9mm Short Thread Caps with Septa

Materials of construction: pp chamber, PP plunger outer housing, borosilicate glass plunger inner storage vial, silicone septa with PTFE liner, PP cap
Vial Size: 12 x 32 mm
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL
Maximum operating temperature: 122°F (50°C)
Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance. A headspace vial is used in the process of GC  chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial. The material of Headspace Vials is low extractable Borosilicate glass with a low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance, and high chemical stability. Headspace Vials are suitable for headspace analysis of volatile solids and gases.

2ml Clear HPLC Screw Vials are preferentially used on instruments of the following manufacturers: Jasco, Perkin Elmer, Shimadzu, Varian, Waters, etc., or General Storage. Factory Directly Supply 2ml Clear HPLC Screw Vials over 15 Years Exporting Experience.

Economical and convenient storage for samples of your hplc vials rack. PVC rack features a clear see-through lid. All hplc vials rack feature alphanumeric indexing for easy tracking of samples.
Color: Blue
Suitable: 2ml Vials
Racks feature alphanumeric indexing for easier vial identification.
Racks can be stacked for efficient storage.
Fits most 2.0 mL, 11.6 x 32 mm vials (vials sold separately).

2ml Amber Screw HPLC Vials are a better choice used for most HPLC and LC-MS applications.2ml Amber Screw HPLC Vials can be made from a different coefficient of expansion glass; most notable 33-expansion and 51-expansion glass.

There are some lab autosampler vial, these glass autosampler vials are hot sale in recently. 4ml screw autosampler vial, 9mm screw glass sample vial and ND11 crimp HPLC vial are also seen in chromatography laboratory. Most important, All of autosampler vial can be supplied in wholesale price. 1.5ml–4ml autosampler vial for chromatography analysis are in stock. welcome to inquiry.

Aijiren offers proven autosampler vials and consumables for the chromatographer. The standard opening 2ml clear hplc vials have more threads per inch, so there is less likelihood that volatile solvents will evaporate over time.
Size:12*32mm
Classification: Laboratory Bottle
Application: For Autosampler
Material: Borosilicate Glass
Place of Origin: Zhejiang, China

8-425 polypropylene screw finished cap with PTFE and silicone septa for chromatography autosampler vial, this screw cap can supply solid and hollow. Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Screw cap are available in 8-425 screw cap, 9mm screw cap, 10-425 cap, 13-425 cap and 24-400 cap.

Main applications for Plastic vials are atomic absorption, water and protein analysis, capillary electrophoresis, ion chromatography etc.
Optimal choice when working with proteins. Ideal for IC applications

8-425 screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

9mm screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Sample storage vials, also known as chemical glass storage bottles, sub-packaging bottles, are suitable for the sub-packaging of various pharmaceutical intermediates, high value-added chemicals, biological preparations, cosmetics, cosmetics, essential oils and other products, suitable for long-term storage and transportation of products , Has excellent sealing performance.

Aijiren polypropylene snap ring micro vials can be used with most standard GC and LC autosamplers. These lightweight, economical vials are made from durable polypropylene with good chemical resistance. The tapered interior ensures maximum collection of contents without the hassle of removable inserts. With body size of 12*32mm makes it compatible with most autosamplers such as Agilent, Varian, etc. Snap/crimp top compatible with caps that are used with 11mm snap ring vial and crimp neck vial ND11.

The 20mm 20ml Crimp Top Headspace vial has a 20mm outer diameter, which is the standard size for crimp-style headspace vials. The 20ml capacity refers to the volume of the vial, meaning it can hold up to 20 milliliters of liquid or gas sample. These vials are typically made from high-quality borosilicate glass. Borosilicate glass is chosen because it is resistant to chemical reactions and can withstand high temperatures, making it ideal for containing volatile samples without contamination. A headspace vial is used in the process of top – gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial.

Vial Dimension: 12x32mm
Vial Material: Borosilicate Glass/Glass Type 1
Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Pack:Vials:100 Pieces with Heat-shrinkable plastic box+Carton
Cap&Septa:100pieces/Bag+Carton

9mm Screw conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm. High-quality glass vial for HPLC/GC analysis. 0.3 ml clear glass micro insert fixed in 2ml glass vials. 2ml clear glass vial with 0.3ml integrated vial, designed for valuable samples to save for testing use volume. Bottom fixed micro insert to keep the vial central vertical. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges. Standard vials for GC und HPLC.

China High Quality 9mm Short Thread Caps with Septa for 10-425 thread vial Manufacturer

Aluminum crimp seals with pre-fitted septa crimp top and snap cap vials. Crimp top vials provide an excellent seal for long-term sample storage and analyses involving high volatile solvents.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted

Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

Preassembled polypropylene snap-top closures with a 6mm center hole, including  PTFE/silicone septa. To use with 11mm snap-top vials. Snap caps provide a secure seal, minimizing evaporation even with volatile samples. Snap ring closures N11 should only be used in HPLC, as the punctual compacting pressure of the septum against the vial rim by the four pins in the cap does not achieve the same level of tightness as the evenly applied pressure through a screw thread or by crimping.

Fused-insert sample vials work with both snap caps and crimp caps. These small samples fused-insert vials work with both snap caps and crimp caps. 11mm Glass Crimp Neck Vials with Fused Inserts are ideal for handling small-volume samples while delivering low residual volume. 11mm Glass Crimp Neck Vials with Fused Inserts offers the simplicity and functionality of typical micro vials at a fraction of the cost. 0.3 ml clear glass micro insert fixed in 2 ml glass vial. Bottom fixed micro insert to keep the vial central vertical. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges.

Laboratory 15mm Black Screw PP Cap ,9mm Center Hole,Closed-Top with PTFE Silicone Septa for 15-425 vials.Screw thread cap & septa that’s ideal for general laboratory use and storage of samples.

1.Micro-volume “Drop-In” Inserts for use with Standard 9-425 (9mm) Mouth HPLC Vials.
2.Compatible with all 2ml Screw HPLC Vials, 9mm Thread
3.Center automatically with a flat bottom and mandrel interior
4.Type I borosilicate glass

2ML Autosampler Vials are ubiquitous in analytical laboratories and vendors have developed many varieties to meet the various needs of scientists.
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers

The crimp cover of the jaws is made of aluminum for crimping and sealing. Suitable for 20mm Crimp Top Headspace Vials.

15-425 Screw Sample Storage vials also named sample vials, are used in the package of biological agents, cosmetics, high-value chemistry and so on. Storage vials are suitable for the packaging of various pharmaceutical intermediates, high-value-added chemicals, chemical reagents, biological reagents, cosmetics, essential oils, etc. It is suitable for long-term storage and transportation for products and has excellent sealing performance. The “15-425” designation refers to the size and threading of the vial. It has a 15mm outer diameter. These vials are typically made from high-quality materials such as Borosilicate glass. 

Polypropylene vials are an economical alternative to glass for some applications. The vial is primarily constructed from high-quality, durable polypropylene or polymethyl pentene (PMP). This plastic is typically chosen for its chemical resistance, inertness, and transparency. Polypropylene is the most popular plastic material. Polypropylene vials have heat resistance of up to 135 degrees Celsius and are commonly used in chromatographic experiments. PMP has higher heat resistance – up to 175 degrees Celsius – and is transparent, increasing the sample’s visibility inside the sample bottle. The vial typically has a standard 9mm outer diameter, making it compatible with a wide range of autosampler systems commonly used in laboratories.

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

Vial Material: First grade hydrolyzed glass, Borosilicate glass

Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

2ml Amber Screw HPLC Vials are a better choice used for most HPLC and LC-MS applications.2ml Amber Screw HPLC Vials can be made from a different coefficient of expansion glass; most notable 33-expansion and 51-expansion glass.

For some applications Polypropylene HPLC Vials are not suitable due to their composition and their chemical properties. Amongst these are heavy metal analysis, water and protein analysis, atomic absorption, capillary electrophoresis (CE) and ion chromatography (IC). For all these cases high purity polypropylene vials with 0.3 mL, 0.7 mL and 1.5 ml in transparent and amber are available.

The 9mm screw vials are made of transparent Type 1 Class A or amber Type 1 Class B borosate glass. The 9mm screw vials are forged at high temperatures from borosilicate glass.

These 20mm Crimp Top Aluminum Caps are typically made of aluminum, which is a lightweight and corrosion-resistant metal. Aluminum provides excellent sealing properties, ensuring the integrity of the sample within the vial. The cap features a crimp top design, which means it can be securely attached to the vial by using a crimping tool. This process involves crimping the cap around the vial’s neck, creating a tight and tamper-evident seal. 20mm Crimp Top Aluminum Caps often come in various colors, which can help with sample identification, organization, or differentiation of different products or solutions. The cap material is a metal aluminum cover. The design with a 9.5mm hole in the center of the cover can be used for headspace analysis. Standard GC and HPLC sample bottles can be used for autosampler and sample storage.

The main application for HPLC, autosampler, chromatography, Agilent, waters machine. All autosamplers of Ajiren Tech are 100% integrity tested and manufactured according to ISO 9001 standard. If a 2ml screw HPLC vialsis required. Please contact Ajiren.

Aijiren is the largest chromatography consumable manufacturer in south of China. There are HPLC vial, GC vial, Septum and closures, EPA vial, TOC vial, Test tube, Reagent bottle and Syringe filter in Aijiren shop. You can get all the consumables in wholesale price. Please choose your needed in precise catalog.

The Aijiren 2ml clear screw HPLC vials Certified Vial Convenience Kit (Opening 9mm) is full lot tested in multiple ways for 15 critical parameters. Aijiren’s 2ml clear screw hplc vials for autosampler is usually divided into three types of calibers.

11mm crimp top vials have a volume of 0.3mL and provide an excellent seal for long term sample storage and analyses involving high volatile solvents. Standard vials for GC and HPLC applications.2ml clear glass vial with 0.3ml integrated vial, designed for valuable samples to save for testing use volume. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges. The highest quality ISO9001:2015 certification in the industry ensures the most accurate analysis of samples.

The vial has an outer diameter of 9mm and is designed especially for use with Agilent’s and other rotating or robotic arm samplers. The vial features a short thread design with threads on the neck of the vial. This design allows for a secure and reliable closure when used with compatible screw caps or septa. Caps are made of high-quality polypropylene to exact manufacturing tolerances and lined in a controlled manufacturing environment. Available cap colors include yellow, red, green, and blue. Our septa use only the highest quality PTFE and silicone to ensure proper function and can be pre-slit to ease needle penetration. Designed for single injection and/or short sample cycles, particularly for LC applications. The absence of an elastomer layer reduces the potential for contamination.

Aijiren 11mm polypropylene snap micro vials can be used in most standard gas and liquid chromatography autosamplers. Universally usable vials for almost all autosamplers, even those with robotic handling. Vials can also be crimped with a standard 11mm Aluminum Crimp Seal. The conical interior ensures maximum retrieval of contents without the hassle of using removable inserts. Plastic bottle with thinner penetration point, made of polyethylene, suitable for snap ring bottles and crimp top bottles ND11. Snap/Crimp Top Compatible with caps for use with 11mm PP Micro-Vial Snap Ring/Crimp.

2ml chromatography vials for HPLC. Aijiren’s 2ml chromatography vials have customized services such as the color of the pp cap, whether the vial has tick marks and label areas, and whether the customer’s brand logo is printed.

These 2ml Screw Top Plastic Autosampler Vials are made to consistent quality standards and are an excellent choice for ion Chromatography, CE, Bio-analysis, or General Chromatography when organic solvents are not needed. Minimized ionic interactions and adsorption with vial walls provide consistent results for proteins and peptides. 2ml screw top plastic autosampler vials are made of high-quality GC-tested polypropylene material. Polypropylene vials are chemically inert and suitable for most chromatography experiments, the material of choice for pH-sensitive samples, and sodium or heavy metal analyses. Plastic bottles may be used over traditional glass bottles when the content of inorganic ions must be kept to an absolute minimum.

11mm Crimp Top Autosampler Vial for GC and HPLC. Vials have a 40% larger opening than standard opening aluminum seal vials, manufactured of Clear or Amber borosilicate glass. The standard 12x32mm profile is compatible with 11mm aluminum seal closures. The precision-shaped bottleneck can improve the processing capacity of the autosampler. In order to ensure good function, it can be slit in advance to facilitate needle penetration, designed for single injection or short sampling cycle, and especially suitable for liquid chromatography. 

Materials of construction: pp chamber, PP plunger outer housing, borosilicate glass plunger inner storage vial, silicone septa with PTFE liner, PP cap
Vial Size: 12 x 32 mm
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL
Maximum operating temperature: 122°F (50°C)
Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample

All chromatography vials produced by Aijiren are made of boronic acid glass. Aijiren’s chromatography vials are always the main product. If you are interested, please contact online customer service.

China High Quality 9mm Short Thread Caps with Septa for 10-425 thread vial Manufacturer

2ml Amber Screw HPLC Vials, caps, septa, and inserts working as a whole to prevent sample degradation and loss of samples caused by evaporation. Screw thread closures N9 (9mm) 2ml vials and closures are universally suitable on most autosamplers, convenient in handling and available in a broad selection of different cap colors and septum materials.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.
Aijiren 10mm 2ml hplc autosampler vial is generally made of the high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert. the wide mouth of 10-425 vials can get a larger injection range, so this kind of bottle is often used to repeatedly clean the residual solution on the automatic injection needle.

The 2ml 10mm clear HPLC vials can be suitably employed to inject samples from an autosampler. They come in a variety of sizes, 2ml 10mm clear HPLC vials being ubiquitously used.
Vial Volume: 1.5-2.0ml
Clear: Amber and Clear
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

Aijiren pp caps for 2ml 9-425 screw-top vials with caps lined with PTFE/Silicone septa are used in chromatography analysis, it can be used in HPLC/GC Application.
Size: 9mm
Cap Material: PP
Color: Blue or Customized
Application: For 2ml 9-425 Screw Top Vials
Matching Brands: Waters, Varian, Shimadzu etc

Aijiren High quality ND8 Screw Caps with Septa Manufacturer. Aijiren has own R&D Center and Quality Controll Center to keep products in high quality. All materials are produced at 100,000 grade clean room.

Vial Dimension: 12x32mm
Vial Volume: 1.5-2.0ml
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers

The 11mm snap-top caps are made of high-quality polypropylene. The caps have a roll-edge or snap-on shape. The snap-top caps provide a secure seal that minimizes evaporation even for volatile samples.

20mm crimp headspace vial is widely used in Headspace and GC, GCMS application.

9mm screw thread vials are designed especially for use with Agilent’s and other rotating or robotic arm samplers 2ml, 12X32mm vials are manufactured of borosilicate glass and include a write-in patch for sample identification.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

Aijiren 10mL certified screw and crimp style, clear or amber glass headspace vials. These 10ml Headspace GC Vials come in both flat- and round bottom styles for use in a wide variety of headspace instrument platforms.

The 9mm HPLC Autosampler Vial is the most widely used. Support OEM customization, customized logo, customized packaging

Preassembled polypropylene snap-top closures with a 6mm center hole, including  PTFE/silicone septa. To use with 11mm snap-top vials. Snap caps provide a secure seal, minimizing evaporation even with volatile samples. Snap ring closures N11 should only be used in HPLC, as the punctual compacting pressure of the septum against the vial rim by the four pins in the cap does not achieve the same level of tightness as the evenly applied pressure through a screw thread or by crimping.

Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

Advances in glass vial manufacturing now produce the type of threads that are needed to properly seal the vial and cap under pressure, producing a Screw Top Headspace System that works well together.
Sample: Provided Freely
Packing: 100pcs/pk
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Brand: Aijiren Tech

2ml Clear Screw HPLC Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. 2ml Clear Screw HPLC Vial’caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly.

2ml Clear HPLC Screw Vials are preferentially used on instruments of the following manufacturers: Jasco, Perkin Elmer, Shimadzu, Varian, Waters, etc., or General Storage. Factory Directly Supply 2ml Clear HPLC Screw Vials over 15 Years Exporting Experience.

The Aijiren hand crimper provides a consistent and dependable seal that allows secure vial closure each and every time. Hand-operated with adjustable stop,  There is a jaw pressure regulator on the operating handle and, Cushion grip for user comfort. The high-quality construction is engineered for durability and long life to provide a smooth and simple operation. tough jaws with a special metal alloy, to ensure long-term use. The adjustable hand crimper is ideal if you use varying thicknesses of septa in your analysis. This product has the ability to be adjusted for changes in septa thickness. The height of the cover is adjustable, through the bolt on the jaw head, with hexagonal. 

Economical and convenient storage for samples of your hplc vials rack. PVC rack features a clear see-through lid. All hplc vials rack feature alphanumeric indexing for easy tracking of samples.
Color: Blue
Suitable: 2ml Vials
Racks feature alphanumeric indexing for easier vial identification.
Racks can be stacked for efficient storage.
Fits most 2.0 mL, 11.6 x 32 mm vials (vials sold separately).

Autoclavable: Max 120℃ for bottles
140℃ for caps when autoclaving
Available Volume :50ml to 2000ml
Feature: durable, reusable, environmentally friendly
Using: Glass bottles fit for storing chemicals, liquids, powders, biologicals, and other liquid solutions for lab

There are glass vials and plastic vials to choose from, and different materials can be selected for different scenes.

2.0ml 10-425 Screw Vials ND10 can be used for GC and HPLC. Wide opening enables easy filling with viscous materials. HPLC Autosampler Vials are cleaned and packaged in a certified Class 100000 clean room according to a designed process, developed to eliminate chromatographic errors associated with vials. Critical physical dimensions are fully tested, as well as chemical cleanliness testing to ensure that trace levels of residues are not present.
Aijiren 10mm 2ml HPLC autosampler vial is generally made of high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert.

Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Payment: 100% T/T in advance

Aijiren’s exclusive adhesive-free bonding process does not require the introduction of adhesives. The septum retains the excellent resilience properties of silicone rubber or silicone. It is softer than the septum of the bonding process and is convenient for the needle of the autosampler Better penetration.

2 mL Standard Opening Vials from Aijiren. Our standard 2 mL vial is 12 mm in diameter, 32 mm in height, and has a 4.6 mm opening.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

Aijiren polypropylene snap micro vials can be used in most standard gas and liquid chromatography autosamplers. These lightweight, economical vials are made from durable polypropylene which has good chemical resistance. The conical interior ensures maximum retrieval of contents without the hassle of using removable inserts. A body size of 12*32mm makes it compatible with most autosamplers such as Agilent, Varian, etc. Snap/crimp top compatible with caps that are used with 11mm snap ring vial and crimp neck vial ND11. PP Micro Vial with one of our seals can be obtained as a 2in1 KIT Special Push-On Cap with a thinner penetration point made of Polyethylene for Snap Ring Vials and Crimp Neck Vials ND11.

Founded in 2007, Zhejiang Aijiren, Inc.15 years export experience, exprot to more than 70 countries, 2000+ customs around the world; IS0, GMP & Bureau Veritas certificated, this is how we keep good quality and competitive prices for global valued customers.

Snap Cap Vials are an extension of the crimp cap system of sealing. A plastic cap is stretched over the rim of the vial to form a seal by squeezing the septum between the glass and the stretched plastic cap. Plastic has memory and wants to return to the original dimension. This tension in the cap to return to its original size is the force forming the seal between glass, cap and septum. The advantage of a plastic snap cap is no tools are required to assemble. The snap-top cap is a compromise sealing system.

Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

These polypropylene caps have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, and household oils. Polypropylene Hole Caps are known for good impact strength, cost effectiveness, and pliability.

Chromatography septas can be pre-slit. A pre-slit septum is an ideal choice in applications requiring 20% or more of the sample injection each time from the vial so that suction is avoided. The slit allows ambient gas to equalize the gas in the vial so that a vacuum is not created in the vial from the tight seal around the needle. If coring or clogging from a narrow needle or needle deflection from highly durable septa material is a concern, then choosing a pre-slit septum is a better choice.
A PTFE/Silicone with a slitted septum allows for easier needle penetration as well as to release the vacuum that forms when a large volume of sample is withdrawn from a vial. This septum provides chromatographic characteristics similar to that of a septum without a slit except that the ability to withstand exposure to aggressive solvents is slightly lessened. Pre-slit septa are highly recommended for improving injection-to-injection reproducibility with autosamplers withdrawing greater than 50µL of sample from a 2mL vial, due to possible cavitation (vacuum).

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples. High recovery vials offer precision vials made from low expansion borosilicate glass and are designed with a unique interior bottom, solid glass bottom of a Microliter-Vial with an inner cone, allowing for maximum retrieval of contents by a syringe. High Recovery Vials Reduce Residual Product Waste by 99%. high recovery vials are optimal for manual and automated compound or biological sample applications.

Aijiren 11mm snap ring vials have a volume of 1.5mL and eliminate the need for crimpers or decapping tools. Recommended for HPLC applications only. Snap ring vials eliminate the need for crimping and decapping tools. 40% larger opening improves sample accessibility and reduces the risk of autosampler needle damage. Optional white ceramic writing patch and fill marks for easy labeling. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short-term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

Aijiren screw thread top sample vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible.The 1.5ml sample vial we usually say is the 2ml volume sample vial.

There are many differences between butyl and natural rubber. Butyl rubber is a synthetic elastomer known for its excellent sealing properties, chemical resistance, and flexibility. The product also has low air permeability, good airtightness, and good resistance. Ozone resistance, chemical resistance, electrical insulation, flexibility resistance, heat aging resistance, energy absorption, and other characteristics.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw

The 2ml chromatography vial is forged at high temperatures from borosilicate glass. The Aijiren Scientific 2ml chromatography vial Certified Vial Convenience Kit (Opening 9mm) is fully lot tested in multiple ways for 15 critical parameters.

The classification of HPLC autosampler vials is generally done based on the diameter of the vial body, vial height, and thread finish.Our 2ml Screw HPLC Vials are the perfect fit for HPLC and GC instrument platforms across a wide variety of applications.

Fused-insert sample vials work with both snap caps and crimp caps. These small samples fused-insert vials work with both snap caps and crimp caps. 11mm Glass Crimp Neck Vials with Fused Inserts are ideal for handling small-volume samples while delivering low residual volume. 11mm Glass Crimp Neck Vials with Fused Inserts offers the simplicity and functionality of typical micro vials at a fraction of the cost. 0.3 ml clear glass micro insert fixed in 2 ml glass vial. Bottom fixed micro insert to keep the vial central vertical. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges.

Aijiren has own R&D Center and Quality Controll Center to keep products in high quality. All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the 2ml HPLC and GC Autosampler Vials.
Original Place: Zhejiang, China
Brand: Aijiren
Size: 11.6*32mm（with Write-on Spot）
Volume: 2ml Vial Diameter(mm):11.6±0.25
Performance: Acid Resistance, Alkali Resistance, Temperature Resistance

Browse 2ml 10mm autosampler vials and vial inserts in various sizes and closures with and without septa, including snap, screw, or crimp top vial closure options.Aijiren is the leading supplier of 2ml 10mm autosampler vials since 2007.
Vial Dimension: 11.6*32mm
Vial Volume: 1.5-2.0ml
Vial Thread: Screw
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis

PTFE/Silicone septa are most popular for HPLC applications, and Pre-slit septa are easier to pierce with needles.
Usually, the cap color is clear or blue, other special colors can be also produced accordingly.

Septa Material: PTFE/Silicone (White)
Usage: 20ml Headspace Vials
Production Capacity: 50000000PCS/Week
Specification: 100pcs/pack
Trademark:Aijiren
Origin: China

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

Suitable: 20mm Crimp Top Headspace Vials
Caps Material: Magnetic Aluminum
Septa Material: PTFE/Silicone; PTFE/butyl

A headspace vial is used in the process of top – gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial.

9mm screw thread vials are designed especially for use with Agilent’s and other rotating or robotic arm samplers 2ml, 12X32mm vials are manufactured of borosilicate glass and include a write-in patch for sample identification.

Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septum is non-toxic; the glue-free bonding process does not require the introduction of adhesives, and the septum retains the excellent resilience performance of silicone rubber or silicone, which is better than the glue-based process The septa are softer.

The 8-425 vial has an outer diameter of 8mm, which is a common size for HPLC autosampler systems. This standard size ensures compatibility with a wide range of autosamplers and other accessories. These vials are typically made from high-quality, Borosilicate Glass or 1st hydrolytic-class glass to prevent interactions between the sample and the container. Aijiren screw thread top sample vial design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.