9mm blue screw caps with PTFE and silicone septa

There are many differences between butyl and natural rubber. Butyl rubber is a synthetic elastomer known for its excellent sealing properties, chemical resistance, and flexibility. The product also has low air permeability, good airtightness, and good resistance. Ozone resistance, chemical resistance, electrical insulation, flexibility resistance, heat aging resistance, energy absorption, and other characteristics.

Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

Laboratory 15mm Black Screw PP Cap ,9mm Center Hole,Closed-Top with PTFE Silicone Septa for 15-425 vials.Screw thread cap & septa that’s ideal for general laboratory use and storage of samples.

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.
Aijiren 10mm 2ml hplc autosampler vial is generally made of the high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert. the wide mouth of 10-425 vials can get a larger injection range, so this kind of bottle is often used to repeatedly clean the residual solution on the automatic injection needle.

Fused-insert sample vials work with both snap caps and crimp caps. These small samples fused-insert vials work with both snap caps and crimp caps. 11mm Glass Crimp Neck Vials with Fused Inserts are ideal for handling small-volume samples while delivering low residual volume. 11mm Glass Crimp Neck Vials with Fused Inserts offers the simplicity and functionality of typical micro vials at a fraction of the cost. 0.3 ml clear glass micro insert fixed in 2 ml glass vial. Bottom fixed micro insert to keep the vial central vertical. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges.

China High Quality 9mm Short Thread Caps with Septa for 10-425 thread vial Manufacturer

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; to ensure excellent functions, it is particularly suitable for gas chromatography, and to ensure that the septum does not fall into the sample vial during the injection process.
The adhesive-free bonding process is used to combine the polytetrafluoroethylene membrane and the silicon rubber or silicone bond together to maintain the excellent characteristics of the two materials. The polytetrafluoroethylene layer of the composite septum is in contact with the reagent. It is chemically inert and resistant to acid, alkali, temperature, and adhesion. It does not work with concentrated acid, concentrated alkali, or strong oxidants even at high temperatures. At the same time, the elasticity of silicone rubber or silicone layer can ensure sealing performance.

Amber 9mm HPLC Vials with Insert are universally suitable on most autosamplers, convenient in handling, and available in a broad selection of different cap colors and septum materials.

A 2ml snap autosampler vial is widely used in HPLC applications and can be used almost as universal sample vials for autosamplers, including sample vials with automatic operation. The vial features an 11mm snap ring closure, which provides a secure and leak-proof seal. These 2ml snap autosampler vials are recommended for short-term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal. Vials have a 40% larger opening than standard aluminum seal vials for easier sample filling and to reduce the chance of bent or broken needles during sampling. Compared with crimp top vials, snap vials can be capped and uncapped easily without tools, making it more convenient to use.

Aijiren is the leading supplier of chromatography consumables, can offer hplc vials,hplc syringe filter, EPA VOA vials, and some other test tubes.
Any requirement for chromatography consumables, please contact us.

18mm Magnetic Screw Cap, Magnetic with Pre-fitted Silicone/PTFE Liner fit for 20ml headspace vials.
Manufacturer: Aijiren Tech
Transport Package: Pack
Production Capacity: 50000PCS/Day
Specification: 100pcs/pack

Septa Material: PTFE/Silicone (White)
Usage: 20ml Headspace Vials
Production Capacity: 50000000PCS/Week
Specification: 100pcs/pack
Trademark:Aijiren
Origin: China

All 2ml HPLC Vials may appear to be created equal, but quality and performance make the difference when analyzing vital samples. Aijiren as a leading manufacturer in China, supplies high-quality chromatography consumables such as 2ml HPLC Vials with Cap and syringe filters.

Polypropylene vials are an economical alternative to glass for some applications. The vial is primarily constructed from high-quality, durable polypropylene or polymethyl pentene (PMP). This plastic is typically chosen for its chemical resistance, inertness, and transparency. Polypropylene is the most popular plastic material. Polypropylene vials have heat resistance of up to 135 degrees Celsius and are commonly used in chromatographic experiments. PMP has higher heat resistance – up to 175 degrees Celsius – and is transparent, increasing the sample’s visibility inside the sample bottle. The vial typically has a standard 9mm outer diameter, making it compatible with a wide range of autosampler systems commonly used in laboratories.

liquid chromatography is one kind of experiment way. The 9mm screw autosampler vial is compatible with Agilent, Shimadzu, Waters, Thermo Fisher and other instrument. In your experiment, No matter what questions was happened, you can tell our techincal engineer. They will give you solutions. Welcome to inquiry.

The cap material is a metal aluminum cover.Standard GC and HPLC sample bottles can be used for autosampler and sample storage. There are two designs round bottom and flat bottom.The crimp cover of the vials is made of aluminum for crimping and sealing; plastic (polyethylene, polypropylene, or phenolic resin) for non-crimping and sealing.

The cap is made of aluminum. Aluminum is commonly used due to its excellent sealing properties and resistance to corrosion. The septa is a critical component of the cap and is made of silicone or PTFE (polytetrafluoroethylene).  It is positioned inside the cap and serves as a barrier between the sample and the external environment. The cap has a crimp top design, which means it can be securely attached to the vial by using a crimping tool. This process involves crimping the cap around the vial’s neck, creating a tight and tamper-evident seal. These caps with septa provide an effective barrier against contamination, evaporation, and changes in sample composition, ensuring that the sample remains stable and reliable for analysis. 

The Aijiren hand crimper provides a consistent and dependable seal that allows secure vial closure each and every time. Hand-operated with adjustable stop,  There is a jaw pressure regulator on the operating handle and, Cushion grip for user comfort. The high-quality construction is engineered for durability and long life to provide a smooth and simple operation. tough jaws with a special metal alloy, to ensure long-term use. The adjustable hand crimper is ideal if you use varying thicknesses of septa in your analysis. This product has the ability to be adjusted for changes in septa thickness. The height of the cover is adjustable, through the bolt on the jaw head, with hexagonal. 

Headspace vials are designed to withstand high internal pressure, therefore all Aijiren brand headspace vials have a wall thickness of 1.2mm for added safety, thus it is assured that the vial will not burst. 
Capacity (mL): 20
Diameter (mm): 23
Height (mm): 75
Quantity: 100
Base Style: Round Bottom
Finish: Beveled Edge
Color: Clear
Marking Spot: NO

20mm crimp headspace vial is widely used in Headspace and GC, GCMS application.

Septa Material: PTFE/Silicone (White)
Usage: 20ml Crimp Headspace Vials
Production Capacity: 50000000PCS/Week
Specification: 100pcs/pack
Trademark:Aijiren
Origin: China
Payment: 100% T/T in advance

The 11mm snap-top caps are made of high-quality polypropylene. The caps have a roll-edge or snap-on shape. The snap-top caps provide a secure seal that minimizes evaporation even for volatile samples.

0.3 ml clear glass micro insert fixed in 2ml glass vial, designed for valuable samples to save for testing use volume

The 20mm 20ml Crimp Top Headspace vial has a 20mm outer diameter, which is the standard size for crimp-style headspace vials. The 20ml capacity refers to the volume of the vial, meaning it can hold up to 20 milliliters of liquid or gas sample. These vials are typically made from high-quality borosilicate glass. Borosilicate glass is chosen because it is resistant to chemical reactions and can withstand high temperatures, making it ideal for containing volatile samples without contamination. A headspace vial is used in the process of top – gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial.

The main application for HPLC, autosampler, chromatography, Agilent, waters machine. All autosamplers of Ajiren Tech are 100% integrity tested and manufactured according to ISO 9001 standard. If a 2ml screw HPLC vialsis required. Please contact Ajiren.

Laboratory 15mm Black Screw PP Cap ,9mm Center Hole,Closed-Top with PTFE Silicone Septa for 15-425 vials.Screw thread cap & septa that’s ideal for general laboratory use and storage of samples.

OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass
Vial Height(mm): 32±0.3
Mouth Diameter(mm):6.15±0.15
Quantity: 100 vials & 100 caps

Items: HPLC Septa
Material: PTFE/Silicone
Application: For HPLC Analysis
Sample: Free
Usage: Laboratory Analysis
OEM: Available
Certification: ISO9001:2022
Place of Origin: China (Mainland)

Glass autosampler vial, 4ml, 15mm x 45mm, used with 13-425 screw caps.
1.Ideal for general laboratory use and sample storage.
2.Chemically inert caps suitable for most chromatography and storage applications
3.Top grade PTFE/silicone septa used for cleanliness

9mm Screw conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm. High-quality glass vial for HPLC/GC analysis. 0.3 ml clear glass micro insert fixed in 2ml glass vials. 2ml clear glass vial with 0.3ml integrated vial, designed for valuable samples to save for testing use volume. Bottom fixed micro insert to keep the vial central vertical. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges. Standard vials for GC und HPLC.

The 2ml clear snap-top HPLC vials made by Aijiren have openings in three sizes: 8mm, 9mm, and 10mm. The 2ml clear snap-top HPLC vials are usually grouped according to the diameter of the vial, the height of the vial, and the finish of the screw.

Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

11mm Crimp Top Autosampler Vial for GC and HPLC. Vials have a 40% larger opening than standard opening aluminum seal vials, manufactured of Clear or Amber borosilicate glass. The standard 12x32mm profile is compatible with 11mm aluminum seal closures. The precision-shaped bottleneck can improve the processing capacity of the autosampler. In order to ensure good function, it can be slit in advance to facilitate needle penetration, designed for single injection or short sampling cycle, and especially suitable for liquid chromatography. 

2ml Clear Screw HPLC Vials and closures are universally suitable on most autosamplers, convenient in handling, and available in a broad selection of different cap colors and septum materials.

Sample storage vials, also known as chemical glass storage bottles, sub-packaging bottles, are suitable for the sub-packaging of various pharmaceutical intermediates, high value-added chemicals, biological preparations, cosmetics, cosmetics, essential oils and other products, suitable for long-term storage and transportation of products , Has excellent sealing performance.

The 2ml 10mm clear HPLC vials can be suitably employed to inject samples from an autosampler. They come in a variety of sizes, 2ml 10mm clear HPLC vials being ubiquitously used.
Vial Volume: 1.5-2.0ml
Clear: Amber and Clear
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA

There are some lab autosampler vial, these glass autosampler vials are hot sale in recently. 4ml screw autosampler vial, 9mm screw glass sample vial and ND11 crimp HPLC vial are also seen in chromatography laboratory. Most important, All of autosampler vial can be supplied in wholesale price. 1.5ml–4ml autosampler vial for chromatography analysis are in stock. welcome to inquiry.

2ml Amber HPLC vials are manufactured from Type 1 borosilicate glass, available in clear or amber, or from Polypropylene. Excellent for long-term storage. Deactivation and MS Certification are also available.
Size: 12*32mm
Application: For Autosampler
OEM: Available
Certificate: ISO9001:2021
MOQ: 1Packs

Aijiren has own R&D Center and Quality Controll Center to keep products in high quality. All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Vial Thread: Screw
Cap: Plastic open/solid cap
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk

Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

2ml Amber Screw HPLC Vials, caps, septa, and inserts working as a whole to prevent sample degradation and loss of samples caused by evaporation. Screw thread closures N9 (9mm) 2ml vials and closures are universally suitable on most autosamplers, convenient in handling and available in a broad selection of different cap colors and septum materials.

Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septum is non-toxic; the glue-free bonding process does not require the introduction of adhesives, and the septum retains the excellent resilience performance of silicone rubber or silicone, which is better than the glue-based process The septa are softer.

Wholesale 10-425 Screw Caps with Septa 7mm Centre Hole or Closed Top for Laboratory

Usage: Laboratory Analysis
Logo: Customized Accepted
OEM: Available
Sample: Provided Freely
Packing: 100pcs/pk
Material: Borosilicate Glass

Economical and convenient storage for samples of your hplc vials rack. PVC rack features a clear see-through lid. All hplc vials rack feature alphanumeric indexing for easy tracking of samples.
Color: Blue
Suitable: 2ml Vials
Racks feature alphanumeric indexing for easier vial identification.
Racks can be stacked for efficient storage.
Fits most 2.0 mL, 11.6 x 32 mm vials (vials sold separately).

Aijiren polypropylene snap ring micro vials can be used with most standard GC and LC autosamplers. These lightweight, economical vials are made from durable polypropylene with good chemical resistance. The tapered interior ensures maximum collection of contents without the hassle of removable inserts. With body size of 12*32mm makes it compatible with most autosamplers such as Agilent, Varian, etc. Snap/crimp top compatible with caps that are used with 11mm snap ring vial and crimp neck vial ND11.

Original Place: Zhejiang, China
Brand: Aijiren
Size: 11.6*32mm（with Write-on Spot）
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)
Usage: Laboratory Analysis
Logo: Customized Accepted

Amber 9mm HPLC Vials with Insert are universally suitable on most autosamplers, convenient in handling, and available in a broad selection of different cap colors and septum materials.

There are a lot of factors to consider when selecting a chromatography vial. Aijiren Tech offers a large selection of 0mm 10-425 HPLC vials and closures, including HPLC vials, inserts, caps, and septa to suit your analytical needs.
Vial Dimension: 11.6*32mm
Vial Volume: 1.5-2.0ml
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Vial Material: Borosilicate Glass/Glass Type 1

Browse 2ml 10mm autosampler vials and vial inserts in various sizes and closures with and without septa, including snap, screw, or crimp top vial closure options.Aijiren is the leading supplier of 2ml 10mm autosampler vials since 2007.
Vial Dimension: 11.6*32mm
Vial Volume: 1.5-2.0ml
Vial Thread: Screw
Vial Material: Borosilicate Glass/Glass Type 1
Application: Lab consumables for analysis

2ml Amber Screw HPLC Vials are a better choice used for most HPLC and LC-MS applications.2ml Amber Screw HPLC Vials can be made from a different coefficient of expansion glass; most notable 33-expansion and 51-expansion glass.

Chromatography septas can be pre-slit. A pre-slit septum is an ideal choice in applications requiring 20% or more of the sample injection each time from the vial so that suction is avoided. The slit allows ambient gas to equalize the gas in the vial so that a vacuum is not created in the vial from the tight seal around the needle. If coring or clogging from a narrow needle or needle deflection from highly durable septa material is a concern, then choosing a pre-slit septum is a better choice.
A PTFE/Silicone with a slitted septum allows for easier needle penetration as well as to release the vacuum that forms when a large volume of sample is withdrawn from a vial. This septum provides chromatographic characteristics similar to that of a septum without a slit except that the ability to withstand exposure to aggressive solvents is slightly lessened. Pre-slit septa are highly recommended for improving injection-to-injection reproducibility with autosamplers withdrawing greater than 50µL of sample from a 2mL vial, due to possible cavitation (vacuum).

Aijiren screw thread top autosampler vials design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial. The design of Aijiren screw thread top vials is developed in Europe and the United States, and the design feature is easy to use, especially the use of an automated sample introduction system.
Aijiren 10mm 2ml HPLC autosampler vial is generally made of high-quality imported expanded borosilicate glass tube. The high-cost performance of this material is the first choice for throughput analysis. The matching polypropylene bottle cap is chemically compatible, suitable for most chromatographic applications, and suitable for 6mm diameter micro-insert.

All materials are produced at 100,000 grade clean room. Passed ISO9001:2015 quality management system certification, RoHS compliance can also be provided.

2ml snap autosampler vial is widely used in HPLC applications and can be used almost as universal sample vials for autosamplers, including sample vials with automatic operation. The vial features an 11mm snap ring closure, which provides a secure and leak-proof seal. Snap ring closures are easy to use and ensure that the vial remains tightly sealed during sample storage and analysis. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal.

11mm Wide Opening Crimp Top Autosampler Vials are made of clear Type 1, Class A Borosilicate Glass with a writable label for sample identification.
Product Size: Pack of 100
Type: Target LoVial Clear Glass Vial
Vial Closure Size: 11mm
Vial Volume (Metric): 2mL
Description: Target LoVial, 2mL Clear Glass Vial
Item Description: 11mm Crimp Top Vial, Wide Opening
Volume (Metric) Working: 1.8mL

The Aijiren hand crimper provides a consistent and dependable seal that allows secure vial closure each and every time. The high-quality construction is engineered for durability and long life to provide a smooth and simple operation. The manual crimper is suitable for standard laboratory bottles and seals with aluminum caps. Compared with the metal handle design, the ergonomic arc-shaped handle provides higher hand comfort during use. The bottom handle can be held steadily, without the need for “extra” squeezing. The easy-to-see adjustment knob is located on the head of the crimping pliers, so you can easily determine when the desired crimp setting is reached.

Usage: Laboratory Analysis
Logo: Customized Accepted
Trademark: Aijiren
Origin: China
OEM: Available
Sample: Provided Freely

These headspace vials are made of superior quality 1st hydrolytic class glass (Type 1) and have a thicker glass wall to withstand higher temperatures and internal pressures for the analysis of volatile gas in the vial’s headspace.
Finish: Crimp Top with Bevel Finish
Pack Size:100
Colour: Clear
Type: Vial
Closure: Crimp
Closure Size: 20mm
Vial Height: 75mm

Our 9mm autosampler vials are available in both amber and clear. The associated 9mm autosampler vials caps and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
Product Name: China supplier 9mm autosampler vials for sale
Vial Volume: 1.5-2.0ml
Vial Material: Borosilicate Glass/Glass Type 1
Custom Order: Accept

Advances in glass vial manufacturing now produce the type of threads that are needed to properly seal the vial and cap under pressure, producing a Screw Top Headspace System that works well together.
Sample: Provided Freely
Packing: 100pcs/pk
Application: Lab consumables for analysis
Certification: ISO9001, SGS, COA
Brand: Aijiren Tech

These polypropylene caps have excellent sealing characteristics and offer good chemical resistance including acids, alcohols, alkalis, aqueous products, cosmetics, and household oils. Polypropylene Hole Caps are known for good impact strength, cost effectiveness, and pliability.

Micro vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

Materials of construction: pp chamber, PP plunger outer housing, borosilicate glass plunger inner storage vial, silicone septa with PTFE liner, PP cap
Vial Size: 12 x 32 mm
Pore Size: 0.22um and 0.45um
Capacity:
Unfiltered sample chamber: 500 µL
Filtered sample chamber: 330 µL
Maximum operating temperature: 122°F (50°C)
Minimum filtering sample volume: 220 µL placed into the chamber to obtain a 50 µL filtered sample

The Hand Decrimper is typically designed to work with two common crimp cap sizes, which are 11mm and 20mm. These sizes correspond to the diameter of the crimp caps, indicating their compatibility with specific vial sizes. This tool is typically made of durable materials such as stainless steel or high-quality aluminum. These materials are chosen for their strength and resistance to corrosion, ensuring long-lasting performance. The decrimping features a handle, often designed with ergonomic considerations for comfortable and efficient use by laboratory personnel. The handle provides a firm grip for precise control during the decrimping process.

Aijiren offers innovative high-recovery vials for comprehensive collection, automated handling, and storage, with the subsequent maximum retrieval of high-value samples.

9mm threaded vials are designed for use with Agilent and other rotary or robotic arm samplers. Sample vials are made of high-quality borosilicate glass or first-grade hydrolyzed glass. The cap is made of high-quality polypropylene. Our septa use only the highest quality materials to ensure proper function and can be pre-cut for easier needle insertion. Available in amber and clear colors, amber glass vials are ideal for storing light-sensitive samples. Clear glass vials are ideal for testing the solubility or dispersion of materials, allowing you to view the solution unobstructed.

9mm screw autosampler vial with PP screw cap and PTFE septa is packaged in one box. This HPLC vial package can also be printed your logo on it. Do you want need this package?

Material is Brosilicate Glass/1st hydrolytic class glass. 100pcs packed in one box. Available in clear and amber.

11mm Crimp Neck Conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm. High-quality glass vial for HPLC/GC analysis. 0.3 ml clear glass micro insert fixed in 2ml glass vials. 2ml clear glass vial with 0.3ml integrated vial, designed for valuable samples to save for testing use volume. Bottom fixed micro insert to keep the vial central vertical. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass makes it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges. Standard vials for GC and HPLC.

9mm screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

The 8-425 vial has an outer diameter of 8mm, which is a common size for HPLC autosampler systems. This standard size ensures compatibility with a wide range of autosamplers and other accessories. These vials are typically made from high-quality, Borosilicate Glass or 1st hydrolytic-class glass to prevent interactions between the sample and the container. Aijiren screw thread top sample vial design is characterized by universal ease of use, especially the use of automated sample introduction systems, so this type of vial is also called an autosampler vial. And this sample vial is extremely compatible. The 1.5ml sample vial we usually say is the 2ml volume sample vial.

Our polypropylene vials and crimp caps are the perfect fit for HPLC and GC instrument platforms across a wide variety of applications. Polypropylene Caps are known for good impact strength, cost-effectiveness, and pliability.

The cap material is a metal aluminum cover.Standard GC and HPLC sample bottles can be used for autosampler and sample storage. There are two designs round bottom and flat bottom.The crimp cover of the vials is made of aluminum for crimping and sealing; plastic (polyethylene, polypropylene, or phenolic resin) for non-crimping and sealing.

These septa are designed to work on most HPLC screw vials. Screw HPLC Vials offer the convenience of screw thread vials for vials that were originally designed for screw-top vials. They are available in both clear and amber glass.

8-425 screw thread caps and vials are suitable for Agilent, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and autosamplers.

15-425 Screw Sample Storage vials also named sample vials, are used in the package of biological agents, cosmetics, high-value chemistry and so on. Storage vials are suitable for the packaging of various pharmaceutical intermediates, high-value-added chemicals, chemical reagents, biological reagents, cosmetics, essential oils, etc. It is suitable for long-term storage and transportation for products and has excellent sealing performance. The “15-425” designation refers to the size and threading of the vial. It has a 15mm outer diameter. These vials are typically made from high-quality materials such as Borosilicate glass. 

These 2ml HPLC Vials with Caps are 40% large and are designed for use in robot autosamplers, known as Agilent. So welcome your inquiry about 2ml HPLC Vials with Caps and other chromatography vials from Aijiren.

Main applications for Plastic vials are atomic absorption, water and protein analysis, capillary electrophoresis, ion chromatography etc.
Optimal choice when working with proteins. Ideal for IC applications

Vial Dimension: 12x32mm
Vial Color: Amber and Clear
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Characteristic: Consistency at quantification levels
Highly reproducible for samples >120µL
Long-term sample stability for most analytes
High solvent compatibility for mainstream HPLC and GC applications
Compatible with standard HPLC and GC autosamplers
Customization:
Customized logo(Min. Order: 300 Packs)
Customized packaging(Min. Order: 400 Packs)

8-425 polypropylene screw finished cap with PTFE and silicone septa for chromatography autosampler vial, this screw cap can supply solid and hollow. Screw-top vials also come in different sizes, with vial caps made of either aluminum for crimp seals or plastic. Screw cap are available in 8-425 screw cap, 9mm screw cap, 10-425 cap, 13-425 cap and 24-400 cap.

These 20mm Crimp Top Aluminum Caps are typically made of aluminum, which is a lightweight and corrosion-resistant metal. Aluminum provides excellent sealing properties, ensuring the integrity of the sample within the vial. The cap features a crimp top design, which means it can be securely attached to the vial by using a crimping tool. This process involves crimping the cap around the vial’s neck, creating a tight and tamper-evident seal. 20mm Crimp Top Aluminum Caps often come in various colors, which can help with sample identification, organization, or differentiation of different products or solutions. The cap material is a metal aluminum cover. The design with a 9.5mm hole in the center of the cover can be used for headspace analysis. Standard GC and HPLC sample bottles can be used for autosampler and sample storage.

Headspace vials are a kind of laboratory vials for top space analysis, with the features of high-temperature resistance and corrosion resistance. A headspace vial is used in the process of top–gas chromatography. When detecting volatile or semi-volatile mixtures with high boiling points, we need to heat them to vaporize them at the top. In this process, since the liquid samples are at the bottom, the material in the top gas can be measured without touching the liquid in the sample vial. The material of Headspace Vials is low extractable Borosilicate glass with a low expansion rate, high-temperature resistance, high strength, high hardness, high light transmittance, and high chemical stability. Headspace Vials are suitable for headspace analysis of volatile solids and gases.

liquid chromatography is one kind of experiment way. The 9mm screw autosampler vial is compatible with Agilent, Shimadzu, Waters, Thermo Fisher and other instrument. In your experiment, No matter what questions was happened, you can tell our techincal engineer. They will give you solutions. Welcome to inquiry.

9mm Screw conical micro-vial for laboratory chromatography experiment, the micro-vial size is 11.6x32mm. High-quality glass vial for HPLC/GC analysis. 2ml clear glass vial with 0.3ml integrated vial, designed for valuable samples to save for testing use volume. Bottom fixed micro insert to keep the vial central vertical. Vials with integrated Micro-Insert are also available now in clear and amber glass. amber glass make it compatible with sun-proof samples. Their glass Micro-Insert is absolutely centered in the plastic mold and pressed firmly against the septa due to its slightly exceeding edges. Standard vials for GC and HPLC.

2ml Clear HPLC Vial with Cap is most often used in the diagnostic, analytical, or pharmaceuticals markets, but we’re seeing an increasing frequency of use in the Personal Care and Cosmetics for sampling and trial sizes.

The 11mm snap-top caps are made of high-quality polypropylene. The caps have a roll-edge or snap-on shape. The snap-top caps provide a secure seal that minimizes evaporation even for volatile samples. PTFE/silicone septa are the product of choice for most HPLC and GC applications where resealability and high purity are critical. Ideal for applications where ease of needle insertion is important. Silicone septa have strong re-sealing properties and can still maintain good sealing performance after multiple injections; PTFE is currently a material with good chemical conditions and can withstand strong acids and alkalis. After the two materials are combined, the bottle can be used for various laboratory purposes such as sealed sampling and chemical storage.

Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. Teflon and silicone rubber or ultra-pure silicone are used as raw materials to ensure that the septa are non-toxic; to ensure excellent functions, it is particularly suitable for gas chromatography, and to ensure that the septum does not fall into the sample vial during the injection process.
The adhesive-free bonding process is used to combine the polytetrafluoroethylene membrane and the silicon rubber or silicone bond together to maintain the excellent characteristics of the two materials. The polytetrafluoroethylene layer of the composite septum is in contact with the reagent. It is chemically inert and resistant to acid, alkali, temperature, and adhesion. It does not work with concentrated acid, concentrated alkali, or strong oxidants even at high temperatures. At the same time, the elasticity of silicone rubber or silicone layer can ensure sealing performance.

Our screw-top 2ml HPLC vials and screw caps are the perfect fit for HPLC and GC instrument platforms across a wide variety of applications, including pharmaceutical, environmental, energy and fuels, forensics, materials science, biopharmaceutical, proteomics, and metabolomics.
Vial Volume: 1.5-2.0ml
Vial Thread: Screw
Cap: Plastic open/solid cap
Septa: Non-slit, Pre-Slit, PTFE/Silicone
Application: Lab consumables for analysis

9mm 2ml Short Tread Glass HPLC Autosampler Vials have two different materials, one is borosilicate glass, and the other is imported first-grade hydrolytic glass, which can meet the different needs of customers; The 2mL Amber Screw Top Autosampler Vials are made from high-quality amber glass, providing excellent protection against light and UV radiation. The amber color helps to preserve the integrity of light-sensitive samples during storage or analysis. Amber glass vials are perfect for storing samples that are sensitive to light exposure. Clear glass vials are great for testing the solubility or dispersibility of materials, allowing you an unhindered view of the solution.

Main applications for Plastic vials are atomic absorption, water and protein analysis, capillary electrophoresis, ion chromatography etc.
Optimal choice when working with proteins. Ideal for IC applications

Aijiren COD Test Tube is made of borosilicate glass, which can reduce pH changes and pollutants that may be leached from soda lime glass. The glass digestion test tube can be used for analysis at temperatures higher than 130 degrees Celsius. It is manufactured from laboratory storage for a variety of general purposes and can hold almost anything. The SEPTA is made of PTFE silicon rubber gasket, which has a strong sealing performance and can resist various chemical corrosion. Used for municipal wastewater testing; industrial wastewater and process control testing; and environmental water testing. The used COD Tubetests contain strong sulfuric acid and other chemicals, so reagents must be handled carefully. The contents of the pipe should be disposed of in accordance with the requirements of local authorities.

11mm Snap Top Caps are made of high quality polypropylene, Caps have the profile of a crimp or snap closure for compatibility with robotic autosamplers, Pre-assembled septa reduces the chance of contamination during sample preparation, while saving sample preparation time in the lab.Snap caps provide a secure seal, minimizing evaporation even with volatile samples, The audible click ensures that a secure seal has been formed and the cap is properly applied.