9mm 0.3ml Glass Micro vial Integrated with Insert

In chromatography analysis field, 8mm short screw vials is widely used in Life science and technology, Environmental Protection, Food safety. 2ml Autosampler Vials 8-425 neck finish represents a hplc vials &gc vials, the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm.

250µL Flat Bottom Glass Inserts for Chromatography Vials. These Flat Bottom Glass Inserts are designed to be used in 2mL standard opening crimp top and screw thread vials. They represent an economical alternative to the conical limited-volume inserts. Clear Glass Micro Insert is used to ensure the most accurate and reliable analysis of your lab samples. Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal. The 250µL Glass Flat Bottom Inserts make an excellent choice to daily chromatographic experiments in the lab combining the highest quality and consistent results with low cost. A must-have for your research.

2ml amber autosampler vial, 12mm Diameter, 32mm Height, 9-425 screw top. Our vials with caps are widely used in standard HPLC and GC applications. The vials can be used on all common autosamplers due to their technical geometry, preferentially they are found on Agilent, HTA, Shimadzu, Thermo, Varian, Waters, etc.

All of Aijiren vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, some vial bottoms are designed with round bottoms, so that it has a flat bottoming function and compatibility with automatic sampling equipment.

10ml headspace vial with aluminum crimp cap and Magnetic bimetal cover is designed for Gas Chromatography.
this 10ml GC vial is Flat bottom, which size is 22.5x46mm. As you saw in the pic, there are two different cap and septa to selection. Aluminum cap and Magnetic bimetal cover. Please choose the 10ml glass GC vial as your gas chromatography instrument requirement.

Preassembled polypropylene snap-top closures with a 6mm center hole, including  PTFE/silicone septa. To use with 11mm snap-top vials. Snap caps provide a secure seal, minimizing evaporation even with volatile samples. Snap ring closures N11 should only be used in HPLC, as the punctual compacting pressure of the septum against the vial rim by the four pins in the cap does not achieve the same level of tightness as the evenly applied pressure through a screw thread or by crimping.

2ml Clear Screw HPLC Vials and closures are universally suitable on most autosamplers, convenient in handling, and available in a broad selection of different cap colors and septum materials.

Our screw-top 2ml HPLC vials and screw caps are the perfect fit for HPLC and GC instrument platforms across a wide variety of applications, including pharmaceutical, environmental, energy and fuels, forensics, materials science, biopharmaceutical, proteomics, and metabolomics.
Vial Volume: 1.5-2.0ml
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Application: Lab consumables for analysis

There are glass vials and plastic vials to choose from, and different materials can be selected for different scenes.

Micro vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

The classification of HPLC autosampler vials is generally done based on the diameter of the vial body, vial height, and thread finish.Our 2ml Screw HPLC Vials are the perfect fit for HPLC and GC instrument platforms across a wide variety of applications.

The Aijiren sample vial has excellent sealing performance, which can effectively avoid sample evaporation. The vial and the corresponding 11 mm aluminum cap can be easily and quickly combined with the jaw capping tool. The vial can withstand heat and pressure, and can also be used for chemical reactions. Especially for vials with white open caps and thick PTFE / silicone septa, they can be used as anhydrous and oxygen-free reaction vials.

Browse 2ml 10mm autosampler vials and vial inserts in various sizes and closures with and without septa, including snap, screw, or crimp top vial closure options.Aijiren is the leading supplier of 2ml 10mm autosampler vials since 2007.
Vial Dimension: 11.6*32mm
Vial Volume: 1.5-2.0ml
Vial Thread: Screw
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis

The 9mm Short Thread Caps that are included with this kit are knurled on the sides for excellent gripping and comfort when applying to the vial. Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage.Screw Cap Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap.

Standard Autosampler Vial for HPLC & GC Chromatography, vials can be used for high-performance liquid chromatography and gas chromatography for reliable analysis results
Material: Glass
Color: Clear
Height (Metric): 32mm
Outside Diameter (Metric): 12mm
Patched: No
Residual Volume: <170uL Quantity: 100Pieces/Pack

These septa are designed to work on most HPLC screw vials. Screw HPLC Vials offer the convenience of screw thread vials for vials that were originally designed for screw-top vials. They are available in both clear and amber glass.

Item: 250uL Micro Insert for 9mm HPLC Vials
Volume: 0.25ml
Color: Transparent
OEM: Available
Sample: Free
Certification: ISO9001:2015
Place of Origin: China (Mainland)
Compatibility: 2ml HPLC Vials
Polyspring inserts are self-aligning and provide a cushion against needle contact

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples. High recovery vials offer precision vials made from low expansion borosilicate glass and are designed with a unique interior bottom, solid glass bottom of a Microliter-Vial with an inner cone, allowing for maximum retrieval of contents by a syringe. High Recovery Vials Reduce Residual Product Waste by 99%. high recovery vials are optimal for manual and automated compound or biological sample applications.

15x45mm 4mL vials are widely used in compound storage as well as for chromatography sample vials.4mL vials are compatible with 13-425 screw thread closures，is for cleaning the needles during automatic sampling.13-425 screw thread caps, septa, and vials are designed for specific use with the Shimadzu and Waters WISP 48-Position Autosampler.4mL vials are widely used in compound storage as well as for chromatography sample vials.

Flat bottom glass inserts have the largest capacity and are the most economical inserts. These inserts are cylindrical in shape with a flat bottom.Aijiren is the leading supplier of Flat bottom glass inserts since 2007.

Aijiren screw thread top 8-425 sample vials design is characterized by the use of automated sample introduction systems, also called a autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. Standard vials are widely used for GC and HPLC.

The 8-425 vial has an outer diameter of 8mm, which is a common size for HPLC autosampler systems. This standard size ensures compatibility with a wide range of autosamplers and other accessories. These vials are typically made from high-quality, Borosilicate Glass or 1st hydrolytic-class glass to prevent interactions between the sample and the container. Aijiren screw thread top sample vial design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; to ensure excellent functions, it is particularly suitable for gas chromatography, and to ensure that the septum does not fall into the sample vial during the injection process.
The adhesive-free bonding process is used to combine the polytetrafluoroethylene membrane and the silicon rubber or silicone bond together to maintain the excellent characteristics of the two materials. The polytetrafluoroethylene layer of the composite septum is in contact with the reagent. It is chemically inert and resistant to acid, alkali, temperature, and adhesion. It does not work with concentrated acid, concentrated alkali, or strong oxidants even at high temperatures. At the same time, the elasticity of silicone rubber or silicone layer can ensure sealing performance.

8-425 screw top, 2ml Amber vial, graduated with writing area, standard opening vial
Caps are black screw PP cap,with 5.5mm centre Hole
Septum is made of High quality PTFE/silicone to ensure proper functioning

This type of glass has a borosilicate structure. It is ideal for containing all injectable preparations with acid, neutral and alkaline pH. It also has good resistance to thermal shocks and can be sterilized before or after filling.
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap

Amber 9mm HPLC Vials with Insert are universally suitable on most autosamplers, convenient in handling, and available in a broad selection of different cap colors and septum materials.

9mm Screw conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm. High-quality glass vial for HPLC/GC analysis. 2ml clear glass vial with 0.3ml integrated vial, designed for valuable samples to save for testing use volume. Bottom fixed micro insert to keep the vial central vertical. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass make it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges. Standard vials for GC and HPLC.

Crimp caps squeeze the membrane between the edge of the glass bottle and the crimped aluminum cap. This creates a good seal and prevents evaporation. Crimp cap vials require a hand crimper tool to perform the sealing process.

Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Payment: 100% T/T in advance

The size of ND11 snap top autosampler vial is 11.6x32mm, which is made of borosilicate glass. this snap top sample vial is mainly used in liquid chromatography analysis. The most important, this liquid chromatography vial is compatible with Agilent, Shimadzu, Waters, Varian, Thermo fisher and other brand autosampler instrument. All of sample vial is on stock, you can get the HPLC vial in 7-10 days after you order. Welcome to inquiry.

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples. High recovery vials offer precision vials made from low expansion borosilicate glass and are designed with a unique interior bottom, solid glass bottom of a Microliter-Vial with an inner cone, allowing for maximum retrieval of contents by a syringe. High Recovery Vials Reduce Residual Product Waste by 99%. high recovery vials are optimal for manual and automated compound or biological sample applications.

Screw top vials are one of several vial types used in autosamplers for automated sample injection into HPLC, GC, and MS analytical instruments.9-425 screw-top vial is 40% larger opening than standard narrow opening vials.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

Zhejiang Aijiren Technology, Inc. is a global supplier of life-science, chemistry, laboratory consumables, etc. Our major products are high performance liquid chromatography & gas chromatography consumables such as Chromatography Autosampler Vials with closures, inserts, crimper and syringe filters, etc; Water analysis consumables such as COD test tube.

9mm Screw conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm.

8-425 Screw Cap  are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly. The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial.

0.3 ml clear glass micro insert fixed in 2ml glass vial, designed for valuable samples to save for testing use volume

The 2ml 10mm clear HPLC vials can be suitably employed to inject samples from an autosampler. They come in a variety of sizes, 2ml 10mm clear HPLC vials being ubiquitously used.
Vial Volume: 1.5-2.0ml
Clear: Amber and Clear
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

Browse 2ml 10mm autosampler vials and vial inserts in various sizes and closures with and without septa, including snap, screw, or crimp top vial closure options.Aijiren is the leading supplier of 2ml 10mm autosampler vials since 2007.
Vial Dimension: 11.6*32mm
Vial Volume: 1.5-2.0ml
Vial Thread: Screw
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis

Aijiren Vials manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B, borosilicate glass
Aijiren Vials have a standard graduated write-on patch for easy filling and identification
Snap caps used with the Aijiren Vial system are a convenient alternative to aluminum seals
Snap caps or aluminum seals ensure a secure seal for samples

Screw-top Vials and caps are easy to use and require no special tools. The unique thread design provides a consistently secure seal, preventing evaporation. Screw Thread Vials are available in 8-425 (8mm), 9-425 (9mm), 10-425 (10mm) 1.5ml vials and 13-425 (13mm) 4ml vials.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted

Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

Conical glass inserts have a tapered bottom with pulled tips and are available with or without plastics polypropylene springs. The spring acts as a shock absorber during needle penetration and raises the insert above the bottom of the vial, allowing greater sample recovery.

These septa are designed to work on most HPLC screw vials. Screw HPLC Vials offer the convenience of screw thread vials for vials that were originally designed for screw-top vials. They are available in both clear and amber glass.

The 2ml HPLC vials with a writing area and ticking are effective solutions because sample information can be read quickly, improving efficiency and workflow security.The 2 ml glass vial is made of borosate glass and can withstand high temperatures and is not easy to react with samples.

Glass autosampler vial, 4ml, 15mm x 45mm, used with 13-425 screw caps.
1.Ideal for general laboratory use and sample storage.
2.Chemically inert caps suitable for most chromatography and storage applications
3.Top grade PTFE/silicone septa used for cleanliness

HPLC Vials 10-425 1.5ml Screw Vials. Wide-opening vials provide an increased target area for easier sample preparation and to reduce the chance of bent or broken needles during sampling. Vials are manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B borosilicate glass . Requires the use of 10-425 screw thread closures and 10mm septa.

11mm Wide Opening Crimp Top Autosampler Vials are made of clear Type 1, Class A Borosilicate Glass with a writable label for sample identification.
Product Size: Pack of 100
Type: Target LoVial Clear Glass Vial
Vial Closure Size: 11mm
Vial Volume (Metric): 2mL
Description: Target LoVial, 2mL Clear Glass Vial
Item Description: 11mm Crimp Top Vial, Wide Opening
Volume (Metric) Working: 1.8mL

Micro Insert is used to ensure the most accurate and reliable analysis of your lab samples. Micro-inserts are manufactured of clear glass. Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal because the conical shape decreases the surface area inside the vial.
Micro inserts can be used with screw tops, crimp tops, or snap-top vials. All conical styles of inserts are offered with the traditional pulled point as well as the improved mandrel point. Pulled point inserts are more economical, but mandrel point inserts provide a more pointed and uniform tip that enables better sample recovery. Micro-inserts can be used on all 1.5ml vials. Effectively relieves the pressure of the syringe. PolySpring inserts are self-aligning.

 1.5mL Clear Screw Neck vial,8-425 Thread,11.6*32mm application in liquid chromatography, Gas chromatography, and Mass spectrometry. Aijiren screw thread top sample vial design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

Maximum operating temperature: 122°F (50°C)
Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample
Vial Size: 12 x 32 mm
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL
Maximum operating temperature: 122°F (50°C)

Use Performance 20 mL Glass Crimp Top Vials for everyday chromatography analysis. They provide an affordable choice and can be used with all headspace GC instrument types.

The opening of the 8mm hplc vial is 5.5 mm. These vials are designed for most autosamplers that use 12mm x 32mm crimp vials. They provide the convenience of threaded vials for instruments that were originally designed to crimp top vials. They are available in clear glass and amber glass8-425 screw top 2ml vials

All of Aijiren vials are excellently fitted for autosamplers and have good chemical compatibility and super cleanliness. The crimp top sample vial is the most commonly used gas sampling vial on the market at present. 2ml volume sample vial especially suitable for laboratory use. At the same time, some vial bottoms are designed with round bottoms, so that it has a flat bottoming function and compatibility with automatic sampling equipment.

The 11mm crimp top chromatography vials is generally broken down into low boron and chromium, but the difference is that the content of boric acid and the physical and chemical properties of the glass are also different. Aijiren offers 11mm crimp top chromatography vials in the boric acid glass.

250µL Flat Bottom Glass Inserts for Chromatography Vials. These Flat Bottom Glass Inserts are designed to be used in 2mL standard opening crimp top and screw thread vials. They represent an economical alternative to the conical limited-volume inserts. Clear Glass Micro Insert is used to ensure the most accurate and reliable analysis of your lab samples. Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal. The 250µL Glass Flat Bottom Inserts make an excellent choice to daily chromatographic experiments in the lab combining the highest quality and consistent results with low cost. A must-have for your research.

11mm Crimp Top Autosampler Vial for GC and HPLC. Vials have a 40% larger opening than standard opening aluminum seal vials, manufactured of Clear or Amber borosilicate glass. The standard 12x32mm profile is compatible with 11mm aluminum seal closures. The precision-shaped bottleneck can improve the processing capacity of the autosampler. In order to ensure good function, it can be slit in advance to facilitate needle penetration, designed for single injection or short sampling cycle, and especially suitable for liquid chromatography. 

Item:2ml hplc vials and 4ml washing vials supplier
Color: Clear or Amber
Brand: Aijiren Tech
Capacity Recommend: 1.5ml Standard
Payment: 100% T/T in advance
Certificate: ISO9001:2015

As such there may be multiple types of vials being used simultaneously in a single laboratory without much consideration as to which is best suited for analytical method development and validation.
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available

Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

Aijiren 11mm polypropylene snap micro vials can be used in most standard gas and liquid chromatography autosamplers. Universally usable vials for almost all autosamplers, even those with robotic handling. Vials can also be crimped with a standard 11mm Aluminum Crimp Seal. The conical interior ensures maximum retrieval of contents without the hassle of using removable inserts. Plastic bottle with thinner penetration point, made of polyethylene, suitable for snap ring bottles and crimp top bottles ND11. Snap/Crimp Top Compatible with caps for use with 11mm PP Micro-Vial Snap Ring/Crimp.

9mm Screw conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm.
High quality glass vial for HPLC/GC analysis. 0.3 ml clear glass micro insert fixed in 2ml glass vial. Conical base insert vial can saving samples while during injection. wide opening top for better needle injection. 2ml clear glass vial with 0.3ml intergrated vial, designed for valuable samples to save for testing use volum. Bottom fixed micro insert to keep the vial central vertical

The 2ml HPLC Screw Vials are made from clear/ amber, Type I borosilicate and 33 expansion glass.2ml Amber HPLC Screw Vials with unique thread design ensures consistent seal and can be reused, not volatile, easy to use, Reduce the chances of bent or broken needles during sampling.

Material is Brosilicate Glass/1st hydrolytic class glass. 100pcs packed in one box. Available in clear and amber.

Micro vials are specially designed to collect micro-volume samples and minimize evaporation.
Two sizes are available
Tapered for high recovery of contents.
Work with Mininert sampling valves.

Micro inserts, when used in conjunction with autosampler vials, allow for maximum sample recovery and easier sample removal because the conical shape decreases the surface area inside the vial.

1.Micro-volume “Drop-In” Inserts for use with Standard 9-425 (9mm) Mouth HPLC Vials.
2.Compatible with all 2ml Screw HPLC Vials, 9mm Thread
3.Center automatically with a flat bottom and mandrel interior
4.Type I borosilicate glass

Snap cap vials have a standard 12×32 profile compatible with 11mm snap caps or 11mm crimp closures, Microsampling vials allow for max sample extraction without separate inserts. Manufactured from clear, Type 1 Class A or amber, Type 1 Class B borosilicate glass.

Materials of construction: pp chamber, PP plunger outer housing, borosilicate glass plunger inner storage vial, silicone septa with PTFE liner, PP cap
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL
Maximum operating temperature: 122°F (50°C)
Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample

1.5ml Glass High Recovery Vial,12 dia x 32 mm H, Clear or Amber, Solid Glass, Large Opening Style, High Recovery, 9 mm Neck Finish, One Piece Conical Design Allowing Complete Sample Recovery
High Recovery Vial to minimize adsorption of polar compounds, including amino acids, proteins, and phenols to the inner surface of the vial. High-recovery vials deliver high sample capacity with very low residual volume. Use total-recovery vials for maximum sample recovery. These high-quality 9mm clear glass vials are 2mL, 12x32mm, and fit most brands of autosamplers. Made of superior quality borosilicate clear, they meet all requirements of US, EU, JPN Pharmacopia

Standard Autosampler Vial for HPLC & GC Chromatography, vials can be used for high-performance liquid chromatography and gas chromatography for reliable analysis results
Material: Glass
Color: Clear
Height (Metric): 32mm
Outside Diameter (Metric): 12mm
Patched: No
Residual Volume: <170uL Quantity: 100Pieces/Pack

Aijiren 9mm vials may be used with robotic autosamplers in place of crimp style vials. 9mm Vials have a 40% larger opening for easier sample preparation, Aijiren 9mm vials must be used with 9mm screw pp closures to ensure proper fit and functionality.

Use Aijiren 11 mm Glass Crimp Top Vials with aluminum crimp seal closures. These high-quality 11 mm glass vials are 2 mL, 12 x 32 mm and fit most brands of autosamplers. Made of superior quality 33 expansion borosilicate clear (Type 1, Class A), they meet all requirements of US, EU, JPN Pharmacopia. Choose from Aijiren brands.

8-425 screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

4ml 13-425 screw neck vial, also called wash vial or waste vial, is for cleaning the needles during automatic sampling. Vials are manufactured of Clear, or Amber borosilicate glass and include a write-in patch for sample identification. Caps are made of high-quality polypropylene to exact manufacturing tolerances and lined in a controlled manufacturing environment. Cap colors are available in black only. Our septa use only the highest quality materials to ensure proper function and can be pre-slit to ease needle penetration.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Sample: Free
Payment: 100% T/T in advance
Certificate: ISO9001:2015

Aijiren offers proven autosampler vials and consumables for the chromatographer. The standard opening 2ml clear hplc vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.
Size:12*32mm
Classification: Laboratory Bottle
Application: For Autosampler
Material: Borosilicate Glass
Place of Origin: Zhejiang, China

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible.The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Polypropylene as a vial material is a good choice for protein analysis because normal borosilicate glass vials are known to absorb some types of analytes such as proteins, peptides, and amines.
Insert Volume: 0.3ml
Vial Thread: Screw
Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Usage: Laboratory Analysis
Packing: 100pcs/pk

Aijiren 10mm hplc vial is suitable for the following brands of instruments: Jasso, Shimadzu, Varian, VWR (Merck)/Hitachi, PerkinElmer, etc. 10mm is 40% larger than the opening of the general liquid/gas injection bottle, which is more conducive to multiple injections. The sample bottle with writing provides a graduated writing label for easy identification of the sample.

The 11mm snap-top caps are made of high-quality polypropylene. The caps have a roll-edge or snap-on shape. The snap-top caps provide a secure seal that minimizes evaporation even for volatile samples. PTFE/silicone septa are the product of choice for most HPLC and GC applications where resealability and high purity are critical. Ideal for applications where ease of needle insertion is important. Silicone septa have strong re-sealing properties and can still maintain good sealing performance after multiple injections; PTFE is currently a material with good chemical conditions and can withstand strong acids and alkalis. After the two materials are combined, the bottle can be used for various laboratory purposes such as sealed sampling and chemical storage.

These standard opening 2ml HPLC Vials with Caps have a narrow opening that can be used with a 9-425mm cap and a septum.So if you are interested in 2ml 9mm HPLC Vial, please contact us right NOW.

Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

Aijiren 2ml 10mm chromatography amber vials are constructed from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 2ml 10mm chromatography amber vials and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
Vial Dimension: 11.6*32mm
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

Usage: Laboratory Analysis
Logo: Customized Accepted
Trademark: Aijiren
Origin: China
OEM: Available
Sample: Provided Freely

HPLC / GC autosampler vials, caps, septa, and inserts working as a whole to prevent sample degradation and loss of samples caused by evaporation. All components of 2ml autosampler vials from AirekaCells® are designed manufactured by the same level of product standard.

10mm Screw Vials
• 32 X 12 mm, 2ml, screw neck
• The 10-425 Wide opening enables easy filling with viscous materials.
• Reduce the chances of bent or broken needles during sampling.
• Broad range of Micro-Inserts .
The vials are preferentially used on instruments of the following manufacturers: Jasco, Perkin Elmer, Shimadzu, Varian, Waters®, etc.

Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

Our 2ml Amber HPLC Screw Vials for autosampler are constructed from type 33 and type 51 COE borosilicate glass. By choosing our 2ml Amber HPLC Screw Vials with Caps, you provide your sample with the best containment solution available.

The 9mm Short Thread Caps that are included with this kit are knurled on the sides for excellent gripping and comfort when applying to the vial. Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage.Screw Cap Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap.

9mm screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Micro inserts Packing: Economy Package and General Package for choose. Neutral carton outside, pallet is available to protect quality better.
OEM packing is also available.

The 2ml chromatography vial is forged at high temperatures from borosilicate glass. The Aijiren Scientific 2ml chromatography vial Certified Vial Convenience Kit (Opening 9mm) is fully lot tested in multiple ways for 15 critical parameters.

Aijiren is the largest chromatography consumable manufacturer in south of China. There are HPLC vial, GC vial, Septum and closures, EPA vial, TOC vial, Test tube, Reagent bottle and Syringe filter in Aijiren shop. You can get all the consumables in wholesale price. Please choose your needed in precise catalog.