2ML 9mm autosampler vials supplier from China

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

2ml amber autosampler vial, 12mm Diameter, 32mm Height, 9-425 screw top. Our vials with caps are widely used in standard HPLC and GC applications. The vials can be used on all common autosamplers due to their technical geometry, preferentially they are found on Agilent, HTA, Shimadzu, Thermo, Varian, Waters, etc.

The slit allows ambient gas to equalize the gas in the vial so that a vacuum is not created in the vial from the tight seal around the needle.
If coring or clogging from a narrow needle or needle deflection from highly durable septa material is a concern, then choosing a pre-slit septum is a better choice.
A PTFE/Silicone with a slitted septum allows for easier needle penetration as well as to release of the vacuum that forms when a large volume of sample is withdrawn from a vial.

2ML Autosampler Vials are ubiquitous in analytical laboratories and vendors have developed many varieties to meet the various needs of scientists.
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

9mm screw thread vials are designed especially for use with Agilent’s and other rotating or robotic arm samplers 2ml, 12X32mm vials are manufactured of borosilicate glass and include a write-in patch for sample identification.

Here we describe a case where the type of Hplc Vials And Caps used results in an interesting phosphorous pseudorotation driven by the mild alkalinity of glass.
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml

Aijiren 9mm high recovery screw vial is made of borosilicate class, so it has a good Liner coefficient. In the chromatography analysis field, 9mm high recovery screw vials are widely used in Life science and technology, Environmental Protection, and Food Safety. Smooth, conical interior surfaces facilitate complete sample recovery. high recovery vials offer precision vials made from low expansion borosilicate glass and designed with a unique interior bottom, solid glass bottom of a Microliter-Vial with an inner cone, allowing for maximum retrieval of contents by a syringe. These high-quality 9mm clear glass vials are 2mL, 12x32mm, and fit most brands of autosamplers. Made of superior quality borosilicate clear, they meet all requirements of US, EU, and JPN Pharmacopia.

9mm screw thread vials are designed especially for use with Agilent’s and other rotating or robotic arm samplers 2ml, 12X32mm vials are manufactured of borosilicate glass and include a write-in patch for sample identification.

Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL

9mm screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

Aijiren polypropylene screw micro vials can be used in most standard gas and liquid chromatography autosamplers. The PP micro vial is constructed from high-quality polypropylene, a chemically inert and durable plastic material known for its excellent chemical resistance. This material ensures that the vial does not react with or contaminate the sample. The vial features a threaded screw neck, which allows for a secure and airtight seal when the cap is screwed onto the vial. This feature is crucial to prevent sample evaporation and contamination. Aijiren PP vials combine the robustness of TPX PMP with the benefits of glass or PP micro inserts.

The 1.5mL 9mm Short Thread Vial ND9,with its 9mm short thread design and capacity of 1.5-2.0mL, this vial makes for easy handling and integration into autosamplers. Ideal for applications requiring limited quantities. The vial comes equipped with various finishes and closure options, such as screw caps and snap caps, so researchers can select their ideal choice according to their unique research needs.

Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the 2ml HPLC and GC Autosampler Vials.
Original Place: Zhejiang, China
Brand: Aijiren
Size: 11.6*32mm（with Write-on Spot）
Volume: 2ml Vial Diameter(mm):11.6±0.25
Performance: Acid Resistance, Alkali Resistance, Temperature Resistance

Items: Micro Insert vials
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Borosilicate Glass material provides higher quality material that is more resistant to thermal shock
The integrated insert supports samples of the highest purity and sensitivity
Amber color provides for an increased shelf life optimal for storage of samples of light-sensitive samples
The highest quality ISO9001:2015 certification in the industry ensures the most accurate analysis of samples

Polypropylene as a vial material is a good choice for protein analysis because normal borosilicate glass vials are known to absorb some types of analytes such as proteins, peptides, and amines.
Insert Volume: 0.3ml
Vial Thread: Screw
Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Usage: Laboratory Analysis
Packing: 100pcs/pk

PTFE/Silicone septa are most popular for HPLC applications, and Pre-slit septa are easier to pierce with needles.
Usually, the cap color is clear or blue, other special colors can be also produced accordingly.

Aijiren offers proven 2 mL Clear Screw Top Vials and consumables for the chromatographer. Meeting the requirements of customers’ demands.
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers

As such there may be multiple types of vials being used simultaneously in a single laboratory without much consideration as to which is best suited for analytical method development and validation.
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available

Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

Item No: Aijiren hplc filter vials for sale
Vial Size: 12 x 32 mm
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL
Maximum operating temperature: 122°F (50°C)

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted

Polypropylene vials are an economical alternative to glass for some applications. The vial is primarily constructed from high-quality, durable polypropylene or polymethyl pentene (PMP). This plastic is typically chosen for its chemical resistance, inertness, and transparency. Polypropylene is the most popular plastic material. Polypropylene vials have heat resistance of up to 135 degrees Celsius and are commonly used in chromatographic experiments. PMP has higher heat resistance – up to 175 degrees Celsius – and is transparent, increasing the sample’s visibility inside the sample bottle. The vial typically has a standard 9mm outer diameter, making it compatible with a wide range of autosampler systems commonly used in laboratories.

Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers

These 2ml clear chromatography vials include 100/PK of 2ml RSA-Pro™ surface-treated glass vials with 9mm screw threads. Any requirement about 2ml clear chromatography vials,please contact AIJIREN.
Volume: 2ml
Usage: Laboratory Analysis
Brand Name: AIJIREN
Printing with Company Logo: Accept

9mm PP Screw Top Vial can be made of polypropylene or polymethyl pentene (PMP). Polypropylene is the most popular plastic material. Polypropylene vials have heat resistance of up to 135 degrees Celsius and are commonly used in chromatographic experiments.PMP has higher heat resistance – up to 175 degrees Celsius – and is transparent, which increases the visibility of the sample inside the sample bottle. Plastic vials have good chemical resistance, lightweight construction, durability, and economy.

Items: Micro Insert vials
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Borosilicate Glass material provides higher quality material that is more resistant to thermal shock
The integrated insert supports samples of the highest purity and sensitivity
Amber color provides for an increased shelf life optimal for storage of samples of light-sensitive samples
The highest quality ISO9001:2015 certification in the industry ensures the most accurate analysis of samples

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

Item: Micro Insert for 9mm Autosampler Vial
Volume: 0.15-0.3ml
Color: Transparent
OEM: Available
Sample: Free
Certification: ISO9001:2015
Packing: 100pcs/pk
Brand Name: Aijiren
Place of Origin: China (Mainland)
Compatibility: 9mm HPLC Vials

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples. High Recovery Vials Reduce Residual Product Waste by 99%.

Maximum operating temperature: 122°F (50°C)
Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample
Vial Size: 12 x 32 mm
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL
Maximum operating temperature: 122°F (50°C)

The 1.5mL 9mm Short Thread Vial ND9,with its 9mm short thread design and capacity of 1.5-2.0mL, this vial makes for easy handling and integration into autosamplers. Ideal for applications requiring limited quantities. The vial comes equipped with various finishes and closure options, such as screw caps and snap caps, so researchers can select their ideal choice according to their unique research needs.

9mm screw thread vials are designed especially for use with Agilent’s and other rotating or robotic arm samplers 2ml, 12X32mm vials are manufactured of borosilicate glass and include a write-in patch for sample identification.

9mm screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Aijiren offers proven 2 mL Clear Screw Top Vials and consumables for the chromatographer. Meeting the requirements of customers’ demands.
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers

9mm standard 2ml transparent threaded sample bottle (2ml automatic sample bottle), Φ11.6*32mm, bottle mouth diameter 9mm, red PTFE/white silicone bottle gasket, blue perforated polypropylene (PP) bottle cap, sample The bottles are transparent, brown, and can be marked with graduations. They are suitable for various types of autosamplers such as Agilent, Waters, Varian and Shimadzu.

Micro vials are designed to assist in the consistent sampling of low-volume chromatography samples.
Diameter (Metric) Outer: 11.6 mm
Volume (Metric): 0.36 mL
For Use With (Application): GC, HPLC
Neck Style: Short Thread
Shape: Flat Bottom
Height (Metric): 32 mm

Original Place: Zhejiang, China
Brand: Aijiren
Size: 11.6*32mm（with Write-on Spot）
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples.

9mm Short Thread Vial with integrated 0.3ml Micro-Insert, 32 x 11.6mm, Amber or clear glass, 1st hydrolytic class, label and filling lines, 100/pk
Aijiren 9mm glass vial with fused insert together eliminates movement of the insert. The fused insert also eliminates concerns about contaminants around the fused seam/space between the neck of the vial and the insert. Vials without graduation, all micro inserts are clear glass. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples.

Vial Size: 12 x 32 mm
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL

Aijiren is the leading supplier of chromatography consumables, can offer hplc vials,hplc syringe filter, EPA VOA vials, and some other test tubes.
Any requirement for chromatography consumables, please contact us.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

Materials of construction: pp chamber, PP plunger outer housing, borosilicate glass plunger inner storage vial, silicone septa with PTFE liner, PP cap
Vial Size: 12 x 32 mm
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL
Maximum operating temperature: 122°F (50°C)
Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample

32*12 mm, 2ml, screw neck, It is dimensionally equivalent to 11mm crimp top vials and 10-425 screw vials. The 9mm screw vials can be used in any autosampler which used 11mm crimp top vials and 10-425 screw vials. Compared to 11mm crimp top type, the 9mm screw one can be much applied as hand removing convenient.

No 2ml 9mm HPLC Vial is placed in inventory without passing cleanliness and performance testing for consistency resulting in a certified, 100% defect-free vial you can trust.
Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)

Short Thread Bonded Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; Adhesive-free bonding process, without the introduction of adhesive, the septum retains the excellent resilience performance of silicone rubber or silicone, softer than the septum of the adhesive process, which can provide better needles for the autosampler. protection of. Strict production management ensures product quality. The Bonded Caps with Septa are clean and ready to use without cleaning.

Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)

Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Packing: 100pcs/pk
For Use With (Application): GC, HPLC
Usage: Laboratory Analysis
Logo: Customized Accepted

Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Sample: Free
Payment: 100% T/T in advance
Certificate: ISO9001:2015

9mm Screw conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm.
High quality glass vial for HPLC/GC analysis. 0.3 ml clear glass micro insert fixed in 2ml glass vial. Conical base insert vial can saving samples while during injection. wide opening top for better needle injection. 2ml clear glass vial with 0.3ml intergrated vial, designed for valuable samples to save for testing use volum. Bottom fixed micro insert to keep the vial central vertical

Founded in 2007, Zhejiang Aijiren, Inc.15 years export experience, exprot to more than 70 countries, 2000+ customs around the world; IS0, GMP & Bureau Veritas certificated, this is how we keep good quality and competitive prices for global valued customers.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw

9mm threaded vials are designed for use with Agilent and other rotary or robotic arm samplers. Sample vials are made of high-quality borosilicate glass or first-grade hydrolyzed glass. The cap is made of high-quality polypropylene. Our septa use only the highest quality materials to ensure proper function and can be pre-cut for easier needle insertion. Available in amber and clear colors, amber glass vials are ideal for storing light-sensitive samples. Clear glass vials are ideal for testing the solubility or dispersion of materials, allowing you to view the solution unobstructed.

Aijiren 9MM hplc vials offer the lowest ion content possible to reduce sample loss and contamination.
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

Our 9 mm Wide Mouth Vials and Closures are our recommended screw thread vials. These vials are autosampler compatible and offer a 40% larger opening than 8-425 thread vials, simplifying pipetting and other routine functions. Aijiren Tech offers 9 mm screw thread vials in clear and amber glass, as well as polymeric options and mass spec quality glass.

This type of glass has a borosilicate structure. It is ideal for containing all injectable preparations with acid, neutral and alkaline pH. It also has good resistance to thermal shocks and can be sterilized before or after filling.
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap

Vial Material: First grade hydrolyzed glass, Borosilicate glass

Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

2ml autosampler vials 9mm for HPLC system with bonded septa caps. Including: 100pcs Clear/amber bottles 32×11.6mm made of borosilicate glass, 2ml lab vials 9-425 screw thread, Flat base Sample Vials; Made out of USP TYPE I Glass. With writing patch for pencil mark.

Materials of construction: pp chamber, PP plunger outer housing, borosilicate glass plunger inner storage vial, silicone septa with PTFE liner, PP cap
Vial Size: 12 x 32 mm
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL

Aijiren clear glass vial inserts, polypropylene vial inserts, and high recovery vials ensure you extract the maximum possible amount of your precious sample.
Material: Borosilicate Glass
Working Volume (mL): 0.3mL
Working Volume (μL): 300 μL
Bottom: Flat
Insert: Conical, base bonded, integrated insert

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

Volume: 1.5-2.0ml
Dimension: 12x32mm
Color: Amber and Clear
Neck: Screw neck
Neck Diameter: 9mm
Material: Brosilicate Glass/1st hydrolytic class glass
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Insert: 250ul/300ul

Aijiren offers proven autosampler vials and consumables for the chromatographer. The standard opening 2ml clear hplc vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.
Size:12*32mm
Classification: Laboratory Bottle
Application: For Autosampler
Material: Borosilicate Glass
Place of Origin: Zhejiang, China

Polypropylene as a vial material is a good choice for protein analysis because normal borosilicate glass vials are known to absorb some types of analytes such as proteins, peptides, and amines.
Insert Volume: 0.3ml
Vial Thread: Screw
Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Usage: Laboratory Analysis
Packing: 100pcs/pk

9mm 2ml Short Tread Glass HPLC Autosampler Vials have two different materials, one is borosilicate glass, and the other is imported first-grade hydrolytic glass, which can meet the different needs of customers; The 2mL Amber Screw Top Autosampler Vials are made from high-quality amber glass, providing excellent protection against light and UV radiation. The amber color helps to preserve the integrity of light-sensitive samples during storage or analysis. Amber glass vials are perfect for storing samples that are sensitive to light exposure. Clear glass vials are great for testing the solubility or dispersibility of materials, allowing you an unhindered view of the solution.

Aijiren 9mm high recovery screw vial is made of borosilicate class, so it has a good Liner coefficient. In the chromatography analysis field, 9mm high recovery screw vials are widely used in Life science and technology, Environmental Protection, and Food Safety. Smooth, conical interior surfaces facilitate complete sample recovery. high recovery vials offer precision vials made from low expansion borosilicate glass and designed with a unique interior bottom, solid glass bottom of a Microliter-Vial with an inner cone, allowing for maximum retrieval of contents by a syringe. These high-quality 9mm clear glass vials are 2mL, 12x32mm, and fit most brands of autosamplers. Made of superior quality borosilicate clear, they meet all requirements of US, EU, and JPN Pharmacopia.

9mm screw thread vials are designed especially for use with Agilent’s and other rotating or robotic arm samplers 2ml, 12X32mm vials are manufactured of borosilicate glass and include a write-in patch for sample identification.

Material is Brosilicate Glass/1st hydrolytic class glass. 100pcs packed in one box. Available in clear and amber.

Polypropylene is chemically resistant and the material of choice for pH sensitive samples, sodium or heavy metal analyses.
The PP vials are ideal when working with pH sensitive samples, aqueous samples in pharmaceutical applications, or undertaking sodium analysis.
If you’re analyzing anything that might adsorb into borosilicate glass, or looking to avoid sodium adducts pulled out of glass, these vials seem to do the trick. Using them on triple quad mass spec quite successfully.

Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the 2ml HPLC and GC Autosampler Vials.
Original Place: Zhejiang, China
Brand: Aijiren
Size: 11.6*32mm（with Write-on Spot）
Volume: 2ml Vial Diameter(mm):11.6±0.25
Performance: Acid Resistance, Alkali Resistance, Temperature Resistance

9 mm Wide Mouth Vials and Closures are our recommended screw thread vials. These vials are autosampler compatible and offer a 40% larger opening than 8-425 thread vials, simplifying pipetting and other routine functions. Amber glass vials are perfect for storing samples that are sensitive to light exposure. Clear glass vials are great for testing the solubility or dispersability of materials, allowing you an unhindered view of the solution.

Item: 250uL Micro Insert for 9mm HPLC Vials
Volume: 0.25ml
Color: Transparent
OEM: Available
Sample: Free
Certification: ISO9001:2015
Place of Origin: China (Mainland)
Compatibility: 2ml HPLC Vials
Polyspring inserts are self-aligning and provide a cushion against needle contact

9mm Screw conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm. High-quality glass vial for HPLC/GC analysis. 0.3 ml clear glass micro insert fixed in 2ml glass vials. 2ml clear glass vial with 0.3ml integrated vial, designed for valuable samples to save for testing use volume. Bottom fixed micro insert to keep the vial central vertical. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges. Standard vials for GC und HPLC.

Original Place: Zhejiang, China
Brand: Aijiren
Size: 11.6*32mm（with Write-on Spot）
Volume: 2ml Vial Diameter(mm):11.6±0.25
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

Materials of construction: pp chamber, PP plunger outer housing, borosilicate glass plunger inner storage vial, silicone septa with PTFE liner, PP cap
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL
Maximum operating temperature: 122°F (50°C)
Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample

Brand: Aijiren
Size: 11.6*32mm（with Write-on Spot）
Volume: 2ml Vial Diameter(mm):11.6±0.25
Vial Height(mm): 32±0.3
Mouth Diameter(mm):6.15±0.15
Quantity: 100 vials & 100 caps

1.5ml Glass High Recovery Vial,12 dia x 32 mm H, Clear or Amber, Solid Glass, Large Opening Style, High Recovery, 9 mm Neck Finish, One Piece Conical Design Allowing Complete Sample Recovery
High Recovery Vial to minimize adsorption of polar compounds, including amino acids, proteins, and phenols to the inner surface of the vial. High-recovery vials deliver high sample capacity with very low residual volume. Use total-recovery vials for maximum sample recovery. These high-quality 9mm clear glass vials are 2mL, 12x32mm, and fit most brands of autosamplers. Made of superior quality borosilicate clear, they meet all requirements of US, EU, JPN Pharmacopia

The dimensions for 12x32mm vials are standard between manufacturers but the length of the neck and width/shape of the vial shoulder may vary. 12x32mm microvials have the same outer dimensions but the inside of the vial may be tapered to reduce volume or contain a fused insert. 12x32mm high recovery vials will have an internal conical bottom.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)

9mm 2ml Wide Opening Screw Vials. 9mm screw thread caps, septa, and vials are designed especially for use with Agilent’s and other rotating or robotic arm samplers 2ml, 12X32mm vials are manufactured of Clear. type 1 Class A or Amber, Type 1 Class B borosilicate glass and include a write-in patch for sample identification.