Filter Ø: 13 mm
Filtration Area: 1.09 mm2
Housing material: polypropylene
Holdup volume: <20 µl Sample volume: <10 ml Maximum Operating Temperature: 130°C (Housing only, also dependent on the membrane) Maximum Operating Pressure: 87 psi (Housing only, also dependent on the membrane)

Wholesales Chemical Oxygen Demand Tubes with a cap from China Aijiren Tech.Aijiren is the leading supplier of Chemical Oxygen Demand Tubes from China.

Packing: 6pcs per pack, 4PK/carton.63.5*43.5*26.5cm. 15KG. packed in PP-Trays with plastic film and cover plate,neutral cartons outside OEM packing can be also provided. Permanent white enamel graduations markings. For general purpose laboratory applica

ThisAmber 1000ml Reagent Bottle is made from borosilicate glass and is great for containing liquids and powders that are light sensitive. When pouring hot liquids into an Amber 1000ml Reagent Bottle or placing the bottle in the refrigerator, the lid should be propped open with a toothpick or other small object until the liquid and bottle are cool

Aijiren’s Micro Vials & Caps series are designed for High-Performance Liquid Chromatography (HPLC) and Gas Chromatography (GC) analyses. Made from high-quality borosilicate glass, they ensure sample stability and accurate analytical results.

The Chemical Oxygen Demand Tubes supplier region is the second-largest market for chemical oxygen generators.Aijiren is the leading supplier of Chemical Oxygen Demand Tubes from China.

Aijiren 18mm 10ml Screw Headspace Vials are high-quality borosilicate glass vials designed for headspace analysis of volatile solids and gases, featuring high temperature and high pressure resistance, and easy operation and storage of volatile samples.

Lab-grade syringe filters engineered for HPLC and MS analysis, available in Nylon, Hydrophilic PVDF, PTFE, and more. Features low extractables and ISO-certified biocompatibility for sample integrity and instrument protection.

Materials of construction: pp chamber, PP plunger outer housing, borosilicate glass plunger inner storage vial, silicone septa with PTFE liner, PP cap
Vial Size: 12 x 32 mm
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL
Maximum operating temperature: 122°F (50°C)
Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample

11mm crimp top autosampler vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted

Aijiren™ reagent bottles, also called media bottles, are manufactured from high quality, borosilicate 3.3 glass, with GL45 thread cap. With their superior chemical resistance, these bottles are ideal for storage of reagents, culture media, biological fluids and a variety of other aqueous and non-aqueous solutions. Clear bottles are ideal for displaying items, Sizes range from 100 ml up to 1000 ml and the larger ones may be used to store preserved biological specimens in the lab. The large ones also make excellent terrariums or miniature aquariums.

All of Aijiren vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, some vial bottoms are designed with round bottoms, so that it has a flat bottoming function and compatibility with automatic sampling equipment.

Screw neck 2ml HPLC Autosampler Vial is designed for high performance liquid chromatography (HPLC) autosampler systems. It is characterized by ease of use and excellent compatibility and is often referred to as an autosampler vial. With an 8mm outer diameter and 425 thread style, it is available in clear and amber. They are made of borosilicate glass type I material, with a use volume of 1.5ml and a maximum capacity of 2ml

20mm crimp headspace vial is widely used in Headspace and GC, GCMS application.

13mm diameter syringe filter:
Filter Ø: 13 mm
Filtration area: 1.09 mm2
Housing material: polypropylene
Holdup volume: <20 µl Sample volume: <10 ml Maximum Operating Temperature: 130°C (Housing only, also dependent on membrane) Maximum Operating Pressure: 87 psi (Housing only, also dependent on the membrane) Inlet: Luer locks female Outlet: Luer slipped male

9mm screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Aijiren COD Test Tube is made of borosilicate glass, which can reduce pH changes and pollutants that may be leached from soda lime glass. The glass digestion test tube can be used for analysis at temperatures higher than 130 degrees Celsius. It is manufactured from laboratory storage for a variety of general purposes and can hold almost anything. The gasket is made of a PTFE silicon rubber gasket, which has strong sealing performance and can resist various chemical corrosion. The  COD Test Tube is small in size and light in weight. It can be tested without any other laboratory equipment and technicians; it only takes 3-5 minutes to test a sample, without additional materials or instruments and is easy to operate.

Size: 22.5*75mm
Volume: 20 mL
Size: 22.5 x 75 mm
I.D.: 20 mm
20mL Screw Top Headspace Vial + 18mm Magnetic Screw Cap Magnetic with Pre-fitted Silicone/PTFE Liner.

All of Aijiren vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, some vial bottoms are designed with round bottoms, so that it has a flat bottoming function and compatibility with automatic sampling equipment.

Aijiren’s handheld crimping machine provides a consistent and reliable seal, ensuring that the vial is securely sealed every time. The high-quality structure has been carefully designed, has durability and long life, and can provide smooth and simple operation. Manually adjustable stop, comfortable to hold the cushion, economical and durable.

Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

Aijiren™ reagent bottles, also called media bottles, are manufactured from high quality, borosilicate 3.3 glass, with GL45 thread cap.

1000M Glass Reagent Bottles fit for storing chemicals, liquids, powders, biologicals, and other liquid solutions for lab.
Autoclavable: Max 120℃ for bottles
Manufacturer: ‎Aijiren
Shape: ‎Round
Material: Glass
Feature:
140℃ for caps when autoclaving;
durable, reusable, environmentally friendly.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials are developed from Europe and the United States, and the design feature is easy to use, especially the use of automated sample introduction system. Aijiren screw thread top vials also known as autosampler bottles.

HPLC Syringe Filters are essential tools for chromatography and lab sample preparation. They precisely remove particulates to protect columns and prevent clogging, while low‑leach housings preserve sample purity. Available membrane materials include Nylon, PVDF, PTFE, PES, MCE, PP, and Cellulose Acetate—suiting pharmaceutical, environmental, biotech, and food‑testing workflows.

These 10 mL crimp‑top headspace vials (22.5 × 46 mm) are crafted from Type I borosilicate glass and available in flat‑bottom and round‑bottom styles, making them ideal for gas chromatography headspace analysis. Their 20 mm crimp seals accommodate standard butyl septa and aluminum caps, ensuring leak‑proof, uniform heating, and reproducible volatile compound sampling. Widely compatible with major headspace autosampler platforms and in circulation since 2021, these vials support environmental, pharmaceutical, and food‑safety laboratories worldwide

✅ 1.5mL Short Thread Vial (ND9) – 9mm thread, amber/clear glass | $2.53/package
✅ 1.5mL Screw Neck Vial (ND8) – 8-425 thread, black/white cap | Compatible with autosampler
✅ 1.5mL Screw Neck Vial (ND10) – 10-425 thread | Polypropylene cap + PTFE septum
✅ 1.5mL Snap Neck Vial (ND11) – Wide mouth design, easy to fill
✅ 4mL Screw Neck Vial (ND13) – Preferred for compound storage
✅ 1mL Shell Vial-PE inner plug, specially for microscale experiments

As such there may be multiple types of vials being used simultaneously in a single laboratory without much consideration as to which is best suited for analytical method development and validation.
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available

Aijiren™ reagent bottles, also called media bottles, are manufactured from high-quality, borosilicate 3.3 glass, with GL45 thread cap. With their superior chemical resistance, these bottles are ideal for storage of reagents, culture media, biological fluids, and a variety of other aqueous and non-aqueous solutions. Clear bottles are ideal for displaying items, Sizes range from 100 ml up to 1000 ml and the larger ones may be used to store preserved biological specimens in the lab. The large ones also make excellent terrariums or miniature aquariums. 

Designed for precision labs, 24-400 screw neck vials meet EPA and TOC analysis standards, available in 20mL to 60mL volumes for trace contaminant detection and long-term sample storage.

Chromatographic techniques play a pivotal role in organic compound analysis. This article delves into the principles, applications, and significance of GC, GC-MS, HPLC, and TOC in detecting organic compounds, offering insights to enhance analytical workflows and decision-making.

The round bottom of the Amber Reagent Bottle is slightly recessed inward, which is more convenient for stable placement on the desktop, and the reagents can smoothly enter the autosampler from the reagent bottle.

These 2ml Screw Top Plastic Autosampler Vials are made to consistent quality standards and are an excellent choice for ion Chromatography, CE, Bio-analysis, or General Chromatography when organic solvents are not needed. Minimized ionic interactions and adsorption with vial walls provide consistent results for proteins and peptides. 2ml screw top plastic autosampler vials are made of high-quality GC-tested polypropylene material. Polypropylene vials are chemically inert and suitable for most chromatography experiments, the material of choice for pH-sensitive samples, and sodium or heavy metal analyses. Plastic bottles may be used over traditional glass bottles when the content of inorganic ions must be kept to an absolute minimum.

Aijiren™ reagent bottles, also called media bottles, are manufactured from high quality, borosilicate 3.3 glass.

Flat bottom glass inserts have the largest capacity and are the most economical inserts. These inserts are cylindrical in shape with a flat bottom.Aijiren is the leading supplier of Flat bottom glass inserts since 2007.

Item: Aluminum Cap with PTFE septa
Screw Thread Type
Application: For 18mm Headspace Vials
Brand: Aijiren
Certification: ISO9001:2022
Place of Origin: China (Mainland)
Sample: Free
Payment: 100% T/T in advance

HPLC / GC autosampler vials, caps, septa, and inserts working as a whole to prevent sample degradation and loss of samples caused by evaporation. All components of 2ml autosampler vials from AirekaCells® are designed manufactured by the same level of product standard.

Constructed from glass, borosilicate glass or soda-lime glass, reagent bottles feature stoppers or caps, which protect the contents from spilling or outside environmental contamination. Reagent bottles are excellent for storing powders and liquids. Reagent bottles are available with narrow mouths for better control while pouring, or wide mouths for easy filling or content retrieval. Aijiren produce all the reagent bottle and caps in Class 100000 Cleanroom.

OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Vial Height(mm): 32±0.3
Mouth Diameter(mm):6.15±0.15
Quantity: 100 vials & 100 caps

The 8-425 vial has an outer diameter of 8mm, which is a common size for HPLC autosampler systems. This standard size ensures compatibility with a wide range of autosamplers and other accessories. These vials are typically made from high-quality, Borosilicate Glass or 1st hydrolytic-class glass to prevent interactions between the sample and the container. Aijiren screw thread top sample vial design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Aijiren 250ml Clear Reagent Bottle has also received FDA and ISO9001 certification, which is reportedly the incidence of the FDA taking an active interest in reagent bottle material.Aijiren is the leading supplier of 250ml Clear Reagent Bottle since 2007, is a reliable supplier of lab consumables.

2ml Amber HPLC vials are manufactured from Type 1 borosilicate glass, available in clear or amber, or from Polypropylene. Excellent for long-term storage. Deactivation and MS Certification are also available.
Size: 12*32mm
Application: For Autosampler
OEM: Available
Certificate: ISO9001:2021
MOQ: 1Packs

Aijiren 2ml snap neck has 40% lager target area which makes it much safer for the autosampler needle. Snap vials can be closed with either snap caps or crimp caps. Snap cap vials cannot be pressurized, but can be easy as push-on, pull-off by hand. A audible click ensures a secure seal has been formed and that the cap is correctly aligned. Precision-formed neck improves autosampler handling.

The Chemical Oxygen Demand Tubes supplier region is the second-largest market for chemical oxygen generators.Aijiren is the leading supplier of Chemical Oxygen Demand Tubes from China.

The main application for HPLC, autosampler, chromatography, Agilent, waters machine. All autosamplers of Ajiren Tech are 100% integrity tested and manufactured according to ISO 9001 standard. If a 2ml screw HPLC vialsis required. Please contact Ajiren.

This 500ml media bottle come with an autoclavable screw cap and pouring ring*. Screw Cap is made from polypropylene with large ridges for perfect grip. All these bottles autoclavable and are printed in white enamel.

Capacity: 250 mL/8.5 oz
permanent white enamel graduations from 50 mL to 200 mL
accurate scales, easy labeling
Dimension: OD: 2.56″, Neck ID: 1.18″, Height: 5.5″
GL45 Screw Cap

The 9mm screw vials are made of transparent Type 1 Class A or amber Type 1 Class B borosate glass. The 9mm screw vials are forged at high temperatures from borosilicate glass.

Aijiren COD Test Tube is made of borosilicate glass, which can reduce pH changes and pollutants that may be leached from soda lime glass.  The glass digestion test tube can be used for analysis at temperatures higher than 130 degrees Celsius.  It is manufactured from laboratory storage for a variety of general purposes and can hold almost anything. The COD Test Tube is small in size and light in weight. It can be tested without any other laboratory equipment and technicians; it only takes 3-5 minutes to test a sample, without additional materials or instruments and is easy to operate. These test tubes are SGC certified. These tubes can only be used once, so they cannot be reused. With the Aijiren COD tube test, each user can easily perform highly sensitive and accurate water detection.

2ml chromatography vials for HPLC. Aijiren’s 2ml chromatography vials have customized services such as the color of the pp cap, whether the vial has tick marks and label areas, and whether the customer’s brand logo is printed.

Laboratory 15mm Black Screw PP Cap ,9mm Center Hole,Closed-Top with PTFE Silicone Septa for 15-425 vials.Screw thread cap & septa that’s ideal for general laboratory use and storage of samples.

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance. A headspace vial is used in the process of top–gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial. The material of Headspace Vials is low extractable Borosilicate glass with a low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance, and high chemical stability. Headspace Vials are suitable for headspace analysis of volatile solids and gases.

Item: 250uL Micro Insert for 9mm HPLC Vials
Volume: 0.25ml
Color: Transparent
OEM: Available
Sample: Free
Certification: ISO9001:2015
Place of Origin: China (Mainland)
Compatibility: 2ml HPLC Vials
Polyspring inserts are self-aligning and provide a cushion against needle contact

PTFE/Silicone cap septa
Quantity 100 per unit
Formerly TOC-40-100
1.ND24 EPA Screw Neck Vials(Clear/Amber).
2. Available with black or white screw caps with 24mm thread.
3. Available as closed top screw seals or with a center hole.
4. Nature PTFE/nature Silicone septa 22*3mm
5. Environmental analysis
Disposable: Disposable

In HPLC analysis, the particle size of the chromatographic column packing is small and it is easy to be blocked by impurity particles. Therefore, samples and solvents need to be filtered in advance to remove particulate contaminants and protect the instrument. Ion chromatography, which is commonly used in environmental analysis, also requires that no inorganic pollutants be introduced in sample pretreatment. Syringe filters can be used in HPLC analysis and IC analysis to filter sample solutions, which is an important step in the sample pretreatment process.

Micro vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

9mm 2ml Wide Opening Screw Vials. 9mm screw thread caps, septa, and vials are designed especially for use with Agilent’s and other rotating or robotic arm samplers 2ml, 12X32mm vials are manufactured of Clear. type 1 Class A or Amber, Type 1 Class B borosilicate glass and include a write-in patch for sample identification.

Finding suitability to be used over a wide temperature range, these 1ml Shell vials come extensively tested so as to perfectly match up with the end user demands. Undergoing lab tests for ensuring defined quality standards. original shell vial for Waters 96-position autosampler. manufactured from superior quality borosilicate glass. 0.15 or 0.20 mL limited volume insert

Individually packaged, 100pcs per pack, 40PK/carton.56*50*26cm.

20ml headspace vials, septum, and caps can be purchased in various quantities separately or together as convenience kits to fit your laboratory needs.

GL45 Screw Cap: Blue GL45 screw cap, tight seal, drip-free pouring ring, airtight seal, no leaking
Autoclavable: Max 120℃ for bottles, 140℃ for caps when autoclaving, durable, reusable, environmentally friendly
Glass bottles are fit for storing chemicals, liquids, powders, biologicals and other liquid solutions for lab, experiment, chemistry, scientific studies and household home uses.

The choice of autosampler vials may seem much less important compared to the significance chromatography instruments many laboratories use. However, the wrong choices of HPLC or GC vials, caps, septas and inserts might well lead to lower experiment productivity and reproducibility or even mechanical damage to the autosampler.

8mm Vials (volume 2 mL, amber glass vial, thread 8-425) are suitable basically to inject samples from an autosampler.
Suitable for Agilent, AB Sciex, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers.
Amber vial, 51 Expansion borosilicate glass USP Type I, Class B
Polypropylene Screw Cap with Septa

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

EPA vials meet U.S. Environmental Protection Agency (EPA) requirements for testing water or soil samples for potentially harmful environmental contaminants.
If used for environmental analysis, EPA vials must be clean and free of substances that may affect the analysis. Glass vials that meet these requirements are called EPA vials, sometimes also called VOA (Volatile Organic Analysis) vials. EPA Vials are made of chemically inert Type I borosilicate glass in clear or amber colors.

The 1.5mL 9mm Short Thread Vial ND9,with its 9mm short thread design and capacity of 1.5-2.0mL, this vial makes for easy handling and integration into autosamplers. Ideal for applications requiring limited quantities. The vial comes equipped with various finishes and closure options, such as screw caps and snap caps, so researchers can select their ideal choice according to their unique research needs.

COD testing is a good better indicator of organic pollutants in industrial wastewater containing cyanides and heavy metals. For any requirements about COD Tubes, please tell me.
Product name: COD Tubes without Logo
Size: 16*100mm
Application: Water analysis
Material: Borosilicate 3.3 Glass
Melting point: -7℃
Certificate: ISO9001

1) GC Plug for Shimadzu GCs, Thermolite Color,Φ5.5*7*7 .5mm, Temperature Resistant 340° C
2) GC Septa, Green Color,Φ11*3mm, Temperature Resistant 250° C

Aijiren HPLC, GC, and autosampler vial and 9mm blue screw caps products are manufactured to provide high-quality, state-of-the-art solutions for your most challenging, sensitive applications.
Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

Aijiren Standard Opening 12×32 Vials:8-425 screw-thread vials are the original, standard opening vials, Vials are manufactured of Clear, Type I Class A or Amber, Type I Class B borosilicate glass, Vials have a standard graduated write-on patch for easy filling and identification of sample.
Buying Aijiren’s 8mm hplc vial requires an 8-425 cap and 8mm septum.
Aijiren’s Caps are all made of high-quality polypropylene. You can choose whether to have a center hole cap or not. Septa uses a double-sided combination of PTFE and Silicone. The assembled cap and septum are very convenient for customers to use.

Graduated write-on marking spot area for easy filling and identification of sample, measures 0.5, 1.0 and 1.5ml. Amber glass vials are perfect for storing samples that are sensitive to light exposure. Clear glass vials are great for testing the solubility or dispersibility of materials, allowing you an unhindered view of the solution. These 9mm 2ml Short Tread Glass HPLC Vials are typically made from high-quality Borosilicate Glass or 1st hydrolytic-class glass. The choice of material is essential to prevent any chemical interactions between the sample and the vial, ensuring data accuracy.

9mm screw thread vials are designed especially for use with Agilent’s and other rotating or robotic arm samplers 2ml, 12X32mm vials are manufactured of borosilicate glass and include a write-in patch for sample identification.

All Clear Reagent Bottle of Aijiren Tech are 100% integrity tested and manufactured in accordance with ISO 9001 standards. If you have any requirements for Clear Reagent Bottle. Please contact Aijiren.

Unique raised column structure with 0.45μm PES membrane processes double sample volume vs conventional filters, extending service life.

The Aijiren GL45 500ml media bottle are designed and manufactured in China. Made of premium Borosilicate glass, these GL45 500ml media bottle offer maximum possible chemical resistance with minimal thermal expansion, making them the best choice for laboratory applications.

• 32 X 12 mm, 2ml, screw neck
• The Mcirolab’s 10-425 Wide opening enables easy filling with viscous materials.
• Reduce the chances of bent or broken needles during sampling.
• Broad range of Micro-Inserts .
• Packed in a Cleanroom class 100,000.
The vials are preferentially used on instruments of the following manufacturers: Jasco, Perkin Elmer, Shimadzu, Varian, Waters®, etc.
• Clear glass vials–made from USP Type I, Class A, 33 Borosilicate Expansion glass
• Amber glass vials—made from USP Type 1 Class B, 51 Borosilicate Glass.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

11mm crimp top vials are designed to provide superior performance in limited volume applications where recovery of the vial contents is the main consideration. These vials are designed to be used with 11mm aluminum crimp top seals.

Polypropylene is chemically resistant and the material of choice for pH sensitive samples, sodium or heavy metal analyses.
The PP vials are ideal when working with pH sensitive samples, aqueous samples in pharmaceutical applications, or undertaking sodium analysis.
If you’re analyzing anything that might adsorb into borosilicate glass, or looking to avoid sodium adducts pulled out of glass, these vials seem to do the trick. Using them on triple quad mass spec quite successfully.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.
Aijiren 10mm 2ml hplc autosampler vial is generally made of the high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert. the wide mouth of 10-425 vials can get a larger injection range, so this kind of bottle is often used to repeatedly clean the residual solution on the automatic injection needle.