11mm crimp vials and 9mm screw vials for sale from China

2ml Clear Screw HPLC Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. 2ml Clear Screw HPLC Vial’caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly.

Our polypropylene vials and crimp caps are the perfect fit for HPLC and GC instrument platforms across a wide variety of applications. Polypropylene Caps are known for good impact strength, cost-effectiveness, and pliability.

Polypropylene is chemically resistant and the material of choice for pH sensitive samples, sodium or heavy metal analyses.
The PP vials are ideal when working with pH sensitive samples, aqueous samples in pharmaceutical applications, or undertaking sodium analysis.
If you’re analyzing anything that might adsorb into borosilicate glass, or looking to avoid sodium adducts pulled out of glass, these vials seem to do the trick. Using them on triple quad mass spec quite successfully.

Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted

Crimp Vials squeeze the septum between the rim of the glass vial and the crimped aluminum cap. This forms an excellent seal preventing evaporation. The septum stays seated during piercing by the autosampler needle. The crimp cap vial requires crimping tools to carry out the sealing process. For low volume settings, manual crimper tools are the choice. For high volume settings, automated crimpers are available.

These 20mm Crimp Top Aluminum Caps are typically made of aluminum, which is a lightweight and corrosion-resistant metal. Aluminum provides excellent sealing properties, ensuring the integrity of the sample within the vial. The cap features a crimp top design, which means it can be securely attached to the vial by using a crimping tool. This process involves crimping the cap around the vial’s neck, creating a tight and tamper-evident seal. 20mm Crimp Top Aluminum Caps often come in various colors, which can help with sample identification, organization, or differentiation of different products or solutions. The cap material is a metal aluminum cover. The design with a 9.5mm hole in the center of the cover can be used for headspace analysis. Standard GC and HPLC sample bottles can be used for autosampler and sample storage.

Crimp caps squeeze the membrane between the edge of the glass bottle and the crimped aluminum cap. This creates a good seal and prevents evaporation. Crimp cap vials require a hand crimper tool to perform the sealing process.

The Aijiren 2ml clear screw HPLC vials Certified Vial Convenience Kit (Opening 9mm) is full lot tested in multiple ways for 15 critical parameters. Aijiren’s 2ml clear screw hplc vials for autosampler is usually divided into three types of calibers.

Autosampler vials for HPLC are generally grouped depending on the diameter of the vial, the height of the vial, and, the thread finish. Both clear glass and amber glass are highly inert.
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Vial Height(mm): 32±0.3
Mouth Diameter(mm):6.15±0.15

Aijiren is the largest chromatography consumable manufacturer in south of China. There are HPLC vial, GC vial, Septum and closures, EPA vial, TOC vial, Test tube, Reagent bottle and Syringe filter in Aijiren shop. You can get all the consumables in wholesale price. Please choose your needed in precise catalog.

The 20mm 20ml Crimp Top Headspace vial has a 20mm outer diameter, which is the standard size for crimp-style headspace vials. The 20ml capacity refers to the volume of the vial, meaning it can hold up to 20 milliliters of liquid or gas sample. These vials are typically made from high-quality borosilicate glass. Borosilicate glass is chosen because it is resistant to chemical reactions and can withstand high temperatures, making it ideal for containing volatile samples without contamination. A headspace vial is used in the process of top – gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial.

9mm Short Thread Vial with integrated 0.3ml Micro-Insert, 32 x 11.6mm, Amber or clear glass, 1st hydrolytic class, label and filling lines, 100/pk
Aijiren 9mm glass vial with fused insert together eliminates movement of the insert. The fused insert also eliminates concerns about contaminants around the fused seam/space between the neck of the vial and the insert. Vials without graduation, all micro inserts are clear glass. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples.

Aijiren offers proven autosampler vials and consumables for the chromatographer. The standard opening 2ml clear hplc vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.
Size:12*32mm
Classification: Laboratory Bottle
Application: For Autosampler
Material: Borosilicate Glass
Place of Origin: Zhejiang, China

Fused-insert sample vials work with both snap caps and crimp caps. These small samples fused-insert vials work with both snap caps and crimp caps. 11mm Glass Crimp Neck Vials with Fused Inserts are ideal for handling small-volume samples while delivering low residual volume. 11mm Glass Crimp Neck Vials with Fused Inserts offers the simplicity and functionality of typical micro vials at a fraction of the cost. 0.3 ml clear glass micro insert fixed in 2 ml glass vial. Bottom fixed micro insert to keep the vial central vertical. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges.

China High Quality 9mm Short Thread Caps with Septa for 10-425 thread vial Manufacturer

Vial Dimension: 12x32mm
Vial Material: Borosilicate Glass/Glass Type 1
Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Pack:Vials:100 Pieces with Heat-shrinkable plastic box+Carton
Cap&Septa:100pieces/Bag+Carton

Materials of construction: pp chamber, PP plunger outer housing, borosilicate glass plunger inner storage vial, silicone septa with PTFE liner, PP cap
Vial Size: 12 x 32 mm
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL
Maximum operating temperature: 122°F (50°C)
Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample

Suitable for 9mm Short Thread Vials. Caps is made of polypropylene. Septa is made of PTFE / Silicone. Color can be customized. 6mm Centre Hole or Closed Top can be selected.

The vial has an outer diameter of 8mm, which is a common size for HPLC autosampler systems. This standard size ensures compatibility with a wide range of autosamplers and other accessories. These vials are typically made from high-quality, Borosilicate Glass or 1st hydrolytic-class glass to prevent interactions between the sample and the container. 2ml Autosampler Vials 8-425 neck finish represents HPLC vials &gc vials, the vials a diameter of 8 mm across the outside of the threads and a thread style of 425, Vials has clear and amber, Screw Cap in Lab most of the 2ml vials are 12*32mm. Aijiren screw thread top sample vial design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Septa Material: PTFE/Silicone (White)
Usage: 20ml Headspace Vials
Production Capacity: 50000000PCS/Week
Specification: 100pcs/pack
Trademark:Aijiren
Origin: China

9mm screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Aijiren pp caps for 2ml 9-425 screw-top vials with caps lined with PTFE/Silicone septa are used in chromatography analysis, it can be used in HPLC/GC Application.
Size: 9mm
Cap Material: PP
Color: Blue or Customized
Application: For 2ml 9-425 Screw Top Vials
Matching Brands: Waters, Varian, Shimadzu etc

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples. High Recovery Vials Reduce Residual Product Waste by 99%.

Aijiren’s exclusive adhesive-free bonding process does not require the introduction of adhesives. The septum retains the excellent resilience properties of silicone rubber or silicone. It is softer than the septum of the bonding process and is convenient for the needle of the autosampler Better penetration.

Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

These 2ml clear chromatography vials include 100/PK of 2ml RSA-Pro™ surface-treated glass vials with 9mm screw threads. Any requirement about 2ml clear chromatography vials,please contact AIJIREN.
Volume: 2ml
Usage: Laboratory Analysis
Brand Name: AIJIREN
Printing with Company Logo: Accept

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples. High recovery vials offer precision vials made from low expansion borosilicate glass and are designed with a unique interior bottom, solid glass bottom of a Microliter-Vial with an inner cone, allowing for maximum retrieval of contents by a syringe. High Recovery Vials Reduce Residual Product Waste by 99%. high recovery vials are optimal for manual and automated compound or biological sample applications.

The vial for HPLC with insert is larger than the 9mm screw sample vial and has a wider mouth.2ml autosampler vials is a container designed to temporarily hold samples analyzed as part of gas (GC) or liquid (HPLC) chromatography.

Aijiren COD Test Tube is made of borosilicate glass, which can reduce pH changes and pollutants that may be leached from soda lime glass. The glass digestion test tube can be used for analysis at temperatures higher than 130 degrees Celsius. It is manufactured from laboratory storage for a variety of general purposes and can hold almost anything. The gasket is made of a PTFE silicon rubber gasket, which has strong sealing performance and can resist various chemical corrosion. The  COD Test Tube is small in size and light in weight. It can be tested without any other laboratory equipment and technicians; it only takes 3-5 minutes to test a sample, without additional materials or instruments and is easy to operate.

Aluminum crimp-top cap, 5.5mm center hole, 11mm diameter, with pre-slit white PTFE/red silicone septa, 100/pk. Aijiren 11mm Crimp Top Caps with Septa can squeeze the septa between the rim of the crimp vials and the folded aluminum cap. The crimp cap has a good sealing effect and can effectively prevent the sample from evaporating. In addition, this type of bottle cap can keep the position of the septum unchanged when the autosampler is used for puncture sampling of the sample. High quality and performance, the septa and cap for crimp top sample vials are welcomed by more and more clients around the world.

15-425 black screw pp cap has a 15mm outer diameter, which means it is compatible with vials that have a corresponding neck size and threading. These caps are typically made from high-quality materials such as polypropylene. These polypropylene caps have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, and household oils. Polypropylene Hole Caps are known for good impact strength, cost-effectiveness, and pliability.

4ml 13-425 screw neck vial, also called wash vial or waste vial, is for cleaning the needles during automatic sampling. Vials are manufactured of Clear, or Amber borosilicate glass and include a write-in patch for sample identification. Caps are made of high-quality polypropylene to exact manufacturing tolerances and lined in a controlled manufacturing environment. Cap colors are available in black only. Our septa use only the highest quality materials to ensure proper function and can be pre-slit to ease needle penetration.

Item: 250uL Micro Insert for 9mm HPLC Vials
Volume: 0.25ml
Color: Transparent
OEM: Available
Sample: Free
Certification: ISO9001:2015
Place of Origin: China (Mainland)
Compatibility: 2ml HPLC Vials
Polyspring inserts are self-aligning and provide a cushion against needle contact

Glass autosampler vial, 4ml, 15mm x 45mm, used with 13-425 screw caps.
1.Ideal for general laboratory use and sample storage.
2.Chemically inert caps suitable for most chromatography and storage applications
3.Top grade PTFE/silicone septa used for cleanliness

Usage: Laboratory Analysis
Logo: Customized Accepted
Trademark: Aijiren
Origin: China
OEM: Available
Sample: Provided Freely

These 2ml HPLC Vials with Caps are 40% large and are designed for use in robot autosamplers, known as Agilent. So welcome your inquiry about 2ml HPLC Vials with Caps and other chromatography vials from Aijiren.

Aijiren polypropylene snap micro vials can be used in most standard gas and liquid chromatography autosamplers. These lightweight, economical vials are made from durable polypropylene which has good chemical resistance. The conical interior ensures maximum retrieval of contents without the hassle of using removable inserts. A body size of 12*32mm makes it compatible with most autosamplers such as Agilent, Varian, etc. Snap/crimp top compatible with caps that are used with 11mm snap ring vial and crimp neck vial ND11. PP Micro Vial with one of our seals can be obtained as a 2in1 KIT Special Push-On Cap with a thinner penetration point made of Polyethylene for Snap Ring Vials and Crimp Neck Vials ND11.

The 2ml 10mm clear HPLC vials can be suitably employed to inject samples from an autosampler. They come in a variety of sizes, 2ml 10mm clear HPLC vials being ubiquitously used.
Vial Volume: 1.5-2.0ml
Clear: Amber and Clear
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

Wholesale 10-425 Screw Caps with Septa 7mm Centre Hole or Closed Top for Laboratory

Vial Dimension: 12x32mm
Vial Volume: 1.5-2.0ml
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers

This type of glass has a borosilicate structure. It is ideal for containing all injectable preparations with acid, neutral and alkaline pH. It also has good resistance to thermal shocks and can be sterilized before or after filling.
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap

2ML Autosampler Vials are ubiquitous in analytical laboratories and vendors have developed many varieties to meet the various needs of scientists.
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers

Crimp Vials squeeze the septum between the rim of the glass vial and the crimped aluminum cap. This forms an excellent seal preventing evaporation. The septum stays seated during piercing by the autosampler needle. The crimp cap vial requires crimping tools to carry out the sealing process. For low volume settings, manual crimper tools are the choice. For high volume settings, automated crimpers are available.

A 2ml snap autosampler vial is widely used in HPLC applications and can be used almost as universal sample vials for autosamplers, including sample vials with automatic operation. The vial features an 11mm snap ring closure, which provides a secure and leak-proof seal. These 2ml snap autosampler vials are recommended for short-term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal. Vials have a 40% larger opening than standard aluminum seal vials for easier sample filling and to reduce the chance of bent or broken needles during sampling. Compared with crimp top vials, snap vials can be capped and uncapped easily without tools, making it more convenient to use.

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

11mm snap top autosampler vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

11mm Wide Opening Crimp Top Autosampler Vials are made of clear Type 1, Class A Borosilicate Glass with a writable label for sample identification.
Product Size: Pack of 100
Type: Target LoVial Clear Glass Vial
Vial Closure Size: 11mm
Vial Volume (Metric): 2mL
Description: Target LoVial, 2mL Clear Glass Vial
Item Description: 11mm Crimp Top Vial, Wide Opening
Volume (Metric) Working: 1.8mL

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible.The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Our 9mm autosampler vials are available in both amber and clear. The associated 9mm autosampler vials caps and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
Product Name: China supplier 9mm autosampler vials for sale
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Custom Order: Accept

Aijiren pp caps for 2ml 9-425 screw-top vials with caps lined with PTFE/Silicone septa are used in chromatography analysis, it can be used in HPLC/GC Application.
Size: 9mm
Cap Material: PP
Color: Blue or Customized
Application: For 2ml 9-425 Screw Top Vials
Matching Brands: Waters, Varian, Shimadzu etc

2ml Clear HPLC Screw Vials are preferentially used on instruments of the following manufacturers: Jasco, Perkin Elmer, Shimadzu, Varian, Waters, etc., or General Storage. Factory Directly Supply 2ml Clear HPLC Screw Vials over 15 Years Exporting Experience.

Preassembled polypropylene snap-top closures with a 6mm center hole, including  PTFE/silicone septa. To use with 11mm snap-top vials. Snap caps provide a secure seal, minimizing evaporation even with volatile samples. Snap ring closures N11 should only be used in HPLC, as the punctual compacting pressure of the septum against the vial rim by the four pins in the cap does not achieve the same level of tightness as the evenly applied pressure through a screw thread or by crimping.

4ml 13-425 screw neck vial, also called wash vial or waste vial, is for cleaning the needles during automatic sampling. 13-425 screw thread caps, septa, and vials are designed for specific use with the Shimadzu and Waters WISP 48-Position Autosampler. 4mL vials are widely used in compound storage as well as for chromatography sample vials. Aijiren 13-425 screw neck vial is generally made of high-quality Borosilicate Glass or 1st hydrolytic class glass. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, and suitable for most chromatographic applications and includes a write-in patch for sample identification. Available with graduated marking spots.

Storage vials also named sample vials, used in the package of biological agent, cosmetics, high value chemistry and so on.

Storage vials are suitable for the packaging of various pharmaceutical intermediates, high value-added chemicals, chemical reagents, biological reagents, cosmetics, essences and oils, etc. It is suitable for long-term storage and transportation for products, and has excellent sealing performance.
Aijiren offers many standard vials and vial kits for volatiles sampling, compound storage and other non-chromatography applications.

The short thread ND9 Vials are primarily utilized to inject samples from an autosampler. They are sold in several sizes, although 2 mL vials are more generally used.
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

The 9mm screw vials are made of transparent Type 1 Class A or amber Type 1 Class B borosate glass. The 9mm screw vials are forged at high temperatures from borosilicate glass.

Aijiren polypropylene snap ring micro vials can be used with most standard GC and LC autosamplers. These lightweight, economical vials are made from durable polypropylene with good chemical resistance. The tapered interior ensures maximum collection of contents without the hassle of removable inserts. With body size of 12*32mm makes it compatible with most autosamplers such as Agilent, Varian, etc. Snap/crimp top compatible with caps that are used with 11mm snap ring vial and crimp neck vial ND11.

9mm screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

2 mL Standard Opening Vials from Aijiren. Our standard 2 mL vial is 12 mm in diameter, 32 mm in height, and has a 4.6 mm opening.

11mm Crimp Top Autosampler Vial for GC and HPLC. Vials have a 40% larger opening than standard opening aluminum seal vials, manufactured of Clear or Amber borosilicate glass. The standard 12x32mm profile is compatible with 11mm aluminum seal closures. The precision-shaped bottleneck can improve the processing capacity of the autosampler. In order to ensure good function, it can be slit in advance to facilitate needle penetration, designed for single injection or short sampling cycle, and especially suitable for liquid chromatography. 

Aijiren 2ml 10mm chromatography amber vials are constructed from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 2ml 10mm chromatography amber vials and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
Vial Dimension: 11.6*32mm
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

Aijiren 11mm snap ring vials have a volume of 1.5mL and eliminate the need for crimpers or decapping tools. Recommended for HPLC applications only. Snap ring vials eliminate the need for crimping and decapping tools. 40% larger opening improves sample accessibility and reduces the risk of autosampler needle damage. Optional white ceramic writing patch and fill marks for easy labeling. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short-term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

Aijiren HPLC, GC, and autosampler vial and 9mm blue screw caps products are manufactured to provide high-quality, state-of-the-art solutions for your most challenging, sensitive applications.
Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

The 9mm Short Thread Caps that are included with this kit are knurled on the sides for excellent gripping and comfort when applying to the vial. Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage.Screw Cap Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap.

Aijiren polypropylene screw micro vials can be used in most standard gas and liquid chromatography autosamplers. The PP micro vial is constructed from high-quality polypropylene, a chemically inert and durable plastic material known for its excellent chemical resistance. This material ensures that the vial does not react with or contaminate the sample. The vial features a threaded screw neck, which allows for a secure and airtight seal when the cap is screwed onto the vial. This feature is crucial to prevent sample evaporation and contamination. Aijiren PP vials combine the robustness of TPX PMP with the benefits of glass or PP micro inserts.

20mm crimp headspace vial is widely used in Headspace and GC, GCMS application.

Product Size: Pack of 100
Vial Closure Size: 11mm
Vial Volume (Metric): 2mL
Description: Target LoVial, 2mL Clear Glass Vial
Item Description: 11mm Crimp Top Vial, Wide Opening
Volume (Metric) Working: 1.8mL

There are many differences between butyl and natural rubber. The main advantage is that butyl rubber has better chemical stability and aging resistance than natural rubber. It has the elasticity of natural rubber and does not contain protein ingredients, but it does not have butyl. Chemical inertness and aging resistance

Aijiren 2 mL crimp top vials are our recommended vials for gas chromatography applications. The crimp top vials are the best option for customers concerned with evaporation of their volatile samples, as the crimp seal significantly reduces the opportunity for evaporation. Crimp vials are also used for samples in which chain-of-custody or tamper-proof closures are required. 2 mL crimp top vials are manufactured from type 1 borosilicate glass. The high-quality material has very low metal content to help avoid sample deterioration or leaching. Precisely shaped bottlenecks increase autosampler throughput. Made of PTFE/silicone fusion, this septum has excellent inertness and can be used for multiple injections.

Clear 2ml HPLC Vials and closures are universally suitable on most autosamplers. Due to their artificially reduced cap-height screw caps, N9 doesn’t have a standardized thread design.

9mm Screw conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm.

Fused-insert sample vials work with both snap caps and crimp caps. These small samples fused-insert vials work with both snap caps and crimp caps. 11mm Glass Crimp Neck Vials with Fused Inserts are ideal for handling small-volume samples while delivering low residual volume. 11mm Glass Crimp Neck Vials with Fused Inserts offers the simplicity and functionality of typical micro vials at a fraction of the cost. 0.3 ml clear glass micro insert fixed in 2 ml glass vial. Bottom fixed micro insert to keep the vial central vertical. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; to ensure excellent functions, it is particularly suitable for gas chromatography, and to ensure that the septum does not fall into the sample vial during the injection process.
The adhesive-free bonding process is used to combine the polytetrafluoroethylene membrane and the silicon rubber or silicone bond together to maintain the excellent characteristics of the two materials. The polytetrafluoroethylene layer of the composite septum is in contact with the reagent. It is chemically inert and resistant to acid, alkali, temperature, and adhesion. It does not work with concentrated acid, concentrated alkali, or strong oxidants even at high temperatures. At the same time, the elasticity of silicone rubber or silicone layer can ensure sealing performance.

The 2ml clear snap-top HPLC vials made by Aijiren have openings in three sizes: 8mm, 9mm, and 10mm. The 2ml clear snap-top HPLC vials are usually grouped according to the diameter of the vial, the height of the vial, and the finish of the screw.

9mm screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Laboratory 15mm Black Screw PP Cap ,9mm Center Hole,Closed-Top with PTFE Silicone Septa for 15-425 vials.Screw thread cap & septa that’s ideal for general laboratory use and storage of samples.

Aluminum crimp seals with pre-fitted septa crimp top and snap cap vials. Crimp top vials provide an excellent seal for long-term sample storage and analyses involving high volatile solvents.

Short Thread Bonded Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; Adhesive-free bonding process, without the introduction of adhesive, the septum retains the excellent resilience performance of silicone rubber or silicone, softer than the septum of the adhesive process, which can provide better needles for the autosampler. protection of. Strict production management ensures product quality. The Bonded Caps with Septa are clean and ready to use without cleaning.

Autosampler vials for HPLC are generally grouped depending on the diameter of the vial, the height of the vial, and, the thread finish. Both clear glass and amber glass are highly inert.
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Vial Height(mm): 32±0.3
Mouth Diameter(mm):6.15±0.15

The Hand Decrimper is typically designed to work with two common crimp cap sizes, which are 11mm and 20mm. These sizes correspond to the diameter of the crimp caps, indicating their compatibility with specific vial sizes. This tool is typically made of durable materials such as stainless steel or high-quality aluminum. These materials are chosen for their strength and resistance to corrosion, ensuring long-lasting performance. The decrimping features a handle, often designed with ergonomic considerations for comfortable and efficient use by laboratory personnel. The handle provides a firm grip for precise control during the decrimping process.

Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

For some applications Polypropylene HPLC Vials are not suitable due to their composition and their chemical properties. Amongst these are heavy metal analysis, water and protein analysis, atomic absorption, capillary electrophoresis (CE) and ion chromatography (IC). For all these cases high purity polypropylene vials with 0.3 mL, 0.7 mL and 1.5 ml in transparent and amber are available.

10-425 Screw Neck 2ml HPLC Autosampler Vial design is characterized by universal ease of use, especially the use of automated sample introduction systems. Aijiren 10mm 2ml HPLC autosampler vial is generally made of high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert. the wide mouth of 10-425 vials can get a larger injection range, so this kind of bottle is often used to repeatedly clean the residual solution on the automatic injection needle.

Item:2ml hplc vials and 4ml washing vials supplier
Color: Clear or Amber
Brand: Aijiren Tech
Capacity Recommend: 1.5ml Standard
Payment: 100% T/T in advance
Certificate: ISO9001:2015

Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

The Aijiren hand crimper provides a consistent and dependable seal that allows secure vial closure each and every time. Hand-operated with adjustable stop,  There is a jaw pressure regulator on the operating handle and, Cushion grip for user comfort. The high-quality construction is engineered for durability and long life to provide a smooth and simple operation. tough jaws with a special metal alloy, to ensure long-term use. The adjustable hand crimper is ideal if you use varying thicknesses of septa in your analysis. This product has the ability to be adjusted for changes in septa thickness. The height of the cover is adjustable, through the bolt on the jaw head, with hexagonal. 

All 2ml HPLC Vials may appear to be created equal, but quality and performance make the difference when analyzing vital samples. Aijiren as a leading manufacturer in China, supplies high-quality chromatography consumables such as 2ml HPLC Vials with Cap and syringe filters.

Septa Material: PTFE/Silicone (White)
Usage: 20ml Crimp Headspace Vials
Production Capacity: 50000000PCS/Week
Specification: 100pcs/pack
Trademark:Aijiren
Origin: China
Payment: 100% T/T in advance

Aijiren 2ml amber HPLC vials with blue caps are constructed from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching.
Product Name: 2ml Amber HPLC Vials with Blue Caps
Place of Origin: Zhejiang, China
Packing: 100pcs/pack
Color: Amber or Clear
Size: 12*32mm

Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

18mm screw neck metal screw cap is made of magnetic metal, this cap is mainly used for seal 18mm screw GC headspace vial. PTFE septa can meet multiple punctures.
Steel Magnetic caps tolerate high temperatures and are suitable for use with the CTC/LEAP/Gerstel autosamplers.

Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

The 8-425 vial has an outer diameter of 8mm, which is a common size for HPLC autosampler systems. This standard size ensures compatibility with a wide range of autosamplers and other accessories. These vials are typically made from high-quality, Borosilicate Glass or 1st hydrolytic-class glass to prevent interactions between the sample and the container. Aijiren screw thread top sample vial design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Aijiren 10mL certified screw and crimp style, clear or amber glass headspace vials. These 10ml Headspace GC Vials come in both flat- and round bottom styles for use in a wide variety of headspace instrument platforms.

2ml Clear Screw HPLC Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. 2ml Clear Screw HPLC Vial’caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly.

Sample storage vials, also known as chemical glass storage bottles, sub-packaging bottles, are suitable for the sub-packaging of various pharmaceutical intermediates, high value-added chemicals, biological preparations, cosmetics, cosmetics, essential oils and other products, suitable for long-term storage and transportation of products , Has excellent sealing performance.

Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

2.0ml 10-425 Screw Vials ND10 can be used for GC and HPLC. Wide opening enables easy filling with viscous materials. HPLC Autosampler Vials are cleaned and packaged in a certified Class 100000 clean room according to a designed process, developed to eliminate chromatographic errors associated with vials. Critical physical dimensions are fully tested, as well as chemical cleanliness testing to ensure that trace levels of residues are not present.
Aijiren 10mm 2ml HPLC autosampler vial is generally made of high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert.