2ml 10mm hplc vials rack for sale

The vial has an outer diameter of 9mm and is designed especially for use with Agilent’s and other rotating or robotic arm samplers. The vial features a short thread design with threads on the neck of the vial. This design allows for a secure and reliable closure when used with compatible screw caps or septa. Caps are made of high-quality polypropylene to exact manufacturing tolerances and lined in a controlled manufacturing environment. Available cap colors include yellow, red, green, and blue. Our septa use only the highest quality PTFE and silicone to ensure proper function and can be pre-slit to ease needle penetration. Designed for single injection and/or short sample cycles, particularly for LC applications. The absence of an elastomer layer reduces the potential for contamination.

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples. High recovery vials offer precision vials made from low expansion borosilicate glass and are designed with a unique interior bottom, solid glass bottom of a Microliter-Vial with an inner cone, allowing for maximum retrieval of contents by a syringe. High Recovery Vials Reduce Residual Product Waste by 99%. high recovery vials are optimal for manual and automated compound or biological sample applications.

Material is Brosilicate Glass/1st hydrolytic class glass. 100pcs packed in one box. Available in clear and amber.

The butyl rubber stopper is an off-white rubber-like solid with a density of 0.92g/cm3. It is odorless, insoluble in water, and soluble in hexane and chloroform. The product also has low air permeability, good airtightness, and good resistance. Ozone resistance, chemical resistance, electrical insulation, flexibility resistance, heat aging resistance, energy absorption and other characteristics.

Aijiren COD Test Tube is made of borosilicate glass, which can reduce pH changes and pollutants that may be leached from soda lime glass. The glass digestion test tube can be used for analysis at temperatures higher than 130 degrees Celsius. It is manufactured from laboratory storage for a variety of general purposes and can hold almost anything. The SEPTA is made of PTFE silicon rubber gasket, which has a strong sealing performance and can resist various chemical corrosion. Used for municipal wastewater testing; industrial wastewater and process control testing; and environmental water testing. The used COD Tubetests contain strong sulfuric acid and other chemicals, so reagents must be handled carefully. The contents of the pipe should be disposed of in accordance with the requirements of local authorities.

Autosampler needle pierces through the cap during injection and withdraws the required aliquots of sample from the 2ml HPLC and GC Autosampler Vials.
Original Place: Zhejiang, China
Brand: Aijiren
Size: 11.6*32mm（with Write-on Spot）
Volume: 2ml Vial Diameter(mm):11.6±0.25
Performance: Acid Resistance, Alkali Resistance, Temperature Resistance

Aijiren COD Test Tube is made of borosilicate glass, which can reduce pH changes and pollutants that may be leached from soda lime glass.  The glass digestion test tube can be used for analysis at temperatures higher than 130 degrees Celsius.  It is manufactured from laboratory storage for a variety of general purposes and can hold almost anything. The COD Test Tube is small in size and light in weight. The used COD Tubetests contain strong sulfuric acid and other chemicals, so reagents must be handled carefully. 

Snap Cap Vials are an extension of the crimp cap system of sealing. A plastic cap is stretched over the rim of the vial to form a seal by squeezing the septum between the glass and the stretched plastic cap. Plastic has memory and wants to return to the original dimension

2ml chromatography vials for HPLC. Aijiren’s 2ml chromatography vials have customized services such as the color of the pp cap, whether the vial has tick marks and label areas, and whether the customer’s brand logo is printed.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

These polypropylene caps have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, and household oils. Polypropylene Hole Caps are known for good impact strength, cost effectiveness, and pliability. Septa sold separately.Polypropylene hole caps are available preassembled with separate septa or without septa. We also feature polypropylene hole closures with bonded septa to provide assurance that the septa will not slip away from the cap while injecting.

These standard opening 2ml HPLC Vials with Caps have a narrow opening that can be used with a 9-425mm cap and a septum.So if you are interested in 2ml 9mm HPLC Vial, please contact us right NOW.

Aluminum crimp-top cap, 5.5mm center hole, 11mm diameter, with pre-slit white PTFE/red silicone septa, 100/pk. Aijiren 11mm Crimp Top Caps with Septa can squeeze the septa between the rim of the crimp vials and the folded aluminum cap. The crimp cap has a good sealing effect and can effectively prevent the sample from evaporating. In addition, this type of bottle cap can keep the position of the septum unchanged when the autosampler is used for puncture sampling of the sample. High quality and performance, the septa and cap for crimp top sample vials are welcomed by more and more clients around the world.

Usage: Laboratory Analysis
Logo: Customized Accepted
Trademark: Aijiren
Origin: China
OEM: Available
Sample: Provided Freely

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance. A headspace vial is used in the process of GC  chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial. The material of Headspace Vials is low extractable Borosilicate glass with a low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance, and high chemical stability. Headspace Vials are suitable for headspace analysis of volatile solids and gases.

Suitable: 20mm Crimp Top Headspace Vials
Caps Material: Magnetic Aluminum
Septa Material: PTFE/Silicone; PTFE/butyl

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

11mm snap top autosampler vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Our 9mm autosampler vials are available in both amber and clear. The associated 9mm autosampler vials caps and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
Product Name: China supplier 9mm autosampler vials for sale
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Custom Order: Accept

These glass vials are used in the environmental industry. Available in Flat bottom.
Clear. Type 1, Borosilicate, 33 Expansion. Also available in Amber, 51 Expansion.
Various sizes and capacities are available. Caps are sold separately.
(24-414 finish available by special order).

15-425 black screw pp cap has a 15mm outer diameter, which means it is compatible with vials that have a corresponding neck size and threading. These caps are typically made from high-quality materials such as polypropylene. These polypropylene caps have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, and household oils. Polypropylene Hole Caps are known for good impact strength, cost-effectiveness, and pliability.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

9mm Short Thread Vial with integrated 0.3ml Micro-Insert, 32 x 11.6mm, Amber or clear glass, 1st hydrolytic class, label and filling lines, 100/pk
Aijiren 9mm glass vial with fused insert together eliminates movement of the insert. The fused insert also eliminates concerns about contaminants around the fused seam/space between the neck of the vial and the insert. Vials without graduation, all micro inserts are clear glass. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples.

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples. High recovery vials offer precision vials made from low expansion borosilicate glass and are designed with a unique interior bottom, solid glass bottom of a Microliter-Vial with an inner cone, allowing for maximum retrieval of contents by a syringe. High Recovery Vials Reduce Residual Product Waste by 99%. high recovery vials are optimal for manual and automated compound or biological sample applications.

Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted

Materials of construction: pp chamber, PP plunger outer housing, borosilicate glass plunger inner storage vial, silicone septa with PTFE liner, PP cap
Vial Size: 12 x 32 mm
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL
Maximum operating temperature: 122°F (50°C)
Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample

Aluminum crimp-top cap, 5.5mm center hole, 11mm diameter, with pre-slit white PTFE/red silicone septa, 100/pk. Aijiren 11mm Crimp Top Caps with Septa can squeeze the septa between the rim of the crimp vials and the folded aluminum cap. The crimp cap has a good sealing effect and can effectively prevent the sample from evaporating. In addition, this type of bottle cap can keep the position of the septum unchanged when the autosampler is used for puncture sampling of the sample. High quality and performance, the septa and cap for crimp top sample vials are welcomed by more and more clients around the world.

11mm Crimp Top Autosampler Vial for GC and HPLC. Vials have a 40% larger opening than standard opening aluminum seal vials, manufactured of Clear or Amber borosilicate glass. The standard 12x32mm profile is compatible with 11mm aluminum seal closures. The precision-shaped bottleneck can improve the processing capacity of the autosampler. In order to ensure good function, it can be slit in advance to facilitate needle penetration, designed for single injection or short sampling cycle, and especially suitable for liquid chromatography. 

Crimp caps squeeze the membrane between the edge of the glass bottle and the crimped aluminum cap. This creates a good seal and prevents evaporation. Crimp cap vials require a hand crimper tool to perform the sealing process.

2ml Amber Screw HPLC Vials, caps, septa, and inserts working as a whole to prevent sample degradation and loss of samples caused by evaporation. Screw thread closures N9 (9mm) 2ml vials and closures are universally suitable on most autosamplers, convenient in handling and available in a broad selection of different cap colors and septum materials.

Our 9mm autosampler vials are available in both amber and clear. The associated 9mm autosampler vials caps and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
Product Name: China supplier 9mm autosampler vials for sale
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Custom Order: Accept

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

0.3 ml clear glass micro insert fixed in 2ml glass vial, designed for valuable samples to save for testing use volume

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples.

A 2ml snap autosampler vial is widely used in HPLC applications and can be used almost as universal sample vials for autosamplers, including sample vials with automatic operation. The vial features an 11mm snap ring closure, which provides a secure and leak-proof seal. These 2ml snap autosampler vials are recommended for short-term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal. Vials have a 40% larger opening than standard aluminum seal vials for easier sample filling and to reduce the chance of bent or broken needles during sampling. Compared with crimp top vials, snap vials can be capped and uncapped easily without tools, making it more convenient to use.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw

Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

Aijiren COD Test Tube is made of borosilicate glass, which can reduce pH changes and pollutants that may be leached from soda lime glass.  The glass digestion test tube can be used for analysis at temperatures higher than 130 degrees Celsius.  It is manufactured from laboratory storage for a variety of general purposes and can hold almost anything. The COD Test Tube is small in size and light in weight. The used COD Tubetests contain strong sulfuric acid and other chemicals, so reagents must be handled carefully. 

Crimp Vials squeeze the septum between the rim of the glass vial and the crimped aluminum cap. This forms an excellent seal preventing evaporation. The septum stays seated during piercing by the autosampler needle. The crimp cap vial requires crimping tools to carry out the sealing process. For low volume settings, manual crimper tools are the choice. For high volume settings, automated crimpers are available.

11mm Snap Top Caps are made of high quality polypropylene, Caps have the profile of a crimp or snap closure for compatibility with robotic autosamplers, Pre-assembled septa reduces the chance of contamination during sample preparation, while saving sample preparation time in the lab.Snap caps provide a secure seal, minimizing evaporation even with volatile samples, The audible click ensures that a secure seal has been formed and the cap is properly applied.

Snap Cap Vials are an extension of the crimp cap system of sealing. A plastic cap is stretched over the rim of the vial to form a seal by squeezing the septum between the glass and the stretched plastic cap. Plastic has memory and wants to return to the original dimension. This tension in the cap to return to its original size is the force forming the seal between glass, cap and septum. The advantage of a plastic snap cap is no tools are required to assemble. The snap-top cap is a compromise sealing system.

11mm snap top autosampler vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Here we describe a case where the type of Hplc Vials And Caps used results in an interesting phosphorous pseudorotation driven by the mild alkalinity of glass.
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml

These 2ml Screw Top Plastic Autosampler Vials are made to consistent quality standards and are an excellent choice for ion Chromatography, CE, Bio-analysis, or General Chromatography when organic solvents are not needed. Minimized ionic interactions and adsorption with vial walls provide consistent results for proteins and peptides. 2ml screw top plastic autosampler vials are made of high-quality GC-tested polypropylene material. Polypropylene vials are chemically inert and suitable for most chromatography experiments, the material of choice for pH-sensitive samples, and sodium or heavy metal analyses. Plastic bottles may be used over traditional glass bottles when the content of inorganic ions must be kept to an absolute minimum.

The Hand Decrimper is typically designed to work with two common crimp cap sizes, which are 11mm and 20mm. These sizes correspond to the diameter of the crimp caps, indicating their compatibility with specific vial sizes. This tool is typically made of durable materials such as stainless steel or high-quality aluminum. These materials are chosen for their strength and resistance to corrosion, ensuring long-lasting performance. The decrimping features a handle, often designed with ergonomic considerations for comfortable and efficient use by laboratory personnel. The handle provides a firm grip for precise control during the decrimping process.

The cap material is a metal aluminum cover.Standard GC and HPLC sample bottles can be used for autosampler and sample storage. There are two designs round bottom and flat bottom.The crimp cover of the vials is made of aluminum for crimping and sealing; plastic (polyethylene, polypropylene, or phenolic resin) for non-crimping and sealing.

Septa Material: PTFE/Silicone (White)
Usage: 20ml Headspace Vials
Production Capacity: 50000000PCS/Week
Specification: 100pcs/pack
Trademark:Aijiren
Origin: China

Aijiren polypropylene snap micro vials can be used in most standard gas and liquid chromatography autosamplers. These lightweight, economical vials are made from durable polypropylene which has good chemical resistance. The conical interior ensures maximum retrieval of contents without the hassle of using removable inserts. A body size of 12*32mm makes it compatible with most autosamplers such as Agilent, Varian, etc. Snap/crimp top compatible with caps that are used with 11mm snap ring vial and crimp neck vial ND11. PP Micro Vial with one of our seals can be obtained as a 2in1 KIT Special Push-On Cap with a thinner penetration point made of Polyethylene for Snap Ring Vials and Crimp Neck Vials ND11.

Main applications for Plastic vials are atomic absorption, water and protein analysis, capillary electrophoresis, ion chromatography etc.
Optimal choice when working with proteins. Ideal for IC applications

Zhejiang Aijiren Technology, Inc. is a global supplier of life-science, chemistry, laboratory consumables, etc. Our major products are high performance liquid chromatography & gas chromatography consumables such as Chromatography Autosampler Vials with closures, inserts, crimper and syringe filters, etc; Water analysis consumables such as COD test tube.

11mm Crimp Neck Conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm. High-quality glass vial for HPLC/GC analysis. 0.3 ml clear glass micro insert fixed in 2ml glass vials. 2ml clear glass vial with 0.3ml integrated vial, designed for valuable samples to save for testing use volume. Bottom fixed micro insert to keep the vial central vertical. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges. Standard vials for GC and HPLC.

Aijiren 2ml 10mm chromatography amber vials are constructed from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 2ml 10mm chromatography amber vials and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
Vial Dimension: 11.6*32mm
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

9mm Screw conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm. High-quality glass vial for HPLC/GC analysis. 0.3 ml clear glass micro insert fixed in 2ml glass vials. 2ml clear glass vial with 0.3ml integrated vial, designed for valuable samples to save for testing use volume. Bottom fixed micro insert to keep the vial central vertical. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges. Standard vials for GC und HPLC.

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance. A headspace vial is used in the process of top – gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial. The material of Headspace Vials is low extractable Borosilicate glass with low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance, and high chemical stability. Headspace Vials are suitable for headspace analysis of volatile solids and gases.

2 mL Standard Opening Vials from Aijiren. Our standard 2 mL vial is 12 mm in diameter, 32 mm in height, and has a 4.6 mm opening.

These polypropylene caps have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, and household oils. Polypropylene Hole Caps are known for good impact strength, cost effectiveness, and pliability.

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance. A headspace vial is used in the process of top–gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial. The material of Headspace Vials is low extractable Borosilicate glass with a low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance, and high chemical stability. Headspace Vials are suitable for headspace analysis of volatile solids and gases.

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance. A headspace vial is used in the process of GC  chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial. The material of Headspace Vials is low extractable Borosilicate glass with a low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance, and high chemical stability. Headspace Vials are suitable for headspace analysis of volatile solids and gases.

There is one type of Vial produced by Aijiren that has the best sealing performance, that is, 20mm Headspace Crimp Vial, but it coexists with the tight sealing characteristics of Crimp Neck Vial and there is also the problem of how to seal it. Aijiren provides a 20mm Hand Crimper and Decrimper to match the Crimp Vial. Aijiren’s handheld crimping machine provides a consistent and reliable seal, ensuring that the vial is securely sealed every time. The high-quality structure has been carefully designed, has durability and long life, and can provide smooth and simple operation. Manually adjustable stop, comfortable to hold the cushion, economical and durable.

Aijiren is the leading supplier of chromatography consumables, can offer hplc vials,hplc syringe filter, EPA VOA vials, and some other test tubes.
Any requirement for chromatography consumables, please contact us.

The classification of HPLC autosampler vials is generally done based on the diameter of the vial body, vial height, and thread finish.Our 2ml Screw HPLC Vials are the perfect fit for HPLC and GC instrument platforms across a wide variety of applications.

Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

Aijiren polypropylene screw micro vials can be used in most standard gas and liquid chromatography autosamplers. The PP micro vial is constructed from high-quality polypropylene, a chemically inert and durable plastic material known for its excellent chemical resistance. This material ensures that the vial does not react with or contaminate the sample. The vial features a threaded screw neck, which allows for a secure and airtight seal when the cap is screwed onto the vial. This feature is crucial to prevent sample evaporation and contamination. Aijiren PP vials combine the robustness of TPX PMP with the benefits of glass or PP micro inserts.

9mm screw thread vials are designed especially for use with Agilent’s and other rotating or robotic arm samplers 2ml, 12X32mm vials are manufactured of borosilicate glass and include a write-in patch for sample identification.

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

9mm screw thread vials are designed especially for use with Agilent’s and other rotating or robotic arm samplers 2ml, 12X32mm vials are manufactured of borosilicate glass and include a write-in patch for sample identification.

9mm screw autosampler vial with PP screw cap and PTFE septa is packaged in one box. This HPLC vial package can also be printed your logo on it. Do you want need this package?

Preassembled polypropylene snap-top closures with a 6mm center hole, including  PTFE/silicone septa. To use with 11mm snap-top vials. Snap caps provide a secure seal, minimizing evaporation even with volatile samples. Snap ring closures N11 should only be used in HPLC, as the punctual compacting pressure of the septum against the vial rim by the four pins in the cap does not achieve the same level of tightness as the evenly applied pressure through a screw thread or by crimping.

The crimp cover of the jaws is made of aluminum for crimping and sealing. Suitable for 20mm Crimp Top Headspace Vials.

Brand: Aijiren
Size: 11.6*32mm（with Write-on Spot）
Volume: 2ml Vial Diameter(mm):11.6±0.25
Vial Height(mm): 32±0.3
Mouth Diameter(mm):6.15±0.15
Quantity: 100 vials & 100 caps

2ml Clear Screw HPLC Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. 2ml Clear Screw HPLC Vial’caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

Advances in glass vial manufacturing now produce the type of threads that are needed to properly seal the vial and cap under pressure, producing a Screw Top Headspace System that works well together.
Sample: Provided Freely
Packing: 100pcs/pk
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Brand: Aijiren Tech

All 2ml HPLC Vials may appear to be created equal, but quality and performance make the difference when analyzing vital samples. Aijiren as a leading manufacturer in China, supplies high-quality chromatography consumables such as 2ml HPLC Vials with Cap and syringe filters.

The short thread ND9 Vials are primarily utilized to inject samples from an autosampler. They are sold in several sizes, although 2 mL vials are more generally used.
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

Magnetic Screw caps for CTC are novelties in the crimped neck-dominated Headspace market. However, especially for the hard-to-crimp magnetic caps, screw closures are a convenient alternative. It is constructed from metal, which ensures durability, strength, and resistance to environmental factors, making it suitable for long-lasting applications. The cap is equipped with a magnetic feature. This is extremely useful in precision work where screws need to be secured and placed accurately.

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)

18mm screw neck metal screw cap is made of magnetic metal, this cap is mainly used for seal 18mm screw GC headspace vial. PTFE septa can meet multiple punctures.
Steel Magnetic caps tolerate high temperatures and are suitable for use with the CTC/LEAP/Gerstel autosamplers.

Materials of construction: pp chamber, PP plunger outer housing, borosilicate glass plunger inner storage vial, silicone septa with PTFE liner, PP cap
Vial Size: 12 x 32 mm
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL
Maximum operating temperature: 122°F (50°C)
Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample

Autosampler vials for HPLC are generally grouped depending on the diameter of the vial, the height of the vial, and, the thread finish. Both clear glass and amber glass are highly inert.
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Vial Height(mm): 32±0.3
Mouth Diameter(mm):6.15±0.15

Aijiren HPLC, GC, and autosampler vial and 9mm blue screw caps products are manufactured to provide high-quality, state-of-the-art solutions for your most challenging, sensitive applications.
Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

The cap is made of aluminum. Aluminum is commonly used due to its excellent sealing properties and resistance to corrosion. The septa is a critical component of the cap and is made of silicone or PTFE (polytetrafluoroethylene).  It is positioned inside the cap and serves as a barrier between the sample and the external environment. The cap has a crimp top design, which means it can be securely attached to the vial by using a crimping tool. This process involves crimping the cap around the vial’s neck, creating a tight and tamper-evident seal. These caps with septa provide an effective barrier against contamination, evaporation, and changes in sample composition, ensuring that the sample remains stable and reliable for analysis. 

Graduated write-on marking spot area for easy filling and identification of sample, measures 0.5, 1.0 and 1.5ml. Amber glass vials are perfect for storing samples that are sensitive to light exposure. Clear glass vials are great for testing the solubility or dispersibility of materials, allowing you an unhindered view of the solution. These 9mm 2ml Short Tread Glass HPLC Vials are typically made from high-quality Borosilicate Glass or 1st hydrolytic-class glass. The choice of material is essential to prevent any chemical interactions between the sample and the vial, ensuring data accuracy.

Vial Dimension: 12x32mm
Vial Volume: 1.5-2.0ml
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers

2ml chromatography vials for HPLC. Aijiren’s 2ml chromatography vials have customized services such as the color of the pp cap, whether the vial has tick marks and label areas, and whether the customer’s brand logo is printed.

Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septum is non-toxic; the glue-free bonding process does not require the introduction of adhesives, and the septum retains the excellent resilience performance of silicone rubber or silicone, which is better than the glue-based process The septa are softer.

China High Quality 9mm Short Thread Caps with Septa for 10-425 thread vial Manufacturer

Aijiren 11mm snap ring vials have a volume of 1.5mL and eliminate the need for crimpers or decapping tools. Recommended for HPLC applications only. Snap ring vials eliminate the need for crimping and decapping tools. 40% larger opening improves sample accessibility and reduces the risk of autosampler needle damage. Optional white ceramic writing patch and fill marks for easy labeling. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short-term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

18mm Magnetic Screw Cap, Magnetic with Pre-fitted Silicone/PTFE Liner fit for 20ml headspace vials.
Manufacturer: Aijiren Tech
Transport Package: Pack
Production Capacity: 50000PCS/Day
Specification: 100pcs/pack

These polypropylene caps have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, and household oils. Polypropylene Hole Caps are known for good impact strength, cost effectiveness, and pliability. Septa sold separately.Polypropylene hole caps are available preassembled with separate septa or without septa. We also feature polypropylene hole closures with bonded septa to provide assurance that the septa will not slip away from the cap while injecting.

These glass vials are used in the environmental industry. Available in Flat bottom.
Clear. Type 1, Borosilicate, 33 Expansion. Also available in Amber, 51 Expansion.
Various sizes and capacities are available. Caps are sold separately.
(24-414 finish available by special order).