Hot Sell Factory Laboratory Wholesale Pre-slit PTFE/Silicone Septa Manufacturer

Preassembled polypropylene snap-top closures with a 6mm center hole, including  PTFE/silicone septa. To use with 11mm snap-top vials. Snap caps provide a secure seal, minimizing evaporation even with volatile samples. Snap ring closures N11 should only be used in HPLC, as the punctual compacting pressure of the septum against the vial rim by the four pins in the cap does not achieve the same level of tightness as the evenly applied pressure through a screw thread or by crimping.

2ML Autosampler Vials are ubiquitous in analytical laboratories and vendors have developed many varieties to meet the various needs of scientists.
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers

20ml precision screw headspace vial, 18mm, round bottom, top space vial, strong adsorption

The butyl rubber stopper is an off-white rubber-like solid with a density of 0.92g/cm3. It is odorless, insoluble in water, and soluble in hexane and chloroform. The product also has low air permeability, good airtightness, and good resistance. Ozone resistance, chemical resistance, electrical insulation, flexibility resistance, heat aging resistance, energy absorption and other characteristics.

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance. A headspace vial is used in the process of top–gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial. The material of Headspace Vials is low extractable Borosilicate glass with a low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance, and high chemical stability. Headspace Vials are suitable for headspace analysis of volatile solids and gases.

Aijiren polypropylene snap micro vials can be used in most standard gas and liquid chromatography autosamplers. These lightweight, economical vials are made from durable polypropylene which has good chemical resistance. The conical interior ensures maximum retrieval of contents without the hassle of using removable inserts. A body size of 12*32mm makes it compatible with most autosamplers such as Agilent, Varian, etc. Snap/crimp top compatible with caps that are used with 11mm snap ring vial and crimp neck vial ND11. PP Micro Vial with one of our seals can be obtained as a 2in1 KIT Special Push-On Cap with a thinner penetration point made of Polyethylene for Snap Ring Vials and Crimp Neck Vials ND11.

9mm screw autosampler vial with PP screw cap and PTFE septa is packaged in one box. This HPLC vial package can also be printed your logo on it. Do you want need this package?

9mm 2ml Short Tread Glass HPLC Autosampler Vials have two different materials, one is borosilicate glass, and the other is imported first-grade hydrolytic glass, which can meet the different needs of customers; The 2mL Amber Screw Top Autosampler Vials are made from high-quality amber glass, providing excellent protection against light and UV radiation. The amber color helps to preserve the integrity of light-sensitive samples during storage or analysis. Amber glass vials are perfect for storing samples that are sensitive to light exposure. Clear glass vials are great for testing the solubility or dispersibility of materials, allowing you an unhindered view of the solution.

2ml Clear Screw HPLC Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. 2ml Clear Screw HPLC Vial’caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly.

OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Vial Height(mm): 32±0.3
Mouth Diameter(mm):6.15±0.15
Quantity: 100 vials & 100 caps

The short thread ND9 Vials are primarily utilized to inject samples from an autosampler. They are sold in several sizes, although 2 mL vials are more generally used.
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

Usage: Laboratory Analysis
Logo: Customized Accepted
Trademark: Aijiren
Origin: China
OEM: Available
Sample: Provided Freely

The Aijiren 2ml clear screw HPLC vials Certified Vial Convenience Kit (Opening 9mm) is full lot tested in multiple ways for 15 critical parameters. Aijiren’s 2ml clear screw hplc vials for autosampler is usually divided into three types of calibers.

The cap is made of aluminum. Aluminum is commonly used due to its excellent sealing properties and resistance to corrosion. The septa is a critical component of the cap and is made of silicone or PTFE (polytetrafluoroethylene).  It is positioned inside the cap and serves as a barrier between the sample and the external environment. The cap has a crimp top design, which means it can be securely attached to the vial by using a crimping tool. This process involves crimping the cap around the vial’s neck, creating a tight and tamper-evident seal. These caps with septa provide an effective barrier against contamination, evaporation, and changes in sample composition, ensuring that the sample remains stable and reliable for analysis. 

Headspace vials are designed to withstand high internal pressure, therefore all Aijiren brand headspace vials have a wall thickness of 1.2mm for added safety, thus it is assured that the vial will not burst. 
Capacity (mL): 20
Diameter (mm): 23
Height (mm): 75
Quantity: 100
Base Style: Round Bottom
Finish: Beveled Edge
Color: Clear
Marking Spot: NO

These 2ml HPLC Vials with Caps are 40% large and are designed for use in robot autosamplers, known as Agilent. So welcome your inquiry about 2ml HPLC Vials with Caps and other chromatography vials from Aijiren.

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples. High recovery vials offer precision vials made from low expansion borosilicate glass and are designed with a unique interior bottom, solid glass bottom of a Microliter-Vial with an inner cone, allowing for maximum retrieval of contents by a syringe. High Recovery Vials Reduce Residual Product Waste by 99%. high recovery vials are optimal for manual and automated compound or biological sample applications.

Flat bottom glass inserts have the largest capacity and are the most economical inserts. These inserts are cylindrical in shape with a flat bottom.Aijiren is the leading supplier of Flat bottom glass inserts since 2007.

Chromatography septas can be pre-slit. A pre-slit septum is an ideal choice in applications requiring 20% or more of the sample injection each time from the vial so that suction is avoided. The slit allows ambient gas to equalize the gas in the vial so that a vacuum is not created in the vial from the tight seal around the needle. If coring or clogging from a narrow needle or needle deflection from highly durable septa material is a concern, then choosing a pre-slit septum is a better choice.
A PTFE/Silicone with a slitted septum allows for easier needle penetration as well as to release the vacuum that forms when a large volume of sample is withdrawn from a vial. This septum provides chromatographic characteristics similar to that of a septum without a slit except that the ability to withstand exposure to aggressive solvents is slightly lessened. Pre-slit septa are highly recommended for improving injection-to-injection reproducibility with autosamplers withdrawing greater than 50µL of sample from a 2mL vial, due to possible cavitation (vacuum).

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)

Storage vials also named sample vials, used in the package of biological agent, cosmetics, high value chemistry and so on.

Storage vials are suitable for the packaging of various pharmaceutical intermediates, high value-added chemicals, chemical reagents, biological reagents, cosmetics, essences and oils, etc. It is suitable for long-term storage and transportation for products, and has excellent sealing performance.
Aijiren offers many standard vials and vial kits for volatiles sampling, compound storage and other non-chromatography applications.

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples.

9mm screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

The crimp cover of the jaws is made of aluminum for crimping and sealing. Suitable for 20mm Crimp Top Headspace Vials.

Micro vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Materials of construction: pp chamber, PP plunger outer housing, borosilicate glass plunger inner storage vial, silicone septa with PTFE liner, PP cap
Vial Size: 12 x 32 mm
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL
Maximum operating temperature: 122°F (50°C)
Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample

Aijiren polypropylene snap ring micro vials can be used with most standard GC and LC autosamplers. These lightweight, economical vials are made from durable polypropylene with good chemical resistance. The tapered interior ensures maximum collection of contents without the hassle of removable inserts. With body size of 12*32mm makes it compatible with most autosamplers such as Agilent, Varian, etc. Snap/crimp top compatible with caps that are used with 11mm snap ring vial and crimp neck vial ND11.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)

There are a lot of factors to consider when selecting a chromatography vial. Aijiren Tech offers a large selection of 0mm 10-425 HPLC vials and closures, including HPLC vials, inserts, caps, and septa to suit your analytical needs.
Vial Dimension: 11.6*32mm
Vial Volume: 1.5-2.0ml
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Vial Material: Borosilicate Glass/Glass Type 1

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples. High recovery vials offer precision vials made from low expansion borosilicate glass and are designed with a unique interior bottom, solid glass bottom of a Microliter-Vial with an inner cone, allowing for maximum retrieval of contents by a syringe. High Recovery Vials Reduce Residual Product Waste by 99%. high recovery vials are optimal for manual and automated compound or biological sample applications.

Aijiren autosampler vials cover a wide range of applications, from microsampling to headspace analysis. 4ml 13-425 Screw Thread Vials are manufactured of Clear, or Amber borosilicate glass and include a write-in patch for sample identification. Available with graduated marking spots. Our septa use only the highest quality materials to ensure proper function and can be pre-slit to ease needle penetration. When paired with Aijiren’s cap& septa, our screw or crimp caps securely seals your samples and helps prevent sample loss from evaporation. 13-425 Screw Thread Vials are manufactured from Type 1 borosilicate glass, available in clear or amber, or from Polypropylene. Excellent for long-term storage.

The butyl rubber stopper is an off-white rubber-like solid with a density of 0.92g/cm3. It is odorless, insoluble in water, and soluble in hexane and chloroform. The product also has low air permeability, good airtightness, and good resistance. Ozone resistance, chemical resistance, electrical insulation, flexibility resistance, heat aging resistance, energy absorption and other characteristics.

The 9mm screw vials are made of transparent Type 1 Class A or amber Type 1 Class B borosate glass. The 9mm screw vials are forged at high temperatures from borosilicate glass.

11mm Crimp Top Autosampler Vial for GC and HPLC. Vials have a 40% larger opening than standard opening aluminum seal vials, manufactured of Clear or Amber borosilicate glass. The standard 12x32mm profile is compatible with 11mm aluminum seal closures. The precision-shaped bottleneck can improve the processing capacity of the autosampler. In order to ensure good function, it can be slit in advance to facilitate needle penetration, designed for single injection or short sampling cycle, and especially suitable for liquid chromatography. 

The cap is made of aluminum. Aluminum is commonly used due to its excellent sealing properties and resistance to corrosion. The septa is a critical component of the cap and is made of silicone or PTFE (polytetrafluoroethylene).  It is positioned inside the cap and serves as a barrier between the sample and the external environment. The cap has a crimp top design, which means it can be securely attached to the vial by using a crimping tool. This process involves crimping the cap around the vial’s neck, creating a tight and tamper-evident seal. These caps with septa provide an effective barrier against contamination, evaporation, and changes in sample composition, ensuring that the sample remains stable and reliable for analysis. 

Aijiren is the largest chromatography consumable manufacturer in south of China. There are HPLC vial, GC vial, Septum and closures, EPA vial, TOC vial, Test tube, Reagent bottle and Syringe filter in Aijiren shop. You can get all the consumables in wholesale price. Please choose your needed in precise catalog.

The classification of HPLC autosampler vials is generally done based on the diameter of the vial body, vial height, and thread finish.Our 2ml Screw HPLC Vials are the perfect fit for HPLC and GC instrument platforms across a wide variety of applications.

2ml snap autosampler vial is widely used in HPLC applications and can be used almost as universal sample vials for autosamplers, including sample vials with automatic operation. The vial features an 11mm snap ring closure, which provides a secure and leak-proof seal. Snap ring closures are easy to use and ensure that the vial remains tightly sealed during sample storage and analysis. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

2ml Amber Screw HPLC Vials, caps, septa, and inserts working as a whole to prevent sample degradation and loss of samples caused by evaporation. Screw thread closures N9 (9mm) 2ml vials and closures are universally suitable on most autosamplers, convenient in handling and available in a broad selection of different cap colors and septum materials.

The 2ml HPLC Screw Vials are made from clear/ amber, Type I borosilicate and 33 expansion glass.2ml Amber HPLC Screw Vials with unique thread design ensures consistent seal and can be reused, not volatile, easy to use, Reduce the chances of bent or broken needles during sampling.

Vial Dimension: 12x32mm
Vial Material: Borosilicate Glass/Glass Type 1
Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Pack:Vials:100 Pieces with Heat-shrinkable plastic box+Carton
Cap&Septa:100pieces/Bag+Carton

Material is Brosilicate Glass/1st hydrolytic class glass. 100pcs packed in one box. Available in clear and amber.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

All chromatography vials produced by Aijiren are made of boronic acid glass. Aijiren’s chromatography vials are always the main product. If you are interested, please contact online customer service.

9mm Short Thread Vial with integrated 0.3ml Micro-Insert, 32 x 11.6mm, Amber or clear glass, 1st hydrolytic class, label and filling lines, 100/pk
Aijiren 9mm glass vial with fused insert together eliminates movement of the insert. The fused insert also eliminates concerns about contaminants around the fused seam/space between the neck of the vial and the insert. Vials without graduation, all micro inserts are clear glass. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples.

Aijiren has own R&D Center and Quality Controll Center to keep products in high quality. All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials is developed in Europe and the United States, and the design feature is easy to use, especially the use of an automated sample introduction system.
Aijiren 10mm 2ml HPLC autosampler vial is generally made of high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert.

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

Our polypropylene vials and crimp caps are the perfect fit for HPLC and GC instrument platforms across a wide variety of applications. Polypropylene Caps are known for good impact strength, cost-effectiveness, and pliability.

These 2ml Screw Top Plastic Autosampler Vials are made to consistent quality standards and are an excellent choice for ion Chromatography, CE, Bio-analysis, or General Chromatography when organic solvents are not needed. Minimized ionic interactions and adsorption with vial walls provide consistent results for proteins and peptides. 2ml screw top plastic autosampler vials are made of high-quality GC-tested polypropylene material. Polypropylene vials are chemically inert and suitable for most chromatography experiments, the material of choice for pH-sensitive samples, and sodium or heavy metal analyses. Plastic bottles may be used over traditional glass bottles when the content of inorganic ions must be kept to an absolute minimum.

The Aijiren 2ml clear screw HPLC vials Certified Vial Convenience Kit (Opening 9mm) is full lot tested in multiple ways for 15 critical parameters. Aijiren’s 2ml clear screw hplc vials for autosampler is usually divided into three types of calibers.

Vial Material: First grade hydrolyzed glass, Borosilicate glass

The 2ml chromatography vial is forged at high temperatures from borosilicate glass. The Aijiren Scientific 2ml chromatography vial Certified Vial Convenience Kit (Opening 9mm) is fully lot tested in multiple ways for 15 critical parameters.

Wholesale 10-425 Screw Caps with Septa 7mm Centre Hole or Closed Top for Laboratory

The Hand Decrimper is typically designed to work with two common crimp cap sizes, which are 11mm and 20mm. These sizes correspond to the diameter of the crimp caps, indicating their compatibility with specific vial sizes. This tool is typically made of durable materials such as stainless steel or high-quality aluminum. These materials are chosen for their strength and resistance to corrosion, ensuring long-lasting performance. The decrimping features a handle, often designed with ergonomic considerations for comfortable and efficient use by laboratory personnel. The handle provides a firm grip for precise control during the decrimping process.

0.3 ml clear glass micro insert fixed in 2ml glass vial, designed for valuable samples to save for testing use volume

Aijiren is the leading supplier of chromatography consumables, can offer hplc vials,hplc syringe filter, EPA VOA vials, and some other test tubes.
Any requirement for chromatography consumables, please contact us.

9mm Chromatography and HPLC Autosampler Vials and closures listed in this section are designed, engineered, and manufactured for optimum performance with HPLC and LC/MS applications.
Size: 11.6*32mm（with Write-on Spot）
Volume: 2ml Vial Diameter(mm):11.6±0.25
Vial Height(mm): 32±0.3
Mouth Diameter(mm):6.15±0.15
Quantity: 100 vials & 100 caps
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)

20mm crimp headspace vial is widely used in Headspace and GC, GCMS application.

Polypropylene vials are an economical alternative to glass for some applications. The vial is primarily constructed from high-quality, durable polypropylene or polymethyl pentene (PMP). This plastic is typically chosen for its chemical resistance, inertness, and transparency. Polypropylene is the most popular plastic material. Polypropylene vials have heat resistance of up to 135 degrees Celsius and are commonly used in chromatographic experiments. PMP has higher heat resistance – up to 175 degrees Celsius – and is transparent, increasing the sample’s visibility inside the sample bottle. The vial typically has a standard 9mm outer diameter, making it compatible with a wide range of autosampler systems commonly used in laboratories.

Aijiren COD Test Tube is made of borosilicate glass, which can reduce pH changes and pollutants that may be leached from soda lime glass. The glass digestion test tube can be used for analysis at temperatures higher than 130 degrees Celsius. It is manufactured from laboratory storage for a variety of general purposes and can hold almost anything. The gasket is made of a PTFE silicon rubber gasket, which has strong sealing performance and can resist various chemical corrosion. The  COD Test Tube is small in size and light in weight. It can be tested without any other laboratory equipment and technicians; it only takes 3-5 minutes to test a sample, without additional materials or instruments and is easy to operate.

Materials of construction: pp chamber, PP plunger outer housing, borosilicate glass plunger inner storage vial, silicone septa with PTFE liner, PP cap
Vial Size: 12 x 32 mm
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL
Maximum operating temperature: 122°F (50°C)
Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample

There is one type of Vial produced by Aijiren that has the best sealing performance, that is, 20mm Headspace Crimp Vial, but it coexists with the tight sealing characteristics of Crimp Neck Vial and there is also the problem of how to seal it. Aijiren provides a 20mm Hand Crimper and Decrimper to match the Crimp Vial. Aijiren’s handheld crimping machine provides a consistent and reliable seal, ensuring that the vial is securely sealed every time. The high-quality structure has been carefully designed, has durability and long life, and can provide smooth and simple operation. Manually adjustable stop, comfortable to hold the cushion, economical and durable.

Magnetic Screw caps for CTC are novelties in the crimped neck-dominated Headspace market. However, especially for the hard-to-crimp magnetic caps, screw closures are a convenient alternative. It is constructed from metal, which ensures durability, strength, and resistance to environmental factors, making it suitable for long-lasting applications. The cap is equipped with a magnetic feature. This is extremely useful in precision work where screws need to be secured and placed accurately.

Amber 9mm HPLC Vials with Insert are universally suitable on most autosamplers, convenient in handling, and available in a broad selection of different cap colors and septum materials.

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance. A headspace vial is used in the process of GC  chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial. The material of Headspace Vials is low extractable Borosilicate glass with a low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance, and high chemical stability. Headspace Vials are suitable for headspace analysis of volatile solids and gases.

9mm 2ml Short Tread Glass HPLC Autosampler Vials have two different materials, one is borosilicate glass, and the other is imported first-grade hydrolytic glass, which can meet the different needs of customers; The 2mL Amber Screw Top Autosampler Vials are made from high-quality amber glass, providing excellent protection against light and UV radiation. The amber color helps to preserve the integrity of light-sensitive samples during storage or analysis. Amber glass vials are perfect for storing samples that are sensitive to light exposure. Clear glass vials are great for testing the solubility or dispersibility of materials, allowing you an unhindered view of the solution.

Aijiren 11mm snap ring vials have a volume of 1.5mL and eliminate the need for crimpers or decapping tools. Recommended for HPLC applications only. Snap ring vials eliminate the need for crimping and decapping tools. 40% larger opening improves sample accessibility and reduces the risk of autosampler needle damage. Optional white ceramic writing patch and fill marks for easy labeling. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short-term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

The 9mm Short Thread Caps that are included with this kit are knurled on the sides for excellent gripping and comfort when applying to the vial. Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage.Screw Cap Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap.

Suitable for 9mm Short Thread Vials. Caps is made of polypropylene. Septa is made of PTFE / Silicone. Color can be customized. 6mm Centre Hole or Closed Top can be selected.

Advances in glass vial manufacturing now produce the type of threads that are needed to properly seal the vial and cap under pressure, producing a Screw Top Headspace System that works well together.
Sample: Provided Freely
Packing: 100pcs/pk
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Brand: Aijiren Tech

Preassembled polypropylene snap-top closures with a 6mm center hole, including  PTFE/silicone septa. To use with 11mm snap-top vials. Snap caps provide a secure seal, minimizing evaporation even with volatile samples. Snap ring closures N11 should only be used in HPLC, as the punctual compacting pressure of the septum against the vial rim by the four pins in the cap does not achieve the same level of tightness as the evenly applied pressure through a screw thread or by crimping.

Amber 2ml HPLC Vial are available in a variety of neck finishes and opening diameters. Amber 2ml HPLC Vial with Caps are available as individual components as well as convenience kits that include vials, caps and septa.

10-425 screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

11mm snap top autosampler vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

These septa are designed to work on most HPLC screw vials. Screw HPLC Vials offer the convenience of screw thread vials for vials that were originally designed for screw-top vials. They are available in both clear and amber glass.

Aluminum crimp seals with pre-fitted septa crimp top and snap cap vials. Crimp top vials provide an excellent seal for long-term sample storage and analyses involving high volatile solvents.

The 11mm snap-top caps are made of high-quality polypropylene. The caps have a roll-edge or snap-on shape. The snap-top caps provide a secure seal that minimizes evaporation even for volatile samples.

Items: HPLC Septa
Material: PTFE/Silicone
Application: For HPLC Analysis
Sample: Free
Usage: Laboratory Analysis
OEM: Available
Certification: ISO9001:2022
Place of Origin: China (Mainland)

Economical and convenient storage for samples of your hplc vials rack. PVC rack features a clear see-through lid. All hplc vials rack feature alphanumeric indexing for easy tracking of samples.
Color: Blue
Suitable: 2ml Vials
Racks feature alphanumeric indexing for easier vial identification.
Racks can be stacked for efficient storage.
Fits most 2.0 mL, 11.6 x 32 mm vials (vials sold separately).

Original Place: Zhejiang, China
Brand: Aijiren
Size: 11.6*32mm（with Write-on Spot）
Volume: 2ml Vial Diameter(mm):11.6±0.25
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

The slit allows ambient gas to equalize the gas in the vial so that a vacuum is not created in the vial from the tight seal around the needle.
If coring or clogging from a narrow needle or needle deflection from highly durable septa material is a concern, then choosing a pre-slit septum is a better choice.
A PTFE/Silicone with a slitted septum allows for easier needle penetration as well as to release of the vacuum that forms when a large volume of sample is withdrawn from a vial.

18mm Magnetic Screw Cap, Magnetic with Pre-fitted Silicone/PTFE Liner fit for 20ml headspace vials.
Manufacturer: Aijiren Tech
Transport Package: Pack
Production Capacity: 50000PCS/Day
Specification: 100pcs/pack

Aijiren polypropylene screw micro vials can be used in most standard gas and liquid chromatography autosamplers. The PP micro vial is constructed from high-quality polypropylene, a chemically inert and durable plastic material known for its excellent chemical resistance. This material ensures that the vial does not react with or contaminate the sample. The vial features a threaded screw neck, which allows for a secure and airtight seal when the cap is screwed onto the vial. This feature is crucial to prevent sample evaporation and contamination. Aijiren PP vials combine the robustness of TPX PMP with the benefits of glass or PP micro inserts.

Septa Material: PTFE/Silicone (White)
Usage: 20ml Headspace Vials
Production Capacity: 50000000PCS/Week
Specification: 100pcs/pack
Trademark:Aijiren
Origin: China

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

Aijiren 9mm high recovery screw vial is made of borosilicate class, so it has a good Liner coefficient. In the chromatography analysis field, 9mm high recovery screw vials are widely used in Life science and technology, Environmental Protection, and Food Safety. Smooth, conical interior surfaces facilitate complete sample recovery. high recovery vials offer precision vials made from low expansion borosilicate glass and designed with a unique interior bottom, solid glass bottom of a Microliter-Vial with an inner cone, allowing for maximum retrieval of contents by a syringe. These high-quality 9mm clear glass vials are 2mL, 12x32mm, and fit most brands of autosamplers. Made of superior quality borosilicate clear, they meet all requirements of US, EU, and JPN Pharmacopia.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

The 11mm snap-top caps are made of high-quality polypropylene. The caps have a roll-edge or snap-on shape. The snap-top caps provide a secure seal that minimizes evaporation even for volatile samples. PTFE/silicone septa are the product of choice for most HPLC and GC applications where resealability and high purity are critical. Ideal for applications where ease of needle insertion is important. Silicone septa have strong re-sealing properties and can still maintain good sealing performance after multiple injections; PTFE is currently a material with good chemical conditions and can withstand strong acids and alkalis. After the two materials are combined, the bottle can be used for various laboratory purposes such as sealed sampling and chemical storage.

20ml precision screw headspace vial, 18mm, round bottom, top space vial, strong adsorption

Aijiren offers proven autosampler vials and consumables for the chromatographer. The standard opening 2ml clear hplc vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.
Size:12*32mm
Classification: Laboratory Bottle
Application: For Autosampler
Material: Borosilicate Glass
Place of Origin: Zhejiang, China

Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septum is non-toxic; the glue-free bonding process does not require the introduction of adhesives, and the septum retains the excellent resilience performance of silicone rubber or silicone, which is better than the glue-based process The septa are softer.

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw

2.0ml 10-425 Screw Vials ND10 can be used for GC and HPLC. Wide opening enables easy filling with viscous materials. HPLC Autosampler Vials are cleaned and packaged in a certified Class 100000 clean room according to a designed process, developed to eliminate chromatographic errors associated with vials. Critical physical dimensions are fully tested, as well as chemical cleanliness testing to ensure that trace levels of residues are not present.
Aijiren 10mm 2ml HPLC autosampler vial is generally made of high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert.

2ml chromatography vials for HPLC. Aijiren’s 2ml chromatography vials have customized services such as the color of the pp cap, whether the vial has tick marks and label areas, and whether the customer’s brand logo is printed.

The 20mm 20ml Crimp Top Headspace vial has a 20mm outer diameter, which is the standard size for crimp-style headspace vials. The 20ml capacity refers to the volume of the vial, meaning it can hold up to 20 milliliters of liquid or gas sample. These vials are typically made from high-quality borosilicate glass. Borosilicate glass is chosen because it is resistant to chemical reactions and can withstand high temperatures, making it ideal for containing volatile samples without contamination. A headspace vial is used in the process of top – gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial.

Short Thread Bonded Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; Adhesive-free bonding process, without the introduction of adhesive, the septum retains the excellent resilience performance of silicone rubber or silicone, softer than the septum of the adhesive process, which can provide better needles for the autosampler. protection of. Strict production management ensures product quality. The Bonded Caps with Septa are clean and ready to use without cleaning.

The main application for HPLC, autosampler, chromatography, Agilent, waters machine. All autosamplers of Ajiren Tech are 100% integrity tested and manufactured according to ISO 9001 standard. If a 2ml screw HPLC vialsis required. Please contact Ajiren.

The 8-425 vial has an outer diameter of 8mm, which is a common size for HPLC autosampler systems. This standard size ensures compatibility with a wide range of autosamplers and other accessories. These vials are typically made from high-quality, Borosilicate Glass or 1st hydrolytic-class glass to prevent interactions between the sample and the container. Aijiren screw thread top sample vial design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

15-425 Screw Sample Storage vials also named sample vials, are used in the package of biological agents, cosmetics, high-value chemistry and so on. Storage vials are suitable for the packaging of various pharmaceutical intermediates, high-value-added chemicals, chemical reagents, biological reagents, cosmetics, essential oils, etc. It is suitable for long-term storage and transportation for products and has excellent sealing performance. The “15-425” designation refers to the size and threading of the vial. It has a 15mm outer diameter. These vials are typically made from high-quality materials such as Borosilicate glass. 

Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

These polypropylene caps have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, and household oils. Polypropylene Hole Caps are known for good impact strength, cost effectiveness, and pliability. Septa sold separately.Polypropylene hole caps are available preassembled with separate septa or without septa. We also feature polypropylene hole closures with bonded septa to provide assurance that the septa will not slip away from the cap while injecting.

Founded in 2007, Zhejiang Aijiren, Inc.15 years export experience, exprot to more than 70 countries, 2000+ customs around the world; IS0, GMP & Bureau Veritas certificated, this is how we keep good quality and competitive prices for global valued customers.