9mm Short Thread Caps with Septa
Product
    • 9mm short thread caps
    • closed top screw caps
    • 9-425 cap size
    • short thread caps
    • 9mm screw neck caps
    • screw top caps for 9mm vials
    9mm short thread caps

    9mm Short Thread Caps with Septa

    Suitable for: 9mm Short Thread Vials
    Caps Material: polypropylene
    Septa Material: PTFE / Silicone
    Septa Size: 9*1mm
    Cap Features: 6mm Centre Hole or Closed Top
    Color: Blue, Black, Red, Yellow or Customized
    product description

    Description

    Caps

    Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble.

    Screw Cap Vials are universal. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap. Screw caps form an excellent seal and mechanically hold the septum in place during piercing. No tools are required for assembly. 

    The Screw Caps that are inlcuded with this kit are knurled on the sides for excellent gripping and comfort when applyting to the vial.

    Due to their artificially reduced cap height screw caps N9 don't have a standardized thread design. Therefore, it is recommendable only to use vials and closures from one source of supply, in order to ensure a harmonious and tight matching of both components.

    Septa

    PTFE/Silicone Septa:

    High quality, pure silicone is laminated to PTFE to give a pure, highly inert septum with excellent resealing characteristics even after repeated punctures.

    PTFE/Silicone septa are the preferred product for use in most HPLC and GC applications where resealability and high purity are critical. Works well for applications where ease of needle penetration is important.

    Septa-silica gel has strong repetitive sealability, and it can maintain good close performance after multiple injections; PTFE is a material with better chemical conditions at present, and it can withstand strong acids and alkalis. The two materials After compounding, the bottle can be used for various laboratory purposes such as sealed sampling, chemical storage and so on. 

    PTFE/Silicone/PTFE Septa:

    A layer of PTFE is laminated to each side of high purity, medium durometer silicone to form a septum that is the most resistant to coring while maintaining good resealing characteristics. The PTFE/Silicone/PTFE septum is recommended for the most critical applications such as ultra trace analysis or where there is a longer time between injections or for internal standard methods. PTFE/Silicone/PTFE septa provide superior performance with any autosampler employing a large diameter, blunt tip needle.

    Part No.

    Description

    S91

    White PTFE/Red Silicone Septa, Φ9*1mm

    S92

    Red PTFE/White Silicone Septa, Φ9*1mm

    S93

    Red PTFE/White Silicone/Red PTFE Septa, Φ9*1mm

    S944

    I Pre-slit Blue PTFE/White Silicone Septa, Φ9*1mm

    SX944

    X Pre-slit Blue PTFE/White Silicone Septa, Φ9*1mm

    C91

    9mm Blue Short Screw PP Cap, 6mm Centre Hole

    C92

    9mm Blue Short Screw PP Cap, Closed-top

    C93

    9mm Black Short Screw PP Cap, 6mm Centre Hole

    C95

    9mm Red Short Screw PP Cap, 6mm Centre Hole

    C97

    9mm Yellow Short Screw PP Cap, 6mm Centre Hole

    SC9191

    White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole

    SC91191

    Pre-slit White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole

    SC9291

    Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole

    SC92291

    Pre-slit Red PTFE/White Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole

    SC9391

    Red PTFE/White Silicone/Red PTFE Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole

    SC9192

    White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, Closed-top

    SC9194

    White PTFE/Red Silicone Septa, 9mm Black Short Screw PP Cap, Closed-top

    SC9196

    White PTFE/Red Silicone Septa, 9mm Red Short Screw PP Cap, Closed-top

    SC9198

    White PTFE/Red Silicone Septa, 9mm Yellow Short Screw PP Cap, Closed-top

    B-SC9291

    Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded

    B-SC92291

    Pre-slit Clear PTFE/White Silicone Septa, 9mm Blue PP Cap, 6mm Centre Hole, Bonded


    Advantages

    1.PTFE/Silicone septa are most popular for HPLC applications, and Pre-slit septa are easier to pierce with needles.

    2.Usually, the cap color is clear or blue, other special colors can be also produced accordingly.

    3.Easy to apply and easy to remove.

    4.Pre-assembled caps and septa are convenient.

    Company Introduction

    1. Founded in 2007, Zhejiang Aijiren, Inc. specialized in chromatography consumables, such as autosampler vial for HPLC, headspace vial, GC vials, micro inserts, septa and caps, syringe filter, etc, covers more than 10000 square meters, and has clean workshop more than 2000 square meters. 100, 000 class cleaning room;  

    2. 15 years export experience, exprot to more than 70 countries, 2000+ customs around the world; 

    3. More than 10 years experience for automatic analytica technique

    4. Aijiren has own R&D Center and Quality Controll Center to keep products in high quality.

    5. All materials are produced at 100,000 grade clean room.
    6. Passed ISO9001:2015  quality management system certification, RoHS compliance can also be provided.

    FAQ
    01.
    How to confirm product quality before placing orders?
    After production, all articles are delivered to QC center, only qualified products can be release to the next procedure.
    Meanwhile, you are welcome to ask for samples for testing.
    02.
    How to star order or make payment?
    Proforma Invoice will be sent first after confirmation or order together with our bank infomations.
    Pay by T/T, Westren Union or Alipay.
    03.
    What is the charge standard about the Samples?
    1) For our first cooperation, free samples will be provide buyer afford the shipping cost.
    2) For our old customers, we will send free samples, even though new design samples, when have stocks.
    3) Samples delivery date is 24 to 48 hours, if have stocks. Customer design is about 3-7 days.
    04.
    Can you provide OEM service?
    Yes, we had already do OEM service for more than 4 world famous Brand in chromatography area.
    05.
    What is the MOQ?
    For vials, caps and syringe filters MOQ is 1pack(100pcs), for hand crimper/decrimper MOQ is 1pack(1pc).
    Inquiry
    Related products
    Inquiry